Segotep GM850 Power Supply User Manual

: June 15, 2024
: Segotep

Segotep GM850 Power Supply User Manual

Introduction

Premium Power Radiance of gold power and efficiency, the Segoe GF/GM Power Supply joins the elite ranks of 80 Plus Gold power supplies. Built upon the best features of our Gold rated units and elevated to the next level. 80 Plus Gold certification with up to 90% efficient or higher. A full modular design allows cables to be removed from the power supply for ease of installation and removal. The Segoe GF/GM power supply comes with a full suite of protection (OCP, OVP, OPP, SCP, OPT) for safety and security.

Features

STABLE POWER
The GF/GM series has outstanding electrical performance with ultra stable voltage and extremely clean power output. This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable power to all components. The GF/GM series also has high efficiency up to 90% (115VAC)/ 92% (20-240VAC) efficiency and is 80 PLUS GOLD certified.

TOP QUALITY PROTECTIONS
The GF/GM series comes with the most comprehensive protection set possible, including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP), Over Current Protection (OCP), and Over Temperature Protection (OTP).

MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to any system. Modular PSU designs allow the user to disconnect the cables from the power supply side if they are not needed for the specific configuration. This can help free up space inside the case and improve cable management as well as airflow throughout the system.

Installation

Remove the power supply from its packaging.
(Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power cable to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan to use. Once connected, turn the power switch to the ON position. (If the ECO mode is set to ON, the fan will not spin)
Please note: If you are using a water cooling configuration, this testing tool provides a simple, safe, option for bleeding/draining/testing water cooling components without the need of a paperclip or other device.
Use the screws provided with your case to install the power supply into your computer.
NOTE: It is recommended to install the power supply with the fan facing down. However, if your case places the power supply at the bottom of the case and there are no ventilation holes available, it may be best to in stal the power supply with the fan facing up for greater efficiency and reliability.
Connect the 24-Pin ATX cable to the PSU and the motherboard.
Connect the 4+4-Pin EPS12V cable to the motherboard. (Optional) – If you plan on extreme overclocking and your motherboard supports additional 8-Pin or 4-Pin CPU power connectors, connect the second 4+4-Pin EPS12V cable. This is only needed for heavy overclocking or for Dual CPU motherboards.
Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin connector without first detaching the two extra pins.
Connect SATA power cables to all data drives or optical drives (hard drives, solid state drives, optical drives).
Connect the peripheral “Molex” 4-Pin connectors for fans, pumps, legacy components and other devices/adapters.
Connect the AC power cord to your power supply and to the wall. Check all connections to assure a solid connection and turn the power switch on the power supply to the ON position.

Q:Isee there are more than four screw holes on the back of the power

supply, but the packaging only offer (4) screws, are some missing?

A: Nothing is missing; you will only need to attach the Segotep GP power supply to the case with four screws. The power supply offer more than (4) holes to provide optimal compatibility for today's varied case designs.

Q: My Segotep Power Supply includes (2) EPS cables for my motherboard, do I

need to connect up both?

A: Motherboards only require (1) 4+4 or 8-Pin EPS connection. On some models, an additional 4+4-Pin or 8-Pinconnection on the motherboard may be found for dual CPU configurations or for extreme overclocking .If your motherboard supports dual 4+4-Pin EPS. connections, please refer to your motherboard manufacturer's manual for details on the proper function and power of the EPS connections.

Q. What if I want to use power adapters for my graphics

card(s)motherboard/peripherals?

A. Segotep always recommends the use of direct power connections from the power supply to power all components.

Q. Does it matter which end of the cable I plug into the power supply?

750W/850W/1250W/1600W/2000W/750W SFX connectors

750W GOLD FULL MODULAR 850W GOLD FULL MODULAR| Cable Type| Connector Per Cable| Cable Qty
---|---|---|---
MB| ATX 24-Pin x 1| 1
CPU| EPS/ATX12V 8(4+4)-Pin x 1| 2
| |
VGA| PCI-E 8(6+2)-Pin x 2| 2
SATA| SATA 5-Pin x 4| 2
PERM| Molex 4-Pin x 3| 2
FDD| Molex to FDD Adapter x 1| 1
1250W GOLD FULL MODULAR 1600W GOLD FULL MODULAR 2000W GOLD FULL MODULAR| Cable Type| Connector Per Cable| Cable Qty
---|---|---|---
MB| ATX 24-Pin x 1| 1
CPU| EPS/ATX12V 8(4+4)-Pin x 1| 2
VGA| PCI-E 8(6+2)-Pin x 2| 2
PCI-E 8(6+2)-Pin| 4
SATA| SATA 5-Pin x 4| 3
PERIF| Molex 4-Pin x 3| 2
FDD| Molex to FDD Adapter x 1| 1
7SOW SFXGOLD FULL MODULAR| Cable Type| Connector Per Cable| Cable OW
---|---|---|---
MB| ATX 24-Pin x 1| 1
CPU| EPS/ATX12V 8(4+4)-Pin x 1| 1
VGA| PCI-E 8(6+2)-Pin x 2| 2
SATA| SATA5-Pin x 4| 1
PERIF| Molex 4-Pin x 3| 1

SegotepⓇ
750W/850W/1250W/750W SFX Specification

Segotep®| 75OW GOLD FULL MODULAR| |
---|---|---|---
| 8 0 PL| |
AC INPUT| 100-240Vac, 12-6A, 47-63Hz
GO D
|
DC OUTPUT| +12V| +5V| +3.3V| -12V| +5Vsb|
62A| 15A| 16A| 0.3A| 2.5A|
744W| 103W| 3.6W| 12.5W|
Rate Power:750W
Segotep®| 75OW SFX SOLO FULL MODULAR
---|---
AC INPUT| 100-240Vac, 12-6A, 47-63Hz
DC OUTPUT| +12V| +5V| +3.3V| -12V
62A| 15A| 16A| 0.3A
744W| 103W| 3.6W
Segotep®| 1260W GOLD FULL MODULAR
---|---
AC INPUT| 100-240Vac, 12-6A, 47-63Hz
DC OUTPUT| +12V| +5V| +3.3V| -12V
104A| 15A| 16A| 0.3A
1248W| 103W| 3.6W