element EPSBAE20 2.0 Outdoor Sound Bar User Manual

: August 20, 2024
: Element

Table of Contents

element EPSBAE20 2.0 Outdoor Sound Bar
WHAT’S INCLUDED
MOUNTING YOUR SOUND BAR
SOUNDBAR PANELS
REMOTE CONTROL
TROUBLESHOOTING
SOUNDBAR SPECIFICATIONS
FCC STATEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

element EPSBAE20 2.0 Outdoor Sound Bar

WHAT’S INCLUDED

FOR YOUR ATTENTION

Please read through this manual before making connections and operating your new sound bar.
Retain this manual for future reference.
Do not open the cabinet of this unit; there are no user-serviceable parts inside.
Refer servicing to qualified personnel only.
Switch off the unit when not in use. Switch off the unit and disconnect it from the AC power supply when not in use for an extended period.
Do not install the unit in direct sunlight but in an area that is partially shaded. Choose a location and position based on the time of day you use it most often.
Install the unit at least five feet away from a pool, spa, or other body of water.
The sound bar should not be exposed to dripping or splashing, and objects filled with liquids should not be placed on top of the unit.
Install the unit on a horizontal, flat, and firm surface with good ventilation. Never block the vents which will cause malfunction, resulting from overheating.
Use a soft and clean rag to clean the outside of the unit. Never clean it with chemicals or detergent.
This user manual is a guide for operation, not a criterion for configuration.
Only use attachments/accessories specified by the manufacturer.
Where the main plug is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
The lightning flash is intended to alert the user to the presence of dangerous voltage within the product’s enclosure, and touching the internal components may result in a risk of electric shock.
The exclamatory mark is intended to alert the user to the presence of important operating instructions.

CAUTION
To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified service personnel.

MOUNTING YOUR SOUND BAR

IMPORTANT: Choose a location for your sound bar where it will not be in direct sunlight and is partially shaded (i.e. near trees, under structures, patio cover, etc.)Remember that the position of the sun changes throughout the day, so choose a location and position based on the time of day you would use it most often.
WARNING: The sound bar must be installed at least five feet away from a pool, spa, or other body of water.

MOUNTING YOUR SOUND BAR (continued)

The center distance is 29.56 inches.
Mark the location of the screws on the wall.
Drill two holes in the wall with a powerful drill.
Fasten the screw expansion tube to the hole in the wall.
Fasten the iron bracket to the expansion tube of the wall with screws.
Install the speaker on the iron bracket to make it firm and stable.

SOUNDBAR PANELS

INDICATOR LIGHT DISPLAY

Function Switching
Volume
ON/OFFRed light: Standby mode
Blue light: BT mode
Greenlight: ARC mode
White light: AUX mode
RC input port: Connect to a TV with HDMI ARC function.
AUX input port: Connect the AUX one-to-two audio cables, and connect with the red/white output port of the audio source device.
Power interface
Connect the power adapter.

SOUND BAR PANELS (continued)

CONNECT TO YOUR TV

There are 2 ways to connect your sound bar to the TV:
AUX Good Quality (cable not included)
ARC input port: Best Quality (cable included)

ARC (AUDIO RETURN CHANNEL)
If you choose the ARC connection, please make sure your TV or device supports the HDMI ARC feature. ARC is an audio return channel function for digital audio. Use the supplied ARC cable to connect to the HDMI ARC input of your sound bar and the HDMI ARC output on your TV or other external device. Note that the external device audio output must be set to PCM manually. See your TV user manual for details.

CONNECTIONS

This soundbar has an extra group of audio input terminals.

AUX

Connect your sound bar to your TV or other external devices such as a CD, VCR, DVD player, etc. by connecting an AUX input cable (cable not included) to your sound bar
and the AUX output of your external device. Press the button on the remote control to switch to the AUX input mode. The word LINE will show on the display screen which means AUX mode is selected.

REMOTE CONTROL

Remote control operation
Insert the batteries into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 8 meters from the sensor and within an angle of about 30 degrees from the left and right sides.

Battery installation

Remove the battery compartment cover on the back of the remote.
Load two AAA/1.5V batteries into the battery compartment making sure that the battery has been inserted with the correct polarities matching the symbols +, and – as indicated inside the battery compartment.
Replace the cover.

NOTE

Remove the battery when you do not intend to use the remote control for a long time.
A weak battery can leak and severely damage the remote control.
The battery must not be exposed to excessive heat sources, such as sunshine, fire,, or anything that would dramatically raise the temperature of the battery.
Be environmentally friendly and dispose of batteries according to local government regulations.

Protective remote sleeve
Place the remote inside the protective sleeve for added protection against falls or condensation. The protective sleeve is not weather-proof. Please properly store your remote indoors when not in use.

REMOTE CONTROL (continued)

POWER
Remote control or host button to switch the signal source to BT state, the blue indicator will flash, the phone will turn on the Bluetooth, search for the device, and the connection and pairing are successful.

MUTE

SOUND EFFECTS
MOV: movie mode
MUS: music mode
NEWS: news mode

AUDIO SOURCE SELECTION
Sound source selection key, RGB light cor- responding status “ARC, AUX” indicates that the corresponding input sound source on the backplane has entered the working state.

PAIR
Tap to disconnect BT, then tap to link BT.

TROUBLESHOOTING

Use the chart below to troubleshoot any issues you may be having. If you do not see your issue listed below, or the troubleshooting guide does not solve your issue, please contact Element customer support.

SOUNDBAR SPECIFICATIONS

REFERENCES
Element TV Company, LP. bears no responsibility for data and/or information that is compromised during a wireless transmission.

This system uses the 2.4 GHz frequency band.

Certification

This system conforms to the frequency restrictions and has received certification based on frequency laws.
Thus, a wireless permit is not Necessary.
The actions below are punishable by law in some countries: breaking apart or modifying the unit.
Removing specification indications.

Restrictions of use

Wireless transmission and/or usage with all Bluetooth-equipped devices is not guaranteed
All devices must conform to standards set by the Bluetooth SIG, inc.
Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.
This system supports Bluetooth security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.
This system cannot transmit data to a Bluetooth device.

Range of use

Use this device at a maximum range of 10 m.
The range can decrease depending on the environment, obstacles, or interference.

Interference from other devices

This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this
unit is located too close to other Bluetooth devices or devices that use the 2.4 GHz band.
This system may not function properly if radio waves from a nearby broadcasting station, etc. are too strong

Intended usage

This system is for normal, general use only.
Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (for example: airports, hospitals, laboratories, etc.).

LICENSE

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE Rises in this are tested ano proud to family i the lina for Clare dinar device Du great to an a nation. mit can agents a use are ensemble audio reunions one not real a used at order win the occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RADIATION EXPOSURE STATEMENT
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

LET’S REGISTER YOUR PRODUCT
It’s super easy, just head on over to

BENEFITS OF REGISTERING YOUR PRODUCTelementelectronics.com/register

WE’RE HERE TO HELP

Find resources and get help with product setup, connecting devices, technical issues, downloading manuals, and more!

We’re available 24 hours a day, 7 days a week at elementelectronics.com
1.888.842.3577 customerservice@elementelectronics.com

Element offers environmentally responsible options to recycle your unwanted consumer electronics devices. More information can be found by visiting: www.elementelectronics.com/sustainability Element, the Element Logo, and Bring it Home are trademarks of Element Brand Holding, LLC. All other trademarks are the property of the respective owner who has not sponsored, endorsed, or approved this product. ©2024, Element Brand Holding, LLC, All Rights Reserved.