SENCOR S70 Electric Scooter User Manual
- August 20, 2024
- SENCOR
Table of Contents
SENCOR S70 Electric Scooter
Product Specifications
- Electric Scooter Model: SCOOTER S70
- LED Front Light
- Mechanical Brake and Bell
- Foldable Mechanism Release Lever
- Suspension Front Fork
- Electric Motor with Front Electric Brake
- Control Switch/Panel
- Transport Locking Hook
- Turn Signal
- Turn Signal Control
- Charging Port
- Battery Compartment
- Kickstand
- Handlebar Folding Cutout
- Rear LED Light/Brake Light
- Mechanical Disc Brake
Assembly of the Scooter
Follow these steps to assemble the scooter:
- Connect the handlebar to the handlebar tube, ensuring the LED light faces forward.
- Tighten the four hex screws for handlebar mounting.
Powering On the Scooter
Before riding, ensure the battery is fully charged. To power on the scooter:
- Turn on the control panel and check the battery level.
- Use the included charger to charge the scooter. Uncover the charging port, connect the charger, and then plug it into a power outlet.
Operating the Scooter
To operate the scooter:
- Adjust riding modes using the multifunction button: Walk (up to 6 km/h), Eco (up to 10 km/h), Drive (up to 20 km/h), Sport (up to 25 km/h).
- To switch modes, press the multifunction button twice.
- To start riding, follow the specific steps mentioned in the manual while ensuring the scooter is stationary.
Charging Instructions
To charge the scooter:
- Check battery status before each ride.
- Connect the charger to the scooter’s charging port and then plug it into a power outlet.
- After charging, disconnect the charger and cover the charging port.
Frequently Asked Questions
Q: How do I activate the turn signals on the scooter?
To activate turn signals:
- Press the right button for right turn signal or left button for left turn signal located on the handlebar ends.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>