BOSCH SPV4EMX21G Fully Integrated Dishwasher Instruction Manual

August 18, 2024
Bosch

BOSCH SPV4EMX21G Fully Integrated Dishwasher

INSTRUCTION MANUAL

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here.
A table of country-specific units can be found in the instruction manual.

Hardness range mmol/l Setting value
Soft 0 – 1.1 H00
Soft 1.2 – 1.4 H01
Medium 1.5 – 1.8 H02
Medium 1.9 – 2.1 H03
Medium 2.2 – 2.9 H04
Hard 3.0 – 3.7 H05
Hard 3.8 – 5.4 H06
Hard 5.5 – 8.9 H07

Setting the water softening system

1. Press ⁠ .
2. To open the basic settings, press SETUP 3 SEC for 3 seconds.

  • The display shows Hxx.
  • The display shows ⁠SET.

3. Press repeatedly until the right water hardness has been set.
4. To save the settings, press SETUP 3 SEC for 3 seconds.

Adding special salt

To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.

3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.

4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid (1)and (2) lift ⁠.

2. Add rinse aid up to the max mark.

3. Close the lid of the dispenser for rinse aid.

  • The lid clicks into position

Adding detergent

1. Add the detergent to the dry detergent dispenser

2. Close the lid of the detergent dispenser.

  • The lid clicks into position

Programmes

The programme data has been measured in the laboratory according to European standard EN 60436.
The consumption figures depend on the programme and additional function selected.

The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

Troubleshooting

Specifications

Model: Dishwasher

Connectivity: Home Connect App

Water Hardness Settings: Soft, Medium, Hard


FAQ

Q: How do I cancel a program?

A: Press and hold the cancel button for approximately 4 seconds.
The program will be cancelled within a minute.

Q: Can I use regular salt instead of special salt?

A: No, only use special salt to avoid damage to the appliance.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals