Segotep GM750 750W GOLD POWER SUPPLY USER MANUAL

: August 17, 2024
: Segotep

Table of Contents

Segotep GM750 750W GOLD POWER SUPPLY
Introduction
Specifications
Package Includes
Features
Installation
Troubleshooting
750W/850W/1250W/1500W/2000W/750W SFx connectors
FAQs
Video- Segotep GM750 750W GOLD POWER SUPPLY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Segotep GM750 750W GOLD POWER SUPPLY

Launch Date: February 7, 2021
Price: $99.99

Introduction

Introduction: premium power
Radiance of gold power and efficiency, the Segotep GF/GM Power Supply joins the elite ranks of 80 Plus Gold power supplies. Built upon the best features of our Gold-rated units and elevated to the next level. 80 Plus Gold certification with up to 90% efficient or higher. A fully modular design allows cables to be removed from the power supply for ease of installation and removal. The Segotep GF/GM power supply comes with a full suite of protection (OCP, OVP, OPP, SCP, OPT) for safety and security.

With the Segotep GM750 750W Gold Power Supply, you can build a PC that works reliably and efficiently. With an 80 PLUS Gold rating, this power source guarantees up to 90% energy efficiency, which means it uses less power and makes less heat. Its fully modular design lets you set it up in a clean, organized way, which makes it easier to keep track of wires and improve airflow in your system. Voltage safety (UVP), Short Circuit Protection (SCP), Over Current Protection (OCP), and Over Temperature Protection (OTP) are just a few of the strong safety features built into the GM750. These features keep your components safe from electrical hazards. This power source works with many different PCs because it supports the most recent PCIe 5.0 and ATX standards. This makes it a good choice for professionals, gamers, and people who make content. With a strong 120mm cooling fan, it stays at the right temperature even when it’s under a lot of stress, so it will work well for a long time. You can be sure that the Segotep GM750 will power your system reliably and efficiently whether you’re making a new PC or upgrading an old one.

Specifications

Model Name: GM750
Brand: Segotep
Compatible Devices: Personal Computer
Connector Type: PCIe 5.0, ATX
Output Wattage: 750W
Form Factor: ATX12V, ATX
Wattage: 750 watts
Cooling Method: Air
Item Dimensions (L x W x H): 5.91 x 5.51 x 3.35 inches
Power Supply Design: Full Modular
Item Weight: 5.52 pounds
Manufacturer: Segotep

Package Includes

Segotep GM750 750W Gold Power Supply
Modular cables
Power cord
User manual
Cable ties
Mounting screws

Features

STABLE POWER
The GF/GM series has outstanding electrical performance with ultra-stable voltage and extremely clean power output. This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable power to all components. The GF/GM series also has high efficiency up to 90% (115VAC)/ 92% (20-240VAC) efficiency and is 80 PLUS GOLD certified.
TOP QUALITY PROTECTIONS
The GF/GM series comes with the most comprehensive protection set possible, including Over Voltage Protection (OVP),
Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Current Protection (OCP), and Temperature Protection (OTP).
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall, and provide a clean look to any system.
Modular PSU designs allow the user to disconnect the cables from the power supply side if they are not needed for the specific configuration. This can help free up space inside the case and improve cable management as well as airflow throughout the system
80 PLUS Gold Certified:
The Segotep GM750 750W Gold Power Supply is 80 PLUS Gold certified, which means it offers high efficiency, leading to lower energy consumption and better overall system performance.
PCIe 5.0 Ready:
The Segotep GM750 750W comes equipped with an original 12VHPWR cable, capable of delivering up to 600W of power to PCIe 5.0 graphics cards. This ensures stable and safe power output, meeting the demands of the latest GPUs.
Graphics Card Support for All:
This power supply is compatible with NVIDIA RTX 20/30/40 Series and AMD graphics cards. The 10 ports provide versatile connection options, accommodating various GPU designs.
100% Japanese Original Electrolytic Capacitors:
The Segotep GM750 uses high-quality Japanese electrolytic capacitors, enhancing the durability and reliability of the power supply. These components contribute to the stability and long lifespan of the GM750.
Full Modular Flat Cables:
The fully modular design of the Segotep GM750 allows users to select only the cables they need, reducing clutter and improving airflow within the chassis. The low-profile black cables also make cable management easier.
ATX 3.0 Compatible:
The Segotep GM750 is compliant with PCIe 5.0 and Intel Power Supply Design Guide (PSDG) ATX 3.0 standards. It can handle up to 2x total power excursion and 3x GPU power excursion, making it highly adaptable for modern systems.
120mm Hydraulic Bearing Fan:
The Segotep GM750 is equipped with a 120mm hydraulic bearing fan paired with AL Cooler intelligent temperature control. This fan operates at a noise level of ≤29.98dB(A), minimizing noise interference while keeping the power supply cool.
Built-In Industrial Grade Protection:
The Segotep GM750 features adaptive global voltage and provides stable, clean power with exceptional voltage stability. Whether at home or while traveling, the power supply’s industrial-grade protection ensures safety against short circuits and other electrical issues.

Installation

Remove the power supply from its packaging.
(Optional) Using the provided PSU testing tool, connect the 24-pin cable to the PSU, then attach the testing tool to the 24-pin cable. Connect the AT power cable to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan to use. Once connected, turn the power switch to the ON position. (If the ECO mode is set to on, the fan will not spin)
Please note: If you are using a water-cooling configuration, this testing tool provides a simple, safe, option for bleeding/draining/testing water- cooling components without the need of a paperclip or other device.
Use the screws provided with your case to install the power supply into your computer.
NOTE: It is recommended to install the power supply with the fan facing down. However, if your case places the power supply at the bottom of the case and there are no ventilation holes available, it may be best to install the power supply with the fan facing up for greater efficiency and reliability.
Connect the 24-pin ATX cable to the PSU and the motherboard.
Connect the 4+4-Pin EPS12V cable to the motherboard. (Optional) – If you plan on extreme overclocking and your motherboard supports additional 8-pin or 4-pin CPU power connectors, connect the second 4+4-pin EPS12V cable. This is only needed for heavy overclocking or for Dual CPU motherboards.
Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE: Do not attempt to plug an 8-pin PCI-E cable into a 6-pin connector without first detaching the two extra pins.
Connect SATA power cables to all data drives or optical drives (hard drives, solid state drives, optical drives).
Connect the peripheral “Molex” 4-Pin connectors for fans, pumps, legacy components, and other devices/adapters.
Connect the AC power cord to your power supply and to the wall. Check all connections to ensure a solid connection and turn the power switch on the power supply to the ON position.

Troubleshooting

I see there are more than four screw holes on the back of the power supply, but the packaging only offers (4) screws, are some missing?
Nothing is missing; you will only need to attach the Segotep GP power supply to the case with four screws. The power supply offers more than (4) holes to provide optimal compatibility for today’s varied case designs.
My Segotep Power Supply includes (2) EPS cables for my motherboard, do I need to connect up both?
Motherboards only require (1) 4+4 or 8-Pin EPS connection. On some models, an additional 4+4-Pin or 8-Pinconnection on the motherboard may be found for dual CPU configurations or for extreme overclocking If your motherboard supports dual 4+4-Pin EPS connections, please refer to your motherboard manufacturer’s manual for details on the proper function and power of the EPS connections.
What if I want to use power adapters for my graphics card(s)motherboard/peripherals?
Segotep always recommends the use of direct power connections from the power supply to power all components.
Does it matter which end of the cable I plug into the power supply?
Yes, the connections going to the power supply will not have “breakdowns” like the EPS (CPU) has 4+4 on one side and full 8-Pin on the other. Check each cable as it is labeled appropriately to match the power supply side, and connect only the same “matching” cable directly to the power supply as referenced on each connector.

750W/850W/1250W/1500W/2000W/750W SFx connectors

7SDW GOLD FULL MODULAR BSDW GOLD FULL MODULAR

| Cable Type| Connector Per Cable| Cable Qty
---|---|---|---
MB| ATX 24-Pin x 1|
CPU| EPS/ATX12V 8(4+4)-Pin x 1| 2
VGA| PCI-E 8(6+2)-Pin x 2| 2
SATA| SATA5-Pin x 4| 2
PERIF| Molex 4-Pin x 3| 2
FDD| Molex to FDD Adapter x 1|

12SDW GOLD FULL MODULAR

16DDW GOLD FULL MODULAR

2DDDW GOLD FULL MODULAR

| Cable Type| Connector Per Cable| Cable Qty
---|---|---|---
MB| ATX 24-Pin x 1|
CPU| EPS/ATX12V 8(4+4)-Pin x 1| 2

VGA

7SDW SFX GOLD FULL MODULAR

| Cable Type| Connector Per Cable| Cable Qty
---|---|---|---
MB| ATX 24-Pin x 1|
CPU| EPS/ATX12V 8(4+4)-Pin x 1|
VGA| PCI-E 8(6+2)-Pin x 2| 2
SATA| SATA5-Pin x 4|
PERIF| Molex 4-Pin x 3|

750W/850W/1250W/750W 5Fx Specification

S e g o t e p	7SDW GOLD FULL MODULAR	I
AC INPUT	100-240Vac, 12-6A, 47-63Hz

DC OUTPUT

| +12V| +5V| +3.3V| -12V| +5Vsb
62A| 15A| 16A| 0.3A| 2.5A
744W| 103W| 3.6W| 12.5W
Rate Power: 750W
S e g o t e p| BSDW GOLD FULL MODULAR| I
---|---|---
AC INPUT| 100-240Vac, 12-6A, 47-63Hz

DC OUTPUT

| +12V| +5V| +3.3V| -12V| +5Vsb
70A| 15A| 16A| 0.3A| 2.5A
840W| 103W| 3.6W| 12.5W
Rate Power:8 50W
Segotep| 125DW GOLD FULL MODULAR| I
---|---|---
AC INPUT| 100-240Vac, 12-6A, 47-63Hz

DC OUTPUT

| +12V| +5V| +3.3V| -12V| +5Vsb
104A| 15A| 16A| 0.3A| 2.5A
1248W| 103W| 3.6W| 12.5W
Rate Power: 1250W
Segotep| 7SDW SFX GOLD FULL MODULAR| I
---|---|---
AC INPUT| 100-240Vac, 12-6A, 47-63Hz

DC OUTPUT

| +12V| +5V| +3.3V| -12V| +5Vsb
62A| 15A| 16A| 0.3A| 2.5A
744W| 103W| 3.6W| 12.5W
Rate Power: 750W

FAQs

What makes the Segotep GM750 750W Gold Power Supply energy efficient?

The Segotep GM750 750W Gold Power Supply is energy efficient due to its 80 PLUS Gold certification, which ensures up to 90% efficiency, reducing energy consumption and heat output.

What protection features does the Segotep GM750 750W Gold Power Supply offer?

The Segotep GM750 750W Gold Power Supply offers several protection features, including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Short Circuit Protection (SCP), Over Current Protection (OCP), and Over Temperature Protection (OTP).

What cooling method is used in the Segotep GM750 750W Gold Power Supply?

The Segotep GM750 750W Gold Power Supply uses a 120mm silent cooling fan that adjusts its speed based on the system's load to maintain optimal temperatures.

How does the Segotep GM750 750W Gold Power Supply ensure stable power delivery?

The Segotep GM750 750W Gold Power Supply ensures stable power delivery through its high-quality components and design, which are engineered to provide consistent power under various loads.

What connectors are available with the Segotep GM750 750W Gold Power Supply?

The Segotep GM750 750W Gold Power Supply comes with PCIe 5.0 and ATX connectors, as well as multiple SATA and Molex connectors for versatile compatibility with PC components.

What is the form factor of the Segotep GM750 750W Gold Power Supply?

The Segotep GM750 750W Gold Power Supply has an ATX12V and ATX form factor, making it suitable for most standard PC cases.

How does the Segotep GM750 750W Gold Power Supply contribute to system cleanliness?

The full modular design of the Segotep GM750 750W Gold Power Supply helps maintain system cleanliness by allowing users to only use the necessary cables, reducing clutter inside the case.

What is the weight of the Segotep GM750 750W Gold Power Supply?

The Segotep GM750 750W Gold Power Supply weighs approximately 5.52 pounds.

How do I install the Segotep GM750 750W Gold Power Supply?

To install the Segotep GM750 750W Gold Power Supply, mount it in your PC case using the provided screws, connect the necessary modular cables to your components, and plug in the power cord.

What are the dimensions of the Segotep GM750 750W Gold Power Supply?

The Segotep GM750 750W Gold Power Supply has dimensions of 5.91 x 5.51 x 3.35 inches, fitting standard ATX cases.

What makes the Segotep GM750 750W Gold Power Supply suitable for overclocking?

The Segotep GM750 750W Gold Power Supply is suitable for overclocking due to its stable power delivery and robust protection features, ensuring reliable performance under higher demands.