CrewPlex DR10-900 Wireless Communication System for Crews User Guide

CrewPlex DR10-900 Wireless Communication System for Crews

IN THIS BOX

WHAT’S INCLUDED WITH DR10-900?

• BeltPack
• Li-Ion Battery (Installed during shipment)
• USB Charging Cable
• BeltPack Antenna (Attach to beltpack prior to operation.)
• Quick Start Guide
•  Product Registration Card

ACCESSORIES

OPTIONAL ACCESSORIES

• CAC-USB5-CHG: CrewPlex 5-Port USB Charger
• CAC-CPDR-5CASE: IP-67-rated Hard Travel Case
• CAC-CP-SFTCASE: CrewPlex Soft Travel Case
• CPBT-DRC-55: CrewPlex Drop-In Charger for 5 DR10 BeltPacks and 5 Rechargeable Li-Ion Batteries
• Selection of compatible headsets (see DR10 Manual for more details)

PARTS

SETUP

1. Attach the beltpack antenna. It is reverse threaded; screw counter-clockwise.
2. Connect a headset to the beltpack.
3. Power on. Press and hold the Power button for 2 seconds, until the screen turns on.
4. Access the menu. Press and hold the Mode button for 3 seconds, until the screen changes to . Short-press Mode to scroll through the settings, and then scroll through setting options using Volume +/−. Press and hold Mode to save your selections and exit the menu.
   a. Select a Group. Select a group number from 00–51.
   IMPORTANT: Beltpacks must have the same group number to communicate.
   b. Select an ID. Select a unique ID number.
   • Repeater* Mode ID options: M, 01–08, S, or L.
   • Roam Mode ID options: M, SM, 02–09, S, or L.
   • Standard Mode ID options: M, 01–09, S, or L.
   • One beltpack must always use the “M” ID and serve as the master beltpack for proper system function. An “M” indicator designates the master beltpack on its OLED. (For Roam Mode, one beltpack must use the “SM” ID as well.)
   • listen-only beltpacks must use the “L” ID. You may duplicate ID “L” on multiple beltpacks.
   • Shared beltpacks must use the “S” ID. You may duplicate ID “S” on multiple beltpacks, but only one shared beltpack may talk at a time.
   • When using “S” IDs, the last full-duplex ID cannot be used (“08” in Repeater mode and “09” in the Standard or Roam).
   c. Confirm beltpack’s Security Code. All beltpacks must use the same security code to work together as a system.

• Repeater mode is the default setting. See the DR10-900 Manual for information about modes.

OPERATION

•  LED Modes – Blue (double blink) when logged in. Blue (single blink) when logged out. Red when battery charging in progress. (LED turns off when charging is complete.)

•  Lock – To toggle between Lock and Unlock, press and hold the Talk and Mode buttons simultaneously for 3 seconds. A lock icon appears on the OLED when locked.

•  Volume Up and Down – Use the + and − buttons to control the headset volume. “Volume” and a stair-step indicator display the beltpack’s current volume setting on the OLED. You will hear a beep in your connected headset volume is changed. You will hear a different, higher-pitched beep when maximum volume is reached.

•  Talk – Use the Talk button to enable or disable talk for the device. “TALK” appears on the OLED when enabled.
  » Latch talking: A single, short press of the button.
  » Momentary talking: Press and hold the button for 2 seconds or longer; talk will remain on until the button is released.
  » Shared users (“S” ID) utilize momentary talking. Only one Shared user can talk at a time.

•  Mode – Short-press the Mode button to toggle between the channels enabled on the beltpack. Long-press the Mode button to access the menu.

•  Two-Way Push-to-Talk – If you have a two-way radio connected to the master pack, you may use this button to activate Talk for the two-way radio from any pack on the system. See the DR10-900 Manual for more information about connecting a two-way radio.

Multiple DR10 Systems
Each separate DR10 system should use the same Group and Security Code for all beltpacks in that system. CrewPlex recommends that systems operating in proximity to one another set their Groups to be at least ten (10) values apart. For example, if one system is using Group 03, another system nearby should use Group 13.

Battery

• Battery life: Approx. 12 hours
• Charge time from empty: Approx. 3.5 hours (USB port connection) or approx. 6.5 hours (drop-in charger)
•  Charging LED on beltpack will illuminate red while charging and will turn off when charging complete.
•  Beltpack may be used while charging, but doing so may lengthen charge time.

Menu Options

Aside from Group and User ID, the following settings are adjustable from the beltpack menu.

Side Tone

|

2

|

Off, 1–5

Mic Gain| 1| 1–8
Channel A| On| On, Off
Channel B*| On| On, Off
Security Code| 0000| Alpha-numeric

*Channel B not available in Roam Mode.

Recommended Settings by Headset Recommended Setting

Headset T ype

| R ec ommended Setting
---|---
Mic G ain
SmartBoom LITE and PRO| 1
CrewPlex Hard Hat Headset| 6
CrewPlex Hard Had LITE Headset| 4
CrewPlex In-Ear Headset| 7

CUSTOMER SUPPORT
CrewPlex offers technical support via phone and email from 07:00 to 19:00 Central Time (UTC−06:00), Monday through Friday.
+1.334.321.1400
customer.support@crewplex.com
Visit www.crewplex.com for product support references and helpful documentation.

Additional Documentation This is a quick start guide. For additional information, visit our support website. (Scan this QR code with your mobile device to navigate there quickly.)

COPYRIGHT © 2021 CrewPlex, LLC. All rights reserved. CrewPlex™ is a trademark of CoachComm, LLC. Any and all other trademark references within this document are property of their respective owners.
Document Reference: D0000590_B

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>