Danfoss KP 61 Thermostat Pressure switch Installation Guide
- August 20, 2024
- Danfoss
Table of Contents
Danfoss KP 61 Thermostat Pressure switch
Specifications:
- Model: KP 61, KP 62, KP 63, KP 68, KP 69
- Charge Type: Vapour charge, Adsorption charge
- Protection Rating: Drip proof IP30 (EN 60529)
- Electrical Ratings:
- AC 1: 16A
- LR 112A
- AC 3: 16A
- AC 15: 10 A
- Voltage: 400V when used according to UL regulations
- Refrigeration Controller : Listed refrigeration controller 61B5
Product Usage Instructions
Installation:
- Disconnect power supply before starting installation.
- Use copper wire only for wiring connections.
- Follow the specified tightening torque of 20 lb.in for secure connections.
Electrical Connection:
- Ensure power supply is disconnected before making any wiring connections.
- Do not touch live parts with bare fingers or tools to avoid electrical shock.
Manual Trip Function:
For models KP 61, KP 71, KP 73 with manual trip function, refer to the
corresponding part numbers for additional information on installation and
usage.
KP 61, KP 62, KP 63, KP 68, KP 69 vapour charge
KP 62, KP 71, KP 73, KP 75, KP 77, KP 78, KP 79, KP 81, KP 85 adsorption
charge (cross ambient)
Installation guide
Electrical rating – General
When used acc. to UL regulations
not applying for KP 85
CAUTION:
Disconnect power supply before wiring connections are made or service to avoid
possible electrical shock or damage to equipment.
Do never touch live parts with your fingers or with any tool.
Manual trip function
Vapour charge
Frequently Asked Questions (FAQ):
Q: What is the protection rating of the product?
A: The protection rating is Drip proof IP30 (EN 60529).
Q: Can I use any type of wire for electrical connections?
A: No, only copper wire should be used for wiring connections.
Q: How should I handle the manual trip function?
A: Follow the specific instructions provided for models KP 61, KP 71, KP
73 with manual trip function.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>