Danfoss SHA System Units Instructions
- August 21, 2024
- Danfoss
Table of Contents
Danfoss SHA System Units
Instructions for the Bock installation of the system units
- Only expert personnel is allowed to handle the refrigerating units!
- Installation of the unit horizontally on rubber plates (packed-with) or, if need be, also rigidly mounted.
- Preferably to be installed on foundation floor, if possible avoid installation on wall consoles. (structure-borne noise)
- Provide sufficient free space for maintenance works. (e.g. cleaning of the condenser etc.)
- In case of air-cooled units unhindered air ventilation of the condenser must be provided.
At the SHA/SHG series the compressor is fitted on the units base plate with vibration absorbers in between. Inlet tubes to the compressors (such as suc- tion or pressure lines) have therefore as a rule to be provided with the appropriate compensation elements (e.g. corrugated hoses) in order to absorb the vibrations.
Transport safety device: The vibration-absorbing elements under the
compressors mounted in the system unit SHA/SHG are blocked so as to avoid
damages during the transport. This safety device (marked by a red adhesive
label) has to be removed before the setting into operation!
For outdoor installation provide for weatherproof protection.
Danfoss A/S
Climate Solutions • danfoss.com • +45 7488 2222
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>