Lorelli Trinity PRINT V1.1W.cdr Wi-Fi Camera Instruction Manual

: August 21, 2024
: lorelli

Trinity PRINT V1.1W.cdr Wi-Fi Camera

INSTRUCTION MANUAL

Scan the QR code to get more product information and manual instruction in more languages.

Download QR Scanner App onto your device.

PARTS LIST

IMPORTANT! READ CAREFULLY AND ®KEEP FOR FUTURE REFERENCE

CAUTION!

1. This product is an aid. It should nol bo used as a medical camera and should not replace adult supervision.
2. Never leave your child at home alone. You MUST check your child’s condition rogularly, do not loave thorn unattended by an adult

3. This device is not intended for use by people (including children) with impaired physical perception or mental impairments or without experience and knowledge if they are left without supervision and have not been instructed by a person in charge or lheir safely aboul the way of using this device.
4. The product is not a toy. Do not let your children play with it!
5. Uso this product only for its inlondod purpose, as described in lhis instruction manual.
6. Caution! The power cord of the camera must be plugged into an electrical socket located as far as possible from your baby. Place the camera as far as possible from your baby. Cables are a potential strangulation hazard. They must be located in a place inaccessible to children (at a distance of at least 1 meter).
7. Novorplaco tho camera in or ovor a baby’s bod or crib.
8. If you place the camera on a table or low cabinet, do not let the power cord hang over the edge of the table or worktop.
9. Do not submerge tho camora, its powor cord, or any part of tho product in water or any other liquid.
10. Do not touch a device that has fallen into water. If such an incident occurs, immediately unplug the cord of the power adapter if it was connected to the mains eleclricily.
11 Do not place the device in locations where water or other liquids may come into contact with it.

12. Novor uso tho camera in damp places or near waler, a bathlub, sink, wet room, etc.
13. Do not use the product in a highly polluted/dusty environment. This will shorten the life of the device.
14. Never place objects on the camera and never cover it.
15. Do not hlock the ventilation openings. Install in accordance with the manufacturer’s instructions. G

16. Before you connect the power cord of the product to the socket, ensure that the voltage marked on the adapter corresponds to that of tho local powor supply.
17. Power adapter AC 100-240 V.
18. Do not use the adapter if the cord or plug is damaged.
19. To avoid tho risk or oloclric shock, do nol opon tho camora housing.
20. Do not use the appliance if it is not working properly, if it is damaged, or if it has been dropped into water. You must contact the retailer where you purchased the product to have lhe faull repaired.
21. Do not attempt disassembly or repair of the device at home, this should be done only in an authorized service shop.
22. ATTENTION! Do nol install or storo tho camora or adaptor noar direct sources of heat, open fore, heaters, or stoves. Do not expose the camera to too low or too high temperatures or direct sunlight.
23. CAUTION I Uso and storo tho dovico at tomporaturos from -20’C to 40″C.
24. The video connection is established via en Internet network. We recommend that you ensure the safety of your personal data.
25. Caution’ Suflocation haLard’ Koop lho plastic packaging away from children.
26. This product contains small parts which can be a choking haLard. Assombly or installation by adults is roquirod. Koop tho small parts away from children when assembling.
27. Use only the power cord supplied by the manufacturer/importer.
28. To prevent an accident, replace a damaged adapter with an original one.
29. Do not try to modify the camera/adapter or to repair them by yourself in case of damage. For advice, contact an authorized sorvico conlro or tho rotail outlol whoro you bought lho producL
30. Do not use spare parts what are not original spare parts provided by the manufacturer or importer.
31. Tho illustrations in tho instruction manual aro only for roforonco and can differ from the actual product.

SAFETY TIPS

– Unplug the product during thunderstorms.
– It is important to check the operating range and condition of the camera on initial installation and regularly after that.
– Check the power supply regularly. Test the camera before use and after changing camera location.
– This product is intended for indoor use only.
– Do not cover any ventilation openings.
– Do not touch the plug pins with sharp or metal objects.
– To improve camera performance do not place the lens against or next to reflective surfaces, such as windows or white walls, because this will result in an overly bright image in areas close to the camera and darker image in areas further away from the camera or will make the camera produce white images.
– Make sure the camera is installed in an area with strong Wi-Fi signal.
Do not place the camera near objects that may affect Wi-Fi signal, such as metal objects, microwave ovens.

NOTE : The app version may have been updated, please follow the instructions of the current app version. When an important version update has been made, you will receive a push notification reminding you to update the app.

CLEANING AND CARE

1 . Do not wash the camera or the adapter with water. Do not use cleaning sprays or liquid detergents.

2. Do not use sharp objects or aggressive detergents to clean the device.
3. Before cleaning the camera you must unplug it.
4. Clean the camera lens only with a dry cloth. Clean the other parts of the camera with a damp soft cloth. Afterwards dry well with a dry soft cloth.
5. Before turning on the camera ensure that is it dry.
6. Unplug the device when not in use for extended periods of time, store the camera and its adapter in a cool dry place.

7. Caution! Keep the product away from children.

All products marked with this symbol are waste electric electronic equipment (WEEE)-tive 2012/19/EU)which should not he mixed with unsorted household waste. You must protect human health and the environment by handing in your waste oloctrical and oloctronic oquipmont to dosignalod collection points. Refer to the recycling recommendations of your local authorities.

In the Box

• Image 1

1.Camera, 2. Adapter, 3. Power cord, 4. Mounting bracket, 5. 3 pcs screws and anchors.

Device

Image 2

1 lnrrared lighl, 2. Slatus light. 3. Microphone, 4. Memory card slot, 5. Restart button, 6. Speaker, 7. Power cord slot

Installation

Picture 3

Place lho camera on a horiLonlal and lovol surface or mount ii on a wall/ceiling using the supplied mounting bracket, anchors and screws.

Mobile app

Image. -4.
To use lhe device, you need to install lhe CloudEdge app on your mobile device. CloudEdge is available for IOS and Android products. Scan the QR code to det the app directly.

INITIAL APP SETTING AND CONNECTION

• Image Group 5

Step 1-Open the application, tap ‘”Sign up now” to register by filling out the necessary information. If you already have a rogistralion, lap “Log in” lo log in lo lho applicalion
Step 2-Enter a valid email address and check the privacy agreement. tap “NEXT’ Enter a username and password, tap “Done.”
Slep 3-Tap lhe Add icon or lap “Add device”, select “Baby Camern”
Step 4 Plug in the camera and press “Next”
Stop 5 Pross and hold tho “Restart” button unlil you hoar a boop, the tap “Next”
Step 6 Select the Wi-Fir network and enter the password, tap “Next”
Step 7 Scan the QR code on your phone with the camera from a distance of about 15-25 cm and tap “Next” when the camera beeps, connecting may take up to 30 seconds.
Step 8 The camera is now connected to your device, lap “Next”
Step 9 By tapping “Next/Don?’·Skip” you can review the next pages with tips and suggestions, you can change the name of the camora by tapping ” , tap “Dono”

Functions

– Image 6

1. Screenshot- capturing a screenshot
2. Intercom -two-way audio connection
3. Record-video recording
4. Motion Detection -detection and !recking of movement

5. Lens Switch-switching off the lens

6. PTZ-Manual control of lho moniloring direction.
7. ( on the next page) Gallery “Saved images and videos”

8.Sottings menu

-Image 7

1. Device information
2. Receive event notification-on/off
3. App installation guide
4. Device sharing
5. Location management
6. Notwork oporalion indicator-on/ofT
7. Image settings
8. I luman detection and tracking-on/off
9. Privacy protection
10. Alarrn management
11. Recordings management
12. Cloud settings
13. ONVIF settings
14. Software version check
15. Removal of device from the app

TECHNICAL SPECIFICATIONS

Monitoring via IOS/1\ndroid phone or tablet via the CloudEdge app wilh omml rouistrution

Rosolution: 1920 (B)x 1080 (B)
Lena:3,6 mm
Sensor: 1/2.9″ 2Megapixel CMOS
Compression: 11.264
Wireless connectivity: 2.4 G WI-Fl (IEEEfl02.11/b/g/n}
Supported OS: ,os 9,1\ndroid 5 or later
Trigger an alarm: Smarl deleclion or motion/souncl
Soloclion of motion ,:ono: yos
Infra rod night modo -night visibility up to 1 Om
Two-way audio: yea
Maximum number of users: 6
MicroSD card slot (max 128GB, not included), cloud storage (not included)
Operating and storage temperature: – 20″C lo 40″C
Slopo: -15″~40″; Rotution around lho uxis: 0″ ~ 350″
Dimonsions: 73X78x121 mm
Weight 250 g ( camera I accessories)
USB power adapter – mains input voltage: AC 100-240V: Output voltage: DC 5.0V/ lf-‘Class: lfJX0

DECLARATION OF CONFORMITY

Name and address of the manufacturer:

HANGZHOU MEARI TECHNOLOGY CO., LTD.

ROOM 604 AND 605, BUILDING I, NO. 768 nANGHONG ROAD, CHANGHE STREET, BINJIANG, HANGZHOU, ZHEJIANG, CHINA
Name and address of the exporter:

HANGZHOU MEARI TRADING CO., LTD.
(SUBSIDIARY OF HANGZHOU MEARI TECHNOLOGY CO., LTD. FOR ALL EXPORT BUSINESS)
ROOM 503, 5™ FLOOR, BUILDING I, NO. 768 JIANGHONG ROAD, CHANGIIE STREET, BINJIANG, HANGZHOU, ZHEJIANG, CHINA
We hereby declare that our product, item number Speed 17S and the components of our product Speed l 7S delivered to DIDIS Ltd as 1028021 WI-FI CAMERA TRINITY comply with the requirements of the below listed Directives and

European standards:
Directive 2014/53/EU of the European Parliament and of the Council (RED):

Directive 2014/53/EU of the European Parliament and of the Council (RED):
EN 300 328 V2.2.2 (2019–07)
EN 301 489-1 V2.2.3 (2019-11)
EN 30 I 489-17 V3 .2.4 (2020-09)
EN !EC 62311 :2020
EN 62368-1:2020 + Al 1:2020

Directive 2014/30/EU of the European Parliament and of the Council (EMC):
EN 55032:2015+Al l:2020
EN 55035 :2017+Al l:2020
EN 50130-4:201 l +Al:2014
EN !EC 61000-3-2:2019+Al:2021
EN 61000-3-3:2013+A2:2021 +AC:2022-01
Directive 2011/65/EU of the European Parliament and of the Council (RoHS)
Regulation (EC) No 1907/2006 of the European Parliament and of the Council
(REACH)
Name: Jacky Song 1 Position: SALES SPECIALIST Maa,…1u11:::, ?
Signature: h
Place and date: Zhejiang, China, Jan. 08th, 2024

Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street Phone: +359 54 850 830
e-mails: home.market@didis-ltd.com;
export@didis-ltd.com

FREQUENTLY ASKED QUESTIONS

Q: The device cannol be visualised properly?

A: Ensure that everything is okay with the network, you can place the device closer to the router. If this does not work, it is recommended to restart lhe device and add il again.

Q: Why is the device still in the list of devices after restarting?

A Restarting the device only resets the network configuration of the camora, but cannot change tho configuration in tho app, you nood lo delete the camera from the app.

Q How can I connect the camera to another router?

A: First remove and reslart Iha device in the app and then reconflgure Iha duv1co via lhu app.

Q: Why doos tho dovico not rocognizo tho MicroSD card?

A: It is recommended to insert the card after disconnecting from Iha power source. [nsure that the card is accessible, and the format is f-AI 32. If the Wi-H signal is poor, the card also may not be recognized. Q: Why can’t I receive notifications on my mobile phone app?

A: Please make sure lhal lhe applical,on is running on lhe phone, lhal lhe reminder runctiun in question is open, and that the messane notiflcation und authoriLolion conflrrnation in lho rnobilo pt1ono systorn uro opon.

Q: What is tho moaning of tho light indications of lho dovico?

A: rlashing red light: wail for network connection (slow) network connection (fast) Steady blue light: the camera is working properly. Steady red light: The camera is not working