TRAXXAS 77096-4 Brushless Electric Monster Truck Installation Guide

: August 16, 2024
: Traxxas

Table of Contents

TRAXXAS 77096-4 Brushless Electric Monster Truck
Product Usage Instructions
Installation
WHAT’S IN THE BOX
WHAT YOU’LL NEED TO RUN YOUR MODEL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRAXXAS 77096-4 Brushless Electric Monster Truck

Specifications

Model: 77096-4
Scale: 1/10th Scale
Speed: 45+mph out of the box on 8S
Power Source: LiPo batteries (sold separately)
Features: Waterproof Receiver Box, Fully Adjustable GTXTM Aluminum Shocks, Precision Hex Hardware, Adjustable Battery Hold Down

Product Usage Instructions

Charging Instructions
Use a LiPo balance charger to charge the batteries.
Ensure the batteries are properly connected and monitor the charging process closely.

Assembly and Setup

Follow the fully illustrated, step-by-step instructions provided in the manual for assembly and setup.
Install the optional speed gear included for higher speeds.

Maintenance

Regularly check and tighten all screws and connections.
Clean the model after each use to prevent dirt buildup.
Inspect the drivetrain and shocks for wear and tear, and replace if necessary.

FAQ

Q: What type of batteries does this model require?
A: This model requires LiPo batteries, which are sold separately. Follow all safety precautions when handling and charging LiPo batteries.
Q: Can I operate this model indoors?
A: No, this model should not be operated indoors or in crowded areas. It requires open spaces for safe operation.
Q: How fast can this model go?
A: With the optional speed gear installed, this model can achieve speeds of 45+mph out of the box on 8S.

Installation

IMPORTANT
Help the environment by disposing of your product responsibly. The wheelie bin logo indicates the product and batteries must not be disposed of in domestic waste. Please use designated collection points or recycling facilities when disposing of the item or batteries.

WHAT’S IN THE BOX

X-Maxx®, Ready-To-Race model with Velineon® 1200XL motor
Velineon® VXL-8s waterproof electronic speed control with integrated telemetry
TQi® 2.4GHz radio system
Quick Start Guide
Handy tool set

Note: Wheels and tires must be installed.

WHAT YOU’LL NEED TO RUN YOUR MODEL

(Sold separately at your hobby dealer)

Two Traxxas 4S LiPo battery packs with High-Current Connector
Traxxas iD™ Battery Charger
4 AA Alkaline Batteries

SKILL LEVEL 6
For Advanced Drivers Only. Previous experience with radio controlled models is required! These models are very large, capable of high speed an acceleration, and require the use of LiPo batteries! These models are intended for advanced users that have the experience, knowledge, and maturity to safely operate and maintain the vehicle and the LiPo battery system for the safety of themselves and others.

IMPORTANT! THIS PRODUCT IS NOT DESIGNED FOR CHILDREN OR MINORS YOUNGER THAN 14 YEARS OLD. YOUNGER THAN 18 YEARS OLD REQUIRES RESPONSIBLE ADULT SUPERVISION DURING OPERATION AND MAINTENANCE. READ ALL ENCLOSED AND AVAILABLE WARNINGS AND PRECAUTIONS BEFORE OPERATING THIS MODEL.
This is a high-performance model which is NOT intended for use on public roads or in congested areas where its operation may conflict with or disrupt pedestrian or vehicular traffic. Read all enclosed information before operating. Fully illustrated, step-by-step instructions describe adjustment, operation, and required maintenance procedures. This model should not be operated in a crowd, indoors or without adequate space.
This model requires LiPo batteries. LiPo batteries
have a severe risk of fire and injury if they are improperly handled, abused, or misused. User must read and understand all included instructions, warnings, and precautions regarding the handling, care, and use of LiPo batteries. A LiPo balance charger is required to charge the batteries. Consult Traxxas or your hobby dealer if you do not know what a LiPo balance charger is.
In an effort to continually upgrade our products, Traxxas reserves the right to make improvements and modifications to this model, which may not be reflected in the photographs and specifications printed on this box.