Danfoss Zigbee Repeater Installation Guide
- August 17, 2024
- Danfoss
Table of Contents
Danfoss Zigbee Repeater
Product Specifications
- Product Name: Zigbee Repeater
- Model Number: AN33005206123801-000104 / 088N2109 00
- Max Range: 30 meters
- Material: Metal/Steel
Product Usage Instructions
Installation
To install the Zigbee Repeater, follow the steps below:
- Place the repeater in a location within 30 meters of the Zigbee network.
- Ensure there are no obstructions such as metal or steel between the repeater and other Zigbee devices.
Including Repeater to Zigbee Network
To include the repeater in the Zigbee network:
- Ensure the repeater is powered on and within range of the Zigbee network.
- Follow the specific instructions for your Zigbee 3.0 network to add a new device.
LED Blinking Patterns
The repeater has specific LED blinking patterns to indicate its status. Refer to the user manual for detailed information on these patterns.
Lost Connection to Zigbee Network
If the repeater loses connection to the Zigbee network:
- Check the network connection and proximity to other devices.
- Follow the factory reset instructions if necessary.
Factory Reset
To perform a factory reset on the Zigbee Repeater:
- Refer to the user manual for detailed steps on resetting the device to its factory settings.
Frequently Asked Questions
- Q: How do I know if the repeater is successfully connected to the Zigbee network?
- A: The LED blinking patterns will indicate the status of the repeater’s connection to the Zigbee network. Refer to the user manual for details on these patterns.
- Q: What is the range of the Zigbee Repeater?
- A: The repeater has a maximum range of 30 meters. Ensure it is \placed within this range for optimal performance.
Placement
Installation
Ready for inclusion
Including Repeater to Zigbee network
Ping Test – from Zigbee Repeater
LED Blinking patterns
Identify – from App
Lost connection to Zigbee network
Factory reset (Zigbee Repeater)
Declaration of Conformity
Hereby, Danfoss A/S declares that the radio equipment type Zigbee Repeater is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following internet address: heating.danfoss.com
Danfoss A/S
Heating Segment
- danfoss.com
- +45 7488 2222
- E-Mail: heating@danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and all Danfoss logotypes are trademarks of Danfoss A/S. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>