Shenzhen JOYUTRY Electronic Technology Co LTD Z13T Wireless Charging Clock Bluetooth Speaker User Manual
- June 15, 2024
- Shenzhen JOYUTRY Electronic Technology Co LTD
Table of Contents
User Manual
Specification
Product Name:
Rated voltage: 5V 2A / 9V 2A
Wireless charging output: 5V 5W MAX / 9V 15W
MAX Maximum audio power: 10W
Response frequency: 70Hz~18KHz
Bluetooth version: V5.3
Bluetooth distance: ≥10M
Battery capacity: 2000mAH
Product size: 157x130x119mm
Material: ABS+PC
Executive standard: GB7000.1 GB7000.204
Patent Number: ZL202330114028.8
Part Name
1. Wireless charging area
3. Right knob key
5. eft knob key
7. Function keys
9. TYPE-C charging input port
11. TF card holder| 2. Silicone Handle
4. Display screen
6. Supported column base
8. Speaker hole
10. TYPE-C charging output port
12. TYPE-C USB cable
---|---
Installation instruction
-
Please connect the TYPE-C cable to the TYPE-C charging input port on the back of the product.
-
Please connect the other end of the TYPE-C USB cable to the charging adapter. (Charging adapter is not included in this product)
a. Recommended to use a charging adapter that supports QC2.0 or QC3.0 protocol.
b. Support 5W wireless charging when using 5V/2A charging adapter.
c. Support up to 15W wireless fast charging when using 9V/2A or QC2.0 or QC3.0 protocol compliant charging adapter. -
Please place the product on a flat table and plug the charging adapter into a power outlet.
-
When this product is energized, the charging indicator lights up red.
Speaker function Keys description
the left knob key
Press and hold for 2 seconds to speaker on/off
Double click to switch Bluetooth mode/time mode/TF card mode Bluetooth
mode:Click to play/pause music
Twirl to adjust the volume
White noise mode:Click to play/pause white noise
Twirl to adjust the white noise volume
the right knob key
Press and hold for 2 seconds to function setting
Click to confirm function setting
Twirl to select function
When it is Bluetooth mode, double click to TWS pairing
Display Brightness Adjustment Key
Click to adjust display brightness
12H/24H Setting Key
Click to Set up 12 hour/24 hour system
the previous track Key
Bluetooth mode/White noise mode/
TF card mode, click to switch to the previous track.
the next track Key
Bluetooth mode/White noise mode/
TF card mode, click to switch to the next track.
White noise playback key
Click to play/exit white noise
Use instruction
-
Speaker charging
Connect the TYPE-C cable to the speaker charging input port.
Charging indicator becomes red indicating the start of charging, and when fully charged, red light becomes green.
Charging time: about 4 hours without being used.
Music time: 3-4 hours in 70% volume state. -
White noise playback
Click Key to enter the white noise playback mode, built-in 20 music, the display shows S01-S20 accordingly. Click and to switch music. Twirl the left knob Key to adjust the volume, the display shows V00-V16, total 16 levels of volume adjustment. Click the left knob key to pause. Click key to exit white noise playback. By default, the volume is automatically adjusted to V03 after 60 minutes, and the music is turned off after 90 minutes. -
Bluetooth speaker
Bluetooth connection: press and hold the left knob key for 2 seconds to turn on the speaker going with a voice prompt ( Power ON, Bluetooth mode), the display lights up, the Z13-T speaker name and click pairing. After the Bluetooth connection is successful, the Bluetooth icon on the display is always on. Twirl the left knob key to adjust the volume, the display shows V00-V16, total 16 levels of volume adjustment.
Click the left knob key to pause. Click and to switch music.
-
No Bluetooth connection for ten minutes after powering on, the Bluetooth icon on the display will go off, exiting Bluetooth mode and switching to time mode.
TWS pairing: two speakers are on, double click the right knob key of either speaker, you will hear the “dong” beep, after 3 seconds two speakers will ring “dong” beep at the same time, which means the pairing is successful.
Double click the right knob key of any of the speakers again, “dong” beep will be heard, which indicating the unbinding of the TWS pairing.
Low battery alert: please recharge in time when the speaker battery power is insufficient, the speaker has a voice prompt (Low battery, please charge).-
Display brightness setting
Click to adjust the display brightness, 4 levels of brightness can be adjusted. The initial brightness is 100% , click to switch form 100% to 70% to 45% to 15% to close, click again to reach 100% brightness.
Within 10 minutes without key operation, the display brightness automatically adjusts to 15% brightness, with key operation it will switch back to the original setting of brightness. -
12-hour system and 24-hour system settings
Click to switch the time display 12/24 hour system. The display shows 12H or 24H, which means the current time is 12 hours or 24 hours. When 12H is displayed, the icon or will light up accordingly to indicate respectively. Without any key operation, the system returns to the the normal time display in 1 second. -
Time setting
When it is normal time display state press and hold the right knob key for 2 seconds to enter the time setting mode, then the current time hour part flashes, twirl the right knob key to adjust the hour, click the right knob key to confirm the hour value, then the current time minutes part blinks, twirl the right knob key to adjust the minutes, click the right knob key to confirm the minute value, then the time setting is completed, returning to the newly set time interface. If there is no operation in 5 seconds within the setting time of hour/ minute, it will be successful by default and exit to the time display state. Attention: After the Apple phone is successfully connected to Bluetooth, the display time is synchronized with the phone time. -
Alarm 1 time setting
When it is normal time display state, twirl the right knob key clockwise once, showing the time of alarm 1, meanwhile the alarm 1 icon ( ) blinks, the initial alarm clock is off. Click the right knob key to turn the alarm 1 on/off. Press and hold the right knob key for 2 seconds to enter the time setting of alarm 1, at this time the hour part of the current alarm clock flashes, twirl the right knob key to adjust the hour, click the right knob key to confirm, at this time the minute part of the current alarm clock flashes, twirl the right knob key to adjust the minute, click the right knob key to confirm. After setting the time, the alarm 1 icon ( ) is always on. -
Alarm clock 1 music setting
When it is normal time display state, twirl the right knob key clockwise twice, displaying alarm clock 1 music $01-S20 (indicating that the serial number of current alarm 1 clock music, a total of 20 music), and the initial alarm clock music is S01 with alarm 1 icon ( ) blinking or always on. Press and hold the right knob key for 2 seconds to enter the music setting of alarm 1, at this point the music number is blinking, twirl the right knob key to select the alarm clock music, a total of 20 music can be selected. Click the right knob key to confirm, after completing alarm 1 music setting, it will return to normal time display in 5 seconds. -
Alarm 2 time setting
When it is normal time display state, twirl the right knob key clockwise three times, showing the time of alarm 2, meanwhile the alarm 2 icon ( ) blinks, the initial alarm clock is off. Click the right knob key to turn the alarm 1 on/off. Press and hold the right knob key for 2 seconds to enter the time setting of alarm 2, at this time the hour part of the current alarm clock flashes, twirl the right knob key to adjust the hour, click the right knob key to confirm, at this time the minute part of the current alarm clock flashes, twirl the right knob key to adjust the minute, click the right knob key to confirm. After setting the time, the alarm 2 icon ( ) is always on. -
Alarm clock 2 music setting
When it is normal time display state, twirl the right knob key clockwise four times, displaying alarm clock 2 music S01-S20 (indicating that the serial number of current alarm 2 clock music, a total of 20 music), and the initial alarm clock music is S02 with alarm 2 icon ( ) blinking or always on. Press and hold the right knob key for 2 seconds to enter the music setting of alarm 2, at this point the music number is blinking, twirl the right knob key to select the alarm clock music, a total of 20 music can be selected. Click the right knob key to confirm, after completing alarm 2 music setting, it will return to normal time display in 5 seconds. -
Alarm clock and snooze
After the alarm function is turned on, it will ring for 5 minutes when the alarm time is up, corresponding to the alarm clock 1 ( ) or alarm chock 2 ( ) icon flashing. The alarm will automatically exit the alarm and retum to the time display state if there is no operation. Click any key of the alarm other than the right knob key to immediately stop and exit to the time display state. Click/Twirl the right knob key to stop the alarm and enter the snooze state, then the snooze icon ( ) on the display lights up. snooze time is fixed at § minutes: Click/Twirt the right knob key to enter the next snooze when the snooze alarm sounds, up to 12 snoozes. Click any other key to stop the alarm and exit the snoaze. -
Countdown timer
When it is normal time display state, twirl the right knob key clockwise five times to times to enter the countdown timer mode, the display shows 25 minutes 00 seconds. Click the right knob key to count down 25 minutes directly. Press and hold the right knob key for 2 seconds to enter the countdown timer setting, the minutes valve 25 flashing at this time. Twirl the right knob key to adjust the minutes, click the right knob key to confirm the minute value, at this time the seconds value 00 flashing. Twirl the right knob key to adjust the seconds, click the right knob key to confirm the second value to start the countdown. During the countdown, click the right knob kay to pause. Press and hold the right knob key to raset, when the timer is paused. Under the countdown timing state, twirl the right knob key to exit the countdown timer modo. After the countdown shows 00:00. the alarm has “tick” sound, while the display 00:00 flashes, alarming 5 minutes. Click the right knob key to stop the alarm when it sounds and no operation for ten seconds, automatically axit the countdown timer mode and retum to the time state. -
Positive Timer
When it is normal time display state, twirl the right knob key clockwise six times to enter the positive timer mode, the display shows 00 minutes 00 seconds. Click the right knob key to start positive timing, and then click the right knob key again to pause. Press and hold the right knob key to reset, when the timer is paused. The maximum positive timer is 99 minutes and 59 seconds. When the time is up, no operation for ten seconds, automatically exit and return to the time state. Twirl the right knob key to exit the positive timer mode. -
ON/OFF option setting for changing the display to the lowest brightness in 10 minutes When it is normal time display state, twirl the right knob key seven times to enter the setting mode of the ON/OFF option for changing the display to the lowest brightness in 10 minutes, the display shows L ON (default is ON), indicating that the display will be automatically dimmed in 10 minutes. Press and hold the right knob key for 2 seconds, ON blinks, and twirl the right knob key to switch OFF/ON, click the right knob key to confirm. Five seconds without key operation it will automatically exit and return to the time display. No memory after the speaker is turned off, and the default is ON when it is turned on.
-
Wireless charging
Place the mobile phone/headphones with wireless charging function in the wireless charging center area, your cell phone or headphones will be charged automatically. b. If there is no charging, please adjust the position of your phone or check whether your
phone has wireless charging function. Reminder: please remove the iron sheet before using the wireless charging function, which cannot be used if the mobile phone is affixed with the magnetic iron sheet of the car bracket.
-
Caution
- Please don’t place any other metal items in the wireless charging area and please keep the product dry. Please use a power adapter with an output voltage of DC 5V/2A or DC 9V/2A, or a fast charging power adapter that complies with QC2.0, QC3.0 protocols when using the wireless charging function.
- Please align and fully contact the wireless charging product with the wireless charging center area to achieve the best charging effect.
- Please don’t use non-nominal voltage for charging.
- Please keep product away from heat sources for containing lithium battery.
- Please charge it at least every 3 months in order to ensure the effective service life of the lithium battery.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
-This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.