PHILIPS BDP102 LED60 LED Pole Light Owner’s Manual

: August 19, 2024
: Philips

Table of Contents

PHILIPS BDP102 LED60 LED Pole Light
Specifications
Product Usage Instructions
FAQs
PRODUCT INFORMATION
Product data
TownGuide Performer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS BDP102 LED60 LED Pole Light

Specifications

Lighting: TownGuide Performer
Model: BDP102 LED60/830 II DW PCF SI LS-8 62P
Lamp Family Code: LED60
Light Source Replaceable: Yes
Luminous Flux: 6000 lm
Distribution: Wide
Cover Material: Polycarbonate bowl/cover frosted
Dimming: LumiStep dimming 8 hours
Input Voltage: 220-240 V
Power Consumption: 47 W
Power Factor: 0.96
Dimmable: Yes
Housing Material: Aluminum
Reflector Material: Acrylate
Optic Material: Polycarbonate

Product Usage Instructions

Installation
- Ensure the power supply is switched off before installation.
- Mount the lighting fixture securely using the provided mounting device.
- Connect the fixture to the power source using the screw connection block.
Dimming
- To dim the light output, ensure you have a compatible dimmable driver/power unit/transformer. Follow the manufacturer’s instructions for dimming the control interface.
Maintenance
- Regularly clean the optical cover and check for any visible damage. If any part needs replacement, refer to the user manual for instructions on serviceable parts.

FAQs

Is the LED module replaceable?
- Yes, the LED module in this product is replaceable. Refer to the user manual for detailed instructions on replacing the LED module.
Can this lighting fixture withstand outdoor conditions?
- Yes, this fixture is suitable for outdoor use. The optic type is specified for outdoor applications, ensuring durability and performance in various weather conditions.
How do I control the dimming feature?
- The dimming feature can be controlled using a compatible dimmable driver or power unit. Ensure proper installation and setup of the dimming components according to the provided guidelines.

PRODUCT INFORMATION

TOWN GUIDE PERF CLASSIC CONE, LED module 6000 lm, Distribution wide, Polycarbonate bowl/cover frosted, LumiStep dimming 8 hours

The TownGuide Performer family consists of six recognizable, yet modern shapes:

Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR), or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl).
With an extensive range of lumen packages, neutral white or warm white LED light sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project.
All this is combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energyreduction programs.
This includes LumiStep, DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy.
Thanks to the bayonet whistle connector with an integrated gland located in the spigot, there’s no need to open the luminaire for installation.
The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible.
And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.

Product data

General Information
- Lamp family code LED60 [LED module 6000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Photocell –

TownGuide Performer

Light source engine type LED
Service tag Yes
Product family code BDP102 [TOWNGUIDE PERF CLASSIC CONE]
Lighting Technology LED
Value ladder Performance
Embedded control LumiStep dimming 8 hours
Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover, and mechanical parts

Light Technical

Upward light output ratio 10
Luminous Flux 3,300 lm
Standard tilt angle post top 0°
Standard tilt angle side entry –
Luminous Efficacy (rated) (Nom) 70 lm/W
Correlated Color Temperature (Nom) 3000 K
Color rendering index (CRI) 80
Number of light sources 8
Light source color 830 warm white
Optical cover type Polycarbonate bowl/cover frosted
Luminaire light beam spread 50° x 70°
Optic-type outdoor Distribution-wide

Operating and Electrical

Input Voltage 220-240 V
Line Frequency 50 to 60 Hz
Inrush current 45 A
Inrush time 0.285 ms
Power Consumption 47 W
Power Factor (Fraction) 0.96
Connection Screw connection block 5-pole
Cable –
Number of products on MCB of 16 A type B 10

Temperature

Ambient temperature range -40 to +35 °C

Controls and Dimming

Dimmable Yes
Driver/power unit/transformer Power supply unit with DynaDimmer
Control interface –
Constant light output No

Mechanical and Housing

Housing Material Aluminum
Reflector material –
Optic material Acrylate
Optical cover material Polycarbonate
Fixation material Steel
Housing Color Silver
Mounting device Post-top for diameter 62 mm
Optical cover shape Conical
Optical cover finish Frosted
Overall length 570 mm
Overall width 570 mm
Overall height 317 mm
Overall diameter 570 mm
Effective projected area 0.088 m²
Dimensions (Height x Width x Depth) 317 x 570 x 570 mm
Parts color All parts colored

Approval and Application

Ingress protection code IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
Sustainability rating Lighting for circularity
Protection class IEC Safety class II
CE mark Yes
Warranty period 5 years
Flammability mark –
ENEC mark ENEC mark
Glow-wire test Temperature 650 °C, duration 5 s
EU RoHS compliant Yes

Initial Performance (IEC Compliant)

Luminous flux tolerance +/-7%
Initial chromaticity (0.43, 0.40) SDCM <5
Power consumption tolerance +/-10%
UInit. Color Rendering Index Tolerance +/-2

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h 0.5 %
Control gear failure rate at median useful life 100000 h 10 %
*Lumen maintenance at median useful life 100000 h** 94

Application Conditions

Performance ambient temperature Tq 25 °C
Maximum dim level 50%

Product Data

Order product name BDP102 LED60/830 II DW PCF SI LS-8 62P
Full product name BDP102 LED60/830 II DW PCF SI LS-8 62P
Full product code 871869632058700
Order code 910500991224
Material Nr. (12NC) 910500991224
Net Weight (Piece) 6.780 kg
EAN/UPC – Product/Case 8718696320587
Numerator – Packs per outer box 1
EAN/UPC – Case 8718696320587

© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.