UltraLux KVMxx Extender Over Cat Installation Guide
- August 16, 2024
- ULTRALUX
Table of Contents
UltraLux KVMxx Extender Over Cat
Models
- KVM1231B
- KVM1231W
- KVM1241B
- KVM1241W
CLEANING
Taking Care of the Natural Environment Cleanliness
- The product and its components are not harmful to the environment.
- Please dispose of the package elements separately in containers for the corresponding material.
- Please dispose of the broken product separately in containers for out of usage electrical equipment.
FAQs
What should I do before starting the installation?
Turn off the power supply to avoid the risk of electric shock.
Can I mount the lighting fixture on any base?
No, the base must have an ignition temperature greater than 200°C and should not deform (e.g., metal, gypsum, concrete).
What should I do if the power cable of the lighting fixture is damaged?
It must be replaced by the manufacturer, their authorized representative, or a technically qualified specialist to prevent accidents and damage.
How should I clean the lighting fixture?
Clean it with a dry cloth.
What should I do before replacing any components?
Wait for the body to cool down and disconnect the fixture from the electrical network.
INSTALLATION
- Turn off the power supply.
- Disassemble the console.
- Use the mounting bracket as a template and mark the locations of the holes.
- Drill holes in the ceiling using an appropriate drill bit.
- Fix the mounting bracket to the ceiling using the included fasteners in the kit.
- Mount the cable gland and the steel string fasteners onto the console.
- Thread the steel strings through the threaded end cap.
- Thread the extension cable through the cable gland and the extension strings through the fasteners, ensuring they are of equal length.
- Connect the extension wire to the ceiling’s cable outlet.
- Secure the console to the mounting bracket.
- Screw the end caps onto the ceiling lamp’s mounting base using the screws and the previously installed end caps.
- Rotate the ceiling lamp clockwise onto the mounting base.
- Use the included terminal block to connect the ceiling lamp to the extension cable, ensuring proper polarity:Brown (L ) – Line Blue ( N ) – Neutral
- Before turning on the power, select the desired color temperature using the switch located near the driver box.
- Turn on the power supply.
SAFETY INSTRUCTIONS
- Performing any actions with electrical power on carries the potential danger of electric shock. The electrical power must be turned off before starting any work.
- Mount the lighting fixture only on a base that has an ignition temperature greater than 200°( and does not deform (e.g., metal, gypsum, concrete).
- The lighting fixture should be connected to the power supply of a properly installed electrical system that meets the actual requirements by a qualified professional.
- All cables and auxiliary elements must be placed at an appropriate distance from the heated parts of the lighting fixture. When installing, pay attention to the requirements for the minimum distance to illuminated objects.
- The body may heat up during operation; therefore, wait for it to cool down before replacing any components.
- Before replacement, disconnect the fixture from the electrical network.
- Clean with a dry cloth.
- Do not cover the lighting fixture to prevent the risk of fire. Ensure free access of air to the heated components.
- If the power cable of the lighting fixture is damaged, it must be replaced by the manufacturer, their authorized representative, or a technically qualified specialist to prevent accidents and damage.
- Before turning on the fixture, ensure that its installation has been carried out correctly, eliminating the risk of operational defects, environmental hazards, and user safety.
- The importer (supplier) is not responsible for any damages resulting from non-compliance with the above installation recommendations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>