SEALEY TSTPL01 2 IN 1 Pen Light and Tyre Pressure Gauge Instruction Manual

August 19, 2024
SEALEY

SEALEY TSTPL01 2 IN 1 Pen Light and Tyre Pressure Gauge

SEALEY-TSTPL01-2-IN-1-Pen-Light-and-Tyre-Pressure-Gauge-
fig-1

Product Specifications

  • Model No: TSTPL01
  • Pressure Units: PSI, BAR, KPA, Kg/cm2
  • Range: Varies based on unit selected
  • Resolution: Not specified
  • Battery Type: Not specified
  • Input (USB Type-C)
  • Charge Time: Not specified
  • Work light Source: TOP LIGHT, MAIN LIGHT
  • Work light Brightness: Not specified
  • Work light Runtime: Not specified
  • Torch Source: TORCH SOURCE
  • Torch Brightness: Not specified
  • Product Dimensions (L x D x W): Not specified
  • USB Type C Cable Length: Not specified

Product Usage Instructions

Safety:

  • Keep the gauge out of reach from children.
  • DO NOT look directly into the beam of light.
  • DO NOT use the lamp near a naked flame.
  • DO NOT disassemble, repair or alter the gauge.
  • DO NOT operate the gauge with wet hands.

Introduction:
Thank you for purchasing a Sealey product. This 2-in-1 Pen Light & Tyre Pressure Gauge is designed to provide accurate pressure readings and illumination. Please read the instructions carefully for safe and efficient use.

Operation:

  • Charging the Gauge:
    Connect the USB cable to the USB input on the side of the light. Plug the USB cable into a suitable 5V 1A outlet or mains adapter (not included). Ensure the light is turned off while charging.

  • Operating the Light:
    Press the TORCH button to cycle between the torch and the main light.

  • Measuring Tyre Pressure:

  • Press the PRESSURE button to turn on the unit.

    • Cycle between pressure units by pressing the PRESSURE button.
    • Align the gauge with the valve of the tyre and press it tightly for 3 seconds to display the pressure.
    • To turn off, hold the PRESSURE button or wait for automatic shutdown after 30 seconds.

Maintenance:

  • DO NOT leave the battery without charge for an extended period to prevent deep discharge.
  • The light source is not replaceable; replace the product when the light source reaches its end of life.

FAQ

  • How do I dispose of this product?
    Dispose of this product at the end of its working life following EU Directive on Waste Electrical and Electronic Equipment (WEEE). Contact your local solid waste authority for recycling information.

  • What should I do with the battery?
    Under Waste Batteries and Accumulators Regulations 2009, ensure proper disposal. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

  • How can I protect the environment when disposing of this product?
    Recycle unwanted materials, drain fluids into approved containers, and dispose of following local regulations to protect the environment.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

  • Keep the gauge out of reach from children.
  • DO NOT look directly into the beam of light, as this will result in dazzling.
  • DO NOT use the lamp near a naked flame
  • DO NOT disassemble, repair or alter the gauge.
  • DO NOT operate the gauge with wet hands.

PRODUCT OVERVIEW

SEALEY-TSTPL01-2-IN-1-Pen-Light-and-Tyre-Pressure-Gauge-
fig-2

INTRODUCTION

Digital tyre pressure gauge displayed in bar, psi, kPa and kg/cm². Bright LCD backlit display, ideal for reading the screen in low light conditions. Main side light COB LED 2W 180 lumens (worklight)/90 lumens (low light). Top Light SMD LED, 1W 80 lumens. 3.7V Rechargeable 500mAh Lithium-ion battery with a USB Type-C charging cable. Base and side magnets for easy hands-free use. It can be easily stored in a glove box.

SPECIFICATION

Model No: TSTPL01
Pressure Units: Bar, psi, kPa, kg/cm²
Range: 0.21-10.3bar(3-150psi, 0.21-10.5kg/cm², 21-1034kPa)
Resolution: 0.5psi
Battery Type 3.7V 500mAh
Input (USB Type-C) 5V (dc) 1A
Charge Time 1hr
Work light Source 2W COB LED
Work light Brightness Work light 180 lumens/low light 90 lumens
Work light Runtime 2hrs main work light
Torch Source 1W SMD
Torch Brightness 80 lumens
Product Dimensions (L x D x W) 170mm x 22mm x 30mm
USB Type C Cable Length 400mm

OPERATION

  1. CHARGING THE GAUGE

  2. Connect the USB cable to the USB INPUT on the side of the light.

  3. Plug the USB cable into a suitable 5V 1A outlet or mains adapter (not included).
    NOTE: ensure the light is turned OFF whilst charging.

  4. OPERATING THE LIGHT
    Press the TORCH button to cycle between the torch and the main light.

  5. MEASURING TYRE PRESSURE

  6. Press the PRESSURE button to turn on the unit.

  7. Press the PRESSURE button to cycle between the following units: PSI, BAR, KPA, Kg/cm2.

  8. Align the tyre pressure gauge with the valve of the tyre and press it tightly for 3 seconds. The correct pressure will display.
    Hold the PRESSURE button to turn the unit off, or wait 30 seconds for the unit to turn off automatically.

MAINTENANCE

  • DO NOT leave the battery without charge for an extended period – deep discharge risks damaging the battery
  • The light source is not replaceable; when the light source reaches its end of life the whole product shall be replaced.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

BATTERY REMOVAL

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

ABOUT COMPANY

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SEALEY User Manuals

Related Manuals