Danfoss M30x1.5 Built In Valve Insert Installation Guide
- August 17, 2024
- Danfoss
Table of Contents
- Danfoss M30x1.5 Built In Valve Insert Installation Guide
- Sets for systems with flow coming from the bottom and with an M30x1.5
- Sets voor radiatoren met vloeraansluiting en M30x1,5 inbouwventiel
- Installation Guide
- Danfoss Thermostatic Sensors RAX-K
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Danfoss M30x1.5 Built In Valve Insert Installation Guide
Sets for systems with flow coming from the bottom and with an M30x1.5
built-in valve insert:
Sets voor radiatoren met vloeraansluiting en M30x1,5 inbouwventiel
Installation Guide
Danfoss Thermostatic Sensors RAX-K
- Remove the protective cap from the valve insert by turning it
- Ensure that the setting mark on the sensor is positioned at the top before mounting the
- Mount the thermostatic sensor on the valve and tighten it with a 32 mm spanner (max torque 15 Nm).
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>