n-com SPCOM00000027 Right Cable Instruction Manual
- June 3, 2024
- N-Com
Table of Contents
n-com SPCOM00000027 Right Cable Instruction
INSTRUCTIONS FOR REPLACING THE SPCOM00000027
- Remove the N-Com system from the helmet (see instruction booklet).
- Open the e-box (Fig. 1-2).
- If necessary, disconnect the antenna connector (Fig. 3-4).
- Remove the wiring to be replaced and position the new wiring connector in the counterpart on the electronic card (Fig. 5).
- If previously removed, reconnect the antenna to the card.
- Close the e-box (Fig. 6-7).
- Reposition the N-Com system inside the helmet (see instruction booklet).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>