rocstor Y105009-81 SCM8 Solid Connect User Manual
- August 21, 2024
- rocstor
Table of Contents
rocstor Y105009-81 SCM8 Solid Connect
Package Content
Please check the following items before installation. If any items are missing, please contact Rocstor or the installing company.
- 1 x SolidConnect SCM8
- 1 x AC power cable
- 1x User manual
Application
The SolidConnect SCM8 represents an 8-port PoE Gigabit Ethernet Switch
designed specifically for security monitoring purposes. It is tailored to
enhance Ethernet HD monitor security systems and Ethernet projects
effectively.
This product seamlessly incorporates the essential attributes of security
monitoring. It boasts swift packet forwarding capabilities, ensuring efficient
data transmission. With complete gigabit transfer rates, it delivers ample
bandwidth to guarantee crystal-clear images and seamless transmissions. It
perfectly caters to the high-bandwidth demands of high-definition video
content.
Login Information
| IP Address | 192.168.1.1 |
|---|---|
| Subnet Mask | 255.255.255.0 |
| Default Gateway | 192.168.1.254 |
| User Name | Admin |
| Password | admin |
Features
- Adheres to IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, IEEE 802.3af, and IEEE 802.3at standards.
- Equipped with 8 10/100/1 000Base-T ports and 2 Gigabit SFP ports.
- Features 8 PoE+ injectors, offering a combined built-in power supply of 130W.
- Total 120W PoE power on 8 ports – 30W power per PoE port.
- Boasts a substantial backplane bandwidth of 20 Gbps.
- Supports IEEE 802.3x flow control for optimized data transmission.
Board Diagram
Solid Connect SCM8
-
Front
-
Back
Installation Steps
- Before beginning installation, ensure that both the signal power and display device power are turned off. Installing with power could result in damage to the transmis sion equipment.
- Connect each PoE IP camera and one of the 8 ports of the product using network cables.
- Establish a connection between the uplink port of the equipment and the NVR or computer using a network cable.
- Plug in the AC power source.
- After completing the installation, verify that all components are correctly positioned, the equipment is in good condition, and the connections are stable. Once confirmed, you can proceed to power on the system.
- Make sure that the Ethernet equipment is powered and functioning properly.
By following these steps, you can perform a safe and effective installation of your equipment. Remember to exercise caution when dealing with electrical connections and refer to the manufacturer’s instructions for specific details related to your product.
Troubleshooting
If you encounter any issues with the equipment, kindly follow these steps:
- Ensure the equipment is installed according to the manufacturer’s installation guide.
- Verify that the RJ45 cable order complies with the EIA/TIA568A or 568B standard.
- Note that each PoE port can only provide a maximum power of less than 30W. Avoid connecting PoE equipment requiring power over 30W.
- If problems persist, consider replacing the equipment with a fully functioning 8 ports PoE Ethernet Switch to assess for damages.
- Should the trouble persist, please get in touch with your vendor for further assistance.
Plug Producing Method
Required Tools: Wire crimper, network tester, and RJ45 plug with wire sequence conforming to EIA/TIA568A or 568B.
Instructions
- Strip off 2cm of the insulating layer to expose the 8 pairs of UTP cable.
- Separate and straighten the 8 pairs of UTP cable.
- Arrange the 8 cables according to EIA/TIA568A or 568B standard.
- Trim the cables, leaving 1.5cm of bare wire exposed.
- Insert each cable into the appropriate pin of the RJ45 plug.
- Utilize the wire crimper to securely crimp the RJ45 plug.
- Repeat the process to create additional ends as needed.
- Use the network tester to verify the cable’s functionality.
When choosing an RJ45, ensure that if one end is EIAITIA56BA, the other end is also EIAITIA56BA. Lil When choosing an RJ45, ensure that if one end is TIA EIA 5688, the other end is also TIA EIA 5688.
Specification
| Item| Description
---|---|---
Power| Power supply| Built-in power supply
Voltage Range| AC100~240V
Consumption| 120W for 8 PoE
Ethernet| Speed| 1~8 Port:10/100/1000Mbps
9-10 :1000Mbps SFP port ( SFP support optical module rates:1.25Gbps)
Transmission Distance| 100 Meter(328ft)for RJ45
SFP optical module is optional, and the transmission distance depends on the optical module
Network Switch| Ethernet Standard| IEEE
802.3/802.3u/802.3x/802.3ab/802.3af/at
Switching capacity| 20G
Transfer Rate| 14,880 pps for Mbps
148.B00pps for 100Mbps
1.488,000ppsfor 1000Mbps
MAC Address| 8K MAC address table
LINK / ACT| On| Green| The port is connecting
Blinks| | The port is receiving or transmitting data
Off| | The port is not linked successfully with the device
PoE| On Orange| PD is connected
Off| No PD is connected or power forwarding fails
PoE pin assignment| V+(RJ45 Pin 1,2). V-(RJ45 Pin 3,6)
Environment| Working Temperature| o·c – 4o•c (32°F- 1D4°F)
Storage Temperature| .4o •c -1o · c (•4D°F- 1ss· F)
Humidity Non condensing| 0-85%
**** Mechanical| Dimension| 270 x 180 x 44mm
Color| Black
Specifications are subject to change without prior notice.
Warranty Information
This product is backed by a (5) five-year warranty. Rocstor warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. Rocstor does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of Rocstor, Inc. and Rocstor (or their
officers, directors, employees or agents) for any damages (whether direct or
indirect, special, punitive, incidental, consequential, or otherwise), loss of
profits, loss of business, or any pecuniary loss, arising out of or related to
the use of the product exceed the actual price paid for the product. Some
states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this
statement may not apply to you.
Customer Support
Technical support is available to all the registered users of Rocstor products
.
Technical Support/ RMA
Hours: 9:00 am – 5:00 pm PST
Monday to Friday (except holidays)
Tell:+ 1 818-727-7000 (National
and international)
Fax:+1 (818)875-0002
Email: support@Rocstor.com
Copyrights
Tell:+ 1 818-727-7000 (National and
international)
Fax:+1 (818)875-0002
Email: support@Rocstor.com
©2023 Rocstor, Inc. All rights reserved. Rocstor is registered trademark of
Rocstor, Inc. Feature and specification are subject to change without notice.
All trademarks and registered trademarks are the property of their
respective. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>