tp-link TL-PA4010 Powerline Wi-Fi Range Extender Installation Guide

: August 17, 2024
: tp-link

Table of Contents

tp-link TL-PA4010 Powerline Wi-Fi Range Extender
Specifications
Product Usage Instructions
Plug and Play
Unify Your Wi-Fi Networks via WPS
Create a Secure Powerline Network by Pairing
Physical Appearance
FAQ
Safety Information
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link TL-PA4010 Powerline Wi-Fi Range Extender

Specifications

Speed: 600Mbps
Buttons: Pair/Reset Button
LED Indicators: Power LED, Powerline LED, Ethernet LED, Wi-Fi LED
Ports: Ethernet Port

Product Usage Instructions

Plug the extender into a power outlet on the same service panel. Wait for the Powerline LED to turn on.
Plug the extender into a power outlet and connect it to the router’s LAN port using an Ethernet cable.
To unify your Wi-Fi networks, plug in the extender in the same room as your router. Press the router’s WPS button and then the extender’s Wi-Fi button to copy the settings.
Pair two devices by pressing the Pair buttons on the adapter and extender within 2 minutes of each other. Once the Powerline LED turns on, the network is created.
If you have more extenders, plug them in and pair them with the existing adapter to automatically sync Wi-Fi settings.

Quick Installation Guide

The European version is used for demonstration in this guide.
Images may differ from actual products.

Plug and Play

Plug the adapter into a power outlet and connect it to the router’s LAN port via an Ethernet cable.
Plug the extender into a power outlet on the same service panel. Wait until the extender’s Powerline LED turns on.
Note: If the LED is off, please refer to FAQ > Q2.
Enjoy!
Connect your devices to the internet using the default SSID (network name) and password on the label at the top of the extender.

Tip
Want to unify or personalize your network? See the back page for instructions.

Attention

Use the product only in the upright direction.
Plug powerline devices into wall outlets instead of power strips.
Note: Using a power strip will affect network performance or even cause connection drops.

Unify Your Wi-Fi Networks via WPS

Copy your SSID and password from your router via WPS to create one unified Wi-Fi network throughout your home.

Note: If your router doesn’t have a WPS button, manually change the extender’s Wi-Fi settings via the tpPLC app, tpPLC Utility, or web interface

Plug in the extender in the same room as your router. Wait until the extender’s Wi-Fi LED turns on.
Press your router’s WPS button. Within 2 minutes, press the extender’s Wi-Fi button for 1 second. The extender’s Wi-Fi LED starts blinking. When it stays on, Wi-Fi settings are copied.
Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender’s Wi-Fi settings.
Relocate the extender and enjoy the internet using your router’s SSID and password.

Create a Secure Powerline Network by Pairing

Note: You can only pair two devices at a time. We recommend that you plug in the powerline devices near each other when pairing.

Press the Pair button on the adapter for 1 second. Its Power LED should start blinking.
Note: If the Power LED does not blink, press the Pair button again.
(Within 2 minutes) Press the extender’s Pair button for 1 second. Its Power LED should start blinking.
When the extender’s Powerline LED turns on, a powerline network has been successfully created.

Sync Wi-Fi Settings to More Extenders

If you have more extenders, simply plug in and pair each one with the existing adapter to join the network.
Then the Wi-Fi settings will automatically sync from the existing extender to the new ones.

Physical Appearance

If the device connected to TL-PA4010 is turned off or inactive for more than 5 minutes, TL-PA4010 will automatically switch to Power-Saving Mode.

ITEM DESCRIPTION

Personalize Your Network tpPLC App

For easy management via your smartphone or tablet, download the app from the App Store or Google Play, or simply scan the QR code.

tpPLC Utility

For easy management via your computer, download the utility on the product’s Support page at https://www.tp-link.com.
Note: For detailed instructions, refer to the utility manual on the product’s Support page.

Web Interface

To access all settings, connect to an extender wirelessly and visit http://tplinkplc.net.
Note: For detailed instructions, refer to the product manual on the product’s Support page.

FAQ

Q1. How do I reset my adapter and extender to the factory default settings?
- A1. For TL-PA4010, press and hold the Pair button until all LEDs turn off and then come back on.
- A2. For TL-WPA4220, press and hold the Reset button for at least 2 seconds. Release the button and all LEDs turn off. When the LEDs turn back on, the reset process is complete.
Q2. What should I do if the Powerline LED is off?
- A1. Try another wall socket and make sure all powerline devices are on the same service panel.
- A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
- A3. If the problem persists, contact our Technical Support.
Q3. What should I do if there is no internet connection in my powerline network?
- A1. Make sure all powerline adapters and extenders are on the same service panel.
- A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all devices again.
- A3. Make sure all devices are correctly and securely connected.
- A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
Q4. What should I do if a successfully paired extender does not reconnect after it is relocated?
- A1. Make sure all powerline adapters and extenders are on the same service panel.
- A2. Try to pair the extender again, and make sure the Powerline LED is on.
- A3. Check for possible interference due to a washing machine, air conditioner, or other household appliances that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical socket to remove the electrical noise if your powerline device has an integrated electrical socket.

TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca/

Safety Information

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
Plug the powerline devices directly into the wall outlets but not the power strips.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

CONTACT

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.