TCL CAMB1 Wireless Home Security Camera User Manual
- August 19, 2024
- TCL
Table of Contents
TCL CAMB1 Wireless Home Security Camera
Product Information
Specifications:
- Dimensions : 90(L) x 130(W)mm
- Weight : 128g
- Model : TCL CAM B1
- Power Source : Battery/Solar Energy
- Charging Port : Type-C
- Wireless Connectivity : Wi-Fi
- Compatible with : iOS and Android devices
Product Overview
The wireless home security camera by TCL, model CAM B1, is a versatile device
designed for easy installation and monitoring of your surroundings. The camera
features various components including a lens, microphone, motion sensor,
light, speaker, charging port, TF card slot, power ON/OFF button, reset
button, solar energy panel, and battery cover.
Setting Up the System:
- Ensure the battery is fully charged before use.
- Download the “arpha” app from the App Store or Google Play store.
- Register an account on the app.
- Connect your smartphone to the wireless router (2.4GHz channel for dual-band routers).
- Launch the TCL app, add the device, select Camera & Lock, and follow the on-screen instructions.
- Connect the camera to your Wi-Fi network and wait for the indicator light to turn steady green.
Mounting the Camera:
The camera should be mounted 7-10 ft above the ground for optimal motion
sensor performance. Avoid direct sunlight exposure for accurate detection.
Charging the Camera:
Use a 5V USB charger to charge the TCL camera. It is recommended to charge it
in a location within 7-10 ft above the ground to maximize motion sensor
performance.
Disclaimer:
The product specifications, size, and shape may change without prior notice.
The manufacturer reserves the right to update the manual without notification.
GETTING STARTED
What’s Included
Camera quantity and accessories vary by bundle package.
Disassembling and assembling the battery
- Rotate the knob 90 degrees in the direction of the arrow.
- Open the battery cover as this direction below
- Insert the battery into the camera and close the battery cover
PRODUCT OVERVIEW
Diagram
- Lens
- Status LED
- Motion sensor
- Microphone
- Light
- Mounting hole
- Solar energy
- Reset button
- Charging port
- Power ON/OFF
- TF card slot
- Speaker
- Battery cover
- knob
Status and Indicator
Device Status
|
Button
|
Indicator Light
|
Voice
---|---|---|---
Power On
| Long press the power button for 2 seconds| Red light slow blinking| Sound of camera start
Power Off
| Long press the power button for 5 seconds| Lights All Off| Sound of camera shutdown
Reset
| Long press the Reset button for 5 seconds| Red light slow blinking| Restore factory settings
Upgrade
| /| Orange light slow blinking| The system is being upgraded, please wait a
moment
Connect the WiFi successful| /| Green light stays on| Connect the WiFi
successful
Connect the WiFi failed| /| Red light slow blinking| Connect the WiFi failed
Battery Charging|
/
| Red light stays on|
/
Battery Charged|
/
| Lights All Off|
/
SETTING UP THE SYSTEM
Download the App and Set up the System
-
Please fully charge the battery before using it for the first time.
-
Download the arpha app from the App Store ( iOS devices ) or Google Play store (Android devices).
-
Register an account if this is the first using the App.
-
Make sure that your smartphone is connected to your wireless router ( It has to be on the 2.4GHz channel if you have a dual-band router )
Note : The IOT service is provided by the third-party company of Tuya.
Please refer to the privacy policy of Tuya for data processing -
Launch the TCL app, click “Add Device” , then select “ Camera & Lock”, and follow the screenshot below.
-
Make sure the Red indicator on the device is blinking, then press “Next Step”. (If the operation failed, press the reset button for over 5 seconds)
-
Enter your“Wi-Fi network and password” click,“Next”.
-
When the indicator light on the device turns from ashing red light to steady green light, the network configuration is complete.
MOUNTING THE CAMERA
Mount the camera
- Firmly secure the base onto the wall using screws(depends onactual wall mount) supplied in the package. “Keep the installation angle of solar panels about 30~45°with the horizontal plane as shown in the picture below. Take care to install the solar panel in camera so that the sun is not blocked by any items such as eaves,trees branches,etc.
- It is suggested to install arphacam 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor ofarphacam. Avoid placing arphacam under direct sunlight.
CHARGE TCL CAMERA
DISCLAIMER
The contents in this manual, product specifications, size, and shape are
subject to change without prior notice. The manufacturer makes no
representations or warranties concerning the contents hereof and reserves the
right to revise this manual without obligation to notify any person. The
manufacturer shall not be liable for any technical or editorial errors or
omissions contained in this manual, or for any damage, direct or indirect,
from discrepancies between the manual and the product it describes. The
manufacturer assumes no responsibility, directly or indirectly, for financial
losses or claims from third persons resulting from the use of this product and
any of its functions. The total accessible capacity varies depending on the
operating environment. All references to speed are for comparison purposes
only. Actual data throughput may vary.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FAQ
Q: How do I reset the camera?
A: Long press the reset button for 5 seconds to reset the camera to
factory settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>