Danfoss 069R9501 Liquid distributor Type RD Installation Guide
- August 19, 2024
- Danfoss
Table of Contents
Danfoss 069R9501 Liquid distributor Type RD Installation Guide
Recommended soldering material: Silver-Flo 55 + Easy-flow Flux
All tubes must be of the same length
Refrigerants:
Refrigerant valve models described may be used with any ASHRAE A1, A2, A2L and
A3 refrigerants when the saturation pressure of the refrigerant at 125 °F
(51.7 °C) does not exceed the marked design pressure rating of the
instruction.
A1 : Low toxicity and non-flammable
A2 : Low toxicity and flammable
A2L : Low toxicity and lower flammable
A3 : Low toxicity and highly flammable
These valve models are also suitable for use in secondary loop or cascade
systems charged with R744.
MWP = 49 bar (711 psig)
Read User Manual Online (PDF format)
Loading......