Stetsom vt-3 DIGITAL VOLTIMETER User Manual
- June 5, 2024
- STETSOM
Table of Contents
Stetsom vt-3 DIGITAL VOLTIMETER
Introduction
The digital voltmeter VT-3 can be very helpful in automotive electrical systems. It monitors the battery voltage and can indicate if there are any deficiencies
in the system functioning as a true power manager.
Description, installation and operation:
- Red Wire (+12V) – Should be connected to positive in the battery, preferably with the power of the amplifier.
- Black Wire (GROUND) – Should be connected to negative in the battery, preferably with the power of the amplifier.
- Desconnected.
- Blue Wire (REMOTE ENTRY) – Should be connected to remote output of CD/MP3 player. This wire sensor do the voltmeter turn on automatically to the command of CD/MP3-player.
- Green Wire (REMOTE OUTPUT) – Should be connected to remote input of the amplifiers. This wire controls the operation of amplifiers. The maximum output current is 500 mA. If this current is exceeded, the voltmeter turn off the amplifiers indicating “SHO” display (SHORT).
- Button ON/OFF/MAX/MIN/RESET – This button allows the observation of measures maximum and minimum recorded by the VT-3, as RESET/ON/OFF the device manually.
- Display Voltage Indicator – Allows easy reading, even in situations of high luminosity
FUNCTIONS
The VT-3 remain in STANDBY until the button is activated VT-3 or Radio/CD/DVD-
MP3 Player. 
PROTECTIONS:
Short on REMOTE Output Voltmeter
Specifications
- Voltage range: 7V ~ 18V
- Consumption: 50 mA
- Consumption Standby: 11 mA
- Output current remote Out: 500 mA
- Dimensions (L x C x A): 75 x 110 x 35 mm
- Weight: 90g
WARRANTY TERM
STETSOM, through its network of Authorized Technical Assistance Providers, guarantees technical assistance to the purchaser of their products. The repairs of any defects duly established as being of the manufacturer will be done without cost for replacement components or parts and repair labor. The repairs will be done by the Authorized Technical Assistance Provider specially designated by STETSOM.
CONSULT THE LIST OF AUTHORIZED TECHNICAL ASSISTANCE PROVIDERS ON OUR
WEBSITE: :
www.stetsom.com.br/en/assistencias-tecnica
If you do not locate technical assistance in your city, please contact us at:
BR +55 18 2104-9412
WARRANTY CONDITIONS:
Our warranty is 1 (one) year against manufacturing defects. Its validity
starts on the date of the Sale to the FINAL Consumer.
To make use of the benefits of this warranty, you must present one of the
following documents: the Final Consumer’s SALE NOTE or this completed
CERTIFICATE.
CASES THAT VOID THE WARRANTY:
- 1 year after the issuance of the invoice of sale to the consumer or 1 year of completing certificate of warranty (dated and stamped by the retailer or installer) or 1 year from date of manufacture.
- Violation of seals, alteration or removal of the product’s serial or lot number.
- If the product suffers misuse, careless accidents involving: Water, Fire or Fall, or is installed in conditions contrary to the guidelines contained in the installation manual that accompanies the product.
- Damages and changes in the circuit or adaptation of non-original parts.
- If you use installation techniques contrary to those given in the manual.
QUESTIONS AND ADVICE:
STETSOM offers Customer Services to answer questions and give advice about
their products and services. Please contact us through the channels:
Phone: BR +55 18 2104-9412
E-mail: suporte@stetsom.com.br
Site: www.stetsom.com
RUA MARIANO ARENALES BENITO, 645 – DISTRITO INDUSTRIAL – CEP 19043-130 – PRESIDENTE PRUDENTE – SP
References
- Stetsom - Stetsom
- Stetsom - Stetsom
- Assistências TécnicaTechnical AssistanceAsistencias Técnica - Stetsom
- Assistências TécnicaTechnical AssistanceAsistencias Técnica - Stetsom