HAOLIYUAN GB03C Smart Gateway User Manual
- June 6, 2024
- HAOLIYUAN
Table of Contents
Know about the Smart Gateway
This smart gateway, adopting super low power consumption wireless technology, can work with kinds of smart sensors and smart home appliances to build a smart home system and the gateway works as the central controller. Built-in Wi-Fi module supports direct connection to user’s home Wi-Fi network.
Quick Installation Guide
- (If you have installed the smart life APP on your mobile phone, please go to step2)Scan below QR code or search Smart Life in APP Store or Google Play to install APP(new user must register an account first)
https://smartapp.tuya.com/smartlife
2. Connect the mobile phone to your 2.4GHz Wi-F1 router(with internet) and
plug in the Smart Gateway to the outlet.
3. (of the blue LED is blinking, please go to step4) Pressing the button for
5 seconds until the blue LED blinks.
4. Run Smart Life APP, Click＇＋’” at the top right corner
Optin ONE:
It will be discovered automatically as below, click “Go go add” and follow the
in-app instructions to connect the smart gateway to your network.
Open ONE:
If it can t be discovered, please select Gateway Control-> Wireless Gateway(Bxx) to add it manually. then follow the in-app instructions to connect the smart gateway to your network.
5. Waiting for a few seconds, you can see the gateway is shown and you may rename it.
6. Press Done to finish the installation of the gateway.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.