VIPER 7147VSEC/7147X Transmitter User Manual
- August 19, 2024
- VIPER
Table of Contents
VIPER 7147VSEC/7147X Transmitter
Product Specifications
- Transmitter Model: 7147VSEC/7147X
- Technology: AM 1-Way
- Max Range: 100M
- LED: Status indication
- Battery: CR2032
- Button:
- 4-button Feature Transmit LED
- Description Active when transmitting information
- Activates Arm and Panic Off.
- Activates Disarm and Panic Off.
- Activates Auxiliary Output 1 and Silent ModeTM.
- Activates Panic On/Off.
- Activates Auxiliary Output 2.
PRODUCT OVERVIEW
Product Usage Instructions
Battery Installation
To install the battery, locate the battery compartment on the transmitter and
carefully insert the CR2032 battery following the correct polarity. Ensure the
battery is securely in place before closing the compartment.
Button Functions
The transmitter features four buttons with different functions:
- Button 1: Activates Arm and Panic Off.
- Button 2: Activates Disarm and Panic Off.
- Button 3: Activates Auxiliary Output 1 and Silent ModeTM.
- Button 4: Activates Panic On/Off and Auxiliary Output 2.
Range Considerations
The maximum range of the transmitter is 100 meters. Ensure you are within this
range for optimal performance when using the device.
FCC Statement
This device complies with FCC Rules part 15. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference that may be received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the user’s authority to use the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQ
Q: How do I know when the battery needs to be replaced?
A: The LED status indication will typically show a low battery warning when
the battery needs replacement. It’s recommended to replace the battery
promptly to avoid any disruptions in usage.
Q: Can I use this transmitter with other devices?
A: The transmitter is designed to work specifically with compatible systems.
Using it with other devices may not yield proper functionality or results.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>