JOYUTRY Z15 RGB Camping Lantern Speaker User Manual

JOYUTRY Z15 RGB Camping Lantern Speaker

Product Specifications

• Model: Z15
• Dimensions: 400*120mm
• Charging: TYPE-C port, 5V 1A
• Battery Life: Approximately 5 hours at 70% volume with lights off
• RGB Modes: 11 different color modes

Product Usage Instructions

Charging the Speaker
To charge the speaker:

1. Connect the provided TYPE-C charging cable to the charging port of the speaker.
2. Use a 5V 1A adapter for charging.
3. The indicator light will turn red while charging and green when fully charged.
4. Charging time is approximately 2.5-3 hours.

Night Light Function
To control the night light:

• Single click to turn on the light.
• Click to cycle through brightness levels (10%-50%-100%) and turn off.

Speaker Controls

• Long press to turn on/off the speaker.
• Single click to play/pause music.
• Double click for TWS function (pairing with another speaker).

RGB Modes:
The speaker has various RGB modes:

• Upon power on, the light color is yellow.
• Click the button to cycle through 11 different color modes.

Bluetooth Operation and TWS Function:
To use the wireless speaker:

• Long press to turn on the Bluetooth speaker and pair with the device named Z15.
• TWS Function: Double click one speaker to initiate TWS mode, indicated by a specific sound signal. Repeat to exit TWS mode.

Frequently Asked Questions (FAQ)

• Q: How long does it take to charge the speaker?
  A: It takes about 2.5-3 hours to fully charge the speaker.

• Q: What is the battery life of the speaker?
  A: The speaker provides approximately 5 hours of music playback at 70% volume with the lights off.

• Q: How do I control the RGB modes?
  A: Click the button to cycle through 11 different color modes available on the speaker.

• Q: What should I do if the speaker does not connect via Bluetooth?
  A: If the speaker is not connected via Bluetooth within 5 minutes, it will automatically turn off. Make sure to pair it within this timeframe.

User Manual
RGB Camping Lantern Speaker

Product Parameters

• Product Name: RGB Camping Lantern Speaker
• Interface: TYPE-C
• Input Voltage: 5V/1A
• LED Power：2.4W (12×0.2W/LED module）
• Bluetooth Name: Z15
• Speaker Power: 5W
• Response Frequency: 70Hz~18KHz
• Bluetooth Version: 5.1
• Bluetooth Distance: 10M
• Battery Capacity: 1800mAH
• Product Size: Ø88.5x240mm
• Material: ABS+PC
• Net Weight: 390g
• Standard: GB7000.1 GB7000.204
• Patent No. : ZL202430218914.X

Parts Description

1. Handel
2. Light cover
3. Speaker
4. Lights touch switch
5. Bottom anti-slip silicon
6. Charging inductor light
7. Operation Key
8. TYPE-C charging port
9. TYPE-C charging cable

Speaker charging

• Connect the type-C charging cable to the charging port of the speaker for charging.
• The charger adopts 5V 1A adapter.

When charging the speaker, the indicator light turns red, and when fully charged, the red light turns green. Charging time: It takes about 2.5-3 hours to charge without turning on the light.
Music time: about 5 hours (70% volume, light off)

Night light works
Single click turn on , and 10%-50%-100%-turn off for a cycle.

The Key function description

• Long press: turn on/off speaker
  • Single click: play/pause
  • Double click: TWS function
• Long press: turn on /off the RGB lights
  • Single click: the colorful lights to switch
• Long press: voice reduce
  • Single click: previous song
• Long press: Voice add
  • Single click: Next song

RGB modes
The light color will yellow when speaker power on, click will switch the color mode,total 11 models. Click lights will be yellow, green, red, ice blue, blue, purple, orange, RGB breathing, RGB gradient, RGB flowing light, and RGB rhythm.

Wireless speaker operation
Long press turn on the bluetooth speaker , and searching compare name Z15 connected.

Notify : The speaker will turn off when 5 mins later not connected the bluetooth model.

TWS function
Two RGB lantern speaker turn on , double click one of speaker will a sound “ tong “ , 3 seconds later two RGB lantern speaker same sound “tong” , it means TWS function working , double click a Lantern speaker again “tong tong “ sounds , Means TWS out of working .

Notify

1. Prohibited to use non-nominal voltage for charging.
2. Battery products ,keep away heat.
3. Please charging ,if not using at 3 Month.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>