Danfoss MI90E152 User Instructions for LOP Instructions
- August 17, 2024
- Danfoss
Table of Contents
Danfoss MI90E152 User Instructions for LOP
Specifications
- Model: LOP
- Input Voltage: +24V
- Control Voltage: +10V
- Reference Range: 0-10 V
- Operating Frequency: 10 Hz
Product Usage Instructions
Kabeltilslutning (Cable Connection):
Connect the wires according to the color codes provided in the manual.
Ensure proper grounding for safe operation.
Function Reference:
Use the buttons to set reference values. Follow the table under the button
for specific functions.
Reset :
To reset the device, follow the instructions provided in the manual. Make sure
to disconnect the power before performing any reset procedures.
Jog Speed Adjustment:
To adjust the jog speed, refer to the frequency settings mentioned in the
manual. Make necessary adjustments based on your requirements.
User Instructions for LOP
Use the +/- keys to set reference*) In order to screen the cable wire, twist the metal wire round the cable wire and mount it under the cable strap.
SPECIFICATION
- If no reset is required, do not connect the brown wire or set jog frequency
Wiring
NB: After fitting, cut off excess wire.
Warning
- At power up the unit will always be in stop mode.
- Set reference will be stored during power down.
FAQ
- Q: What should I do if the unit is in stop mode at power up?
- A: Set the reference value again as it will be stored during power down. Follow the user manual for detailed instructions.
- Q: How do I connect the purple or grey wire for specific operations?
- A: Connect the purple wire for dual speed operation and the grey wire for dual direction operation. Refer to the color-coding provided in the manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>