IQ sound IQ-5415DJBT Bluetooth Speaker Instruction Manual
- August 20, 2024
- IQ sound
Table of Contents
IQ sound IQ-5415DJBT Bluetooth Speaker
Carefully read the operating manual to operate this unit properly, and keep this manual handy for further reference.
PANEL FUNCTION
- USB
- TF
- LINE IN
- MIC 1
- MIC 2
- DC 15V
- M.VOL
- M.ECHO
- M.DELAY
- MIC PRE
- MENU
- RPE EAT
- TWS
- LED MODE
- PAUSE
- REV
- REC
- NEXT
- MODE
- VOLUME
REMOTE CONTROL FUNCTION
- POWER
- MODE
- STOP
- MUTE
- Control prev key
- Play/pause control key
- VOL+
- Control next key
- VOL-
- REPE
- E/Q
- 0-9
FUNCTION DESCRIPTION
WIRELESS MICROPHONE
- Turn on the wireless microphone.
- Control the volume of the MIC by rotating the Mic knob.
- Control the echo effect by rotating the Echo knob.
WIRED MICROPHONE
- Connect the wired microphone to the MIC input jack located on the front panel of the speaker.
- Control the volume of the MIC by rotating the Mic knob.
- Control the echo effect by rotating the Echo knob.
BT Connection
- When using the Bluetooth, please tap Settings, then open “Bluetooth”
- Scan from your phone, tablet, or notebook for “IQ-5415DJBT” and pair the device to listen to audio files through the speaker.
- Unpair from the speaker when finished listening.
FM FUNCTION
- Choose”MODE” to switch to FM radio
- Choose PLAY/PAUSE” for automatic searching and saving.
- Choose”PREV” and”NEXT” to switch channels.
Mic. Priority
- To activate the Mic. Priority function, press the “MIC. Priority”| button on the speaker.
- This function will automatically decrease the volume level of the music while the microphone is used.
Using Aux( LINE IN 3.5mm)
- Press the audio input on a unit main panel on the top
- Insert the Aux cable plug into the Aux input, then connect with your phone, tablet, or notebook for use.
- Pull out the cable when finished listening.
Recording function
- Insert a USB pen drive or a Micro-SD card into the USB port or Micro-SD slot.
- Connect the wired microphone.
- Press the “REC” button to start recording your song.
- Once finished, press the “REC” button once more.
- The recording will start to playback.
- The recordings are saved into the USB pen drive or Micro-SD slot.
TWS mode
- Press The ‘button or one of the speakers. the two speakers will connect automatically
- Playee your mobile device via Vice Energy True Wireless Stereo experience as each speaker will act as left and right
Charging Instructions
- The IQ-5415DJBT takes approximately 8 hours to fully charge.
- The unit will automatically begin charging once the adapter is connected to the DC 15V charging port.
- When the battery is full, the charge indicator turns green color With standard usage, a fully charged battery can play for about 2 hours.
USB AND MICRO SD CARD
- Insert a USB flash drive. USB mode will start automatically. MP3 playback via USB (Max 32GB)
- Insert a Micro SD, SD mode will start automatically. Mp3 playback via
Micro SD (Max 32GB)
The accessories included package contains
- Instruction book.1PC
- 15V Adapter.1PC
- Wireless Mic… 1PC
- Aux LiNe control. 1PC
- Remote control…..1pc
Warranty
Basic Warranty Statement
Supersonic Inc. (“Supersonic”) warrants this product to the original purchaser
ONLY, to be free from defects in materials and workmanship under normal use,
for ninety (90) DAYS from the date of original purchase. Proof of purchase
(receipt)
required. Please visit
http://www.supersonicinc.com/warranty
for additional information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions, compliance with exposure
requirements
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>