AIGOSTAR 10QU9 Ceiling Fan With Light Instruction Manual
- August 16, 2024
- aigostar
Table of Contents
AIGOSTAR 10QU9 Ceiling Fan With Light
Product Information
Specifications:
- Model: XYZ-2000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Material: Plastic
- Power Source: 110V AC
Product Usage Instructions
Setup:
Place the product on a flat surface near a power outlet. Connect the power cord to the product and plug it into a 110V AC power source.
Operation:
Turn on the product using the power button located on the front panel. Use the control panel to adjust settings as needed.
Maintenance:
Regularly clean the product using a damp cloth. Avoid using harsh chemicals or abrasive materials that may damage the plastic surface.
Frequently Asked Questions
- Q: Can I use the product outdoors?
- A: It is recommended to use the product indoors to prevent exposure to weather elements.
- Q: How often should I clean the product?
- A: It is advisable to clean the product at least once a week to maintain optimal performance.
- Q: What should I do if the product malfunctions?
- A: In case of malfunction, refer to the troubleshooting section\ of the user manual or contact customer support for assistance.
Important safety instructions
The information contained herein has been prepared to ensure you of trouble- free operation of this product. Read instructions carefully for safe installation and operation.
- Before performing any electrical connection or cleaning operation on the device, ensure that the general power supply of the installation is disconnected and turned off by removing the corresponding fuses or protective switches installed for ‘disassembly’, to ensure complete isolation of the power supply.
- The installation must be carried out by qualified personnel in accordance with the current national standards for electrical installation. Remember to ask the installer to test all fan functions. If you have any questions about the installation process, please contact us.
- You must ensure that the mounting bracket is securely fixed to the roof structure using screws that can withstand a weight of at least 30 kg. The screws must be at least 30 mm in length and properly threaded into the ceiling. If the fan is installed on a roof junction box, the fan bracket must be securely fixed to prevent the fan from \becoming loose or rotating.
- The method for fixing the fan bracket to the ceiling will vary depending on the type of ceiling where the installation is located. The installer is responsible for determining which fixing system to use and how many to use.
- Do not insert any objects that may come into contact with the fan blades during rotation, as this could cause injury to people. Damaged blades and unbalanced units can cause vibration and swinging
- If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service, or similar qualified personnel to avoid danger.
- For optimal use, this product should be used in a dry indoor environment as it is not waterproof.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Specifications
This product contains a light source of energy efficiency class< E> for (EU) 2019/2015.
Input voltage | 220-240V~ |
---|
Frequency
|
50/60Hz
Power of the lamp
|
40W
Luminous flex
|
4400Im
Color temperature| 2700-6500K
Power of the fan| 20W
Fan speed levels| 6
Remote control distance| 8-10m
Product Overview
Installation instructions
Step 1: Install the wall plug.
Note: Please turn off all switches and ensure there is no power supply during installation. If the roof is made of concrete, drill four holes according to the position of the holes on the mounting plate, and then insert the wall plug. If the roof is made of wood, this step is not necessary.
Step 2: Install the plate.
Thread the power cord through the holes on the mounting plate and secure it at the top with four wooden screws.
Step 3: Install the motor.
Hang the safety rope of the fan onto the hook on the mounting plate.
Connect the yellow-green ground wire to the ground wire. Connect the blue wire to the zero wire. Connect the brown wire to the fire wire.
Clip the keyhole on the fan connection plate into the two screws on the mounting plate. Then tighten the tour screws.
The installation is done and turn on the power for use. Instruction for remote control
- Open the battery cover of the remote control and insert two 1.5V AAA batteries. Then, close the battery cover.
- Remote control pairing code: Turn on the power, and press the pairing code button within 5 seconds until you hear a “beep”.
Note:
- After setting the timer, please do not press any buttons on the remote control, otherwise, the timer will be canceled.
- If the remote control is not used for a long time, please remove the batteries.
- ITALIA MARKET SRL
- VIA DELLE INDUSTRIE, 9/1
- 20883 MEZZAGO(MB), ITALIA
- P.IVA: IT10502730962
- http://WWW.AIGOSTAR.COM
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>