TRAXXAS 77097-4 4 Green X Maxx Monster Ultimate Truck User Manual

May 15, 2024
Traxxas

TRAXXAX-LOGO

TRAXXAS 77097-4 4 Green X Maxx Monster Ultimate Truck

  TRAXXAS-77097-4 -4-Green-X-Maxx -Monster-Ultimate -Truck-
PORODUCT

Product Specifications:

  • Model Numbers: 5106A, 5108A, 5107A, 5196A, 5196X, 5106, 4611, 5120A, 5180A, 5119, 5116, 7715, 7710, 7713X, 7711, 7868-BLUE, 7868-GRN, 7811G, 7811, 7711X, 7868X, 7811R, 7711T, 7811X, 7817, 7817X, 7817G, 7817T, 7817R, 7712, 7733, 7734, 7735, 7736, 7745, 7744, 7719, 7718, 7724
  • Product Categories: Bearings & Bushings, Body & Accessories, Bumpers & Skidplates, Chassis & Attachments, Cush Drive Components, Differential Components, Driveline Components, Front Suspension & Steering, Hardware, LED Lights, Motors & Electronics, Radio System, Batteries & Chargers

Product Usage Instructions

Bearings & Bushings:
Ensure all bearings and bushings are properly lubricated before installation. Refer to the user manual for specific locations and maintenance instructions.

Body & Accessories:
Mount the body using the provided hardware and foam pads for vibration dampening. Secure all body mounts tightly to prevent shifting during operation.

Bumpers & Skidplates:
Install the front and rear bumpers using the bumper mounts and support provided. Attach the skidplates to protect the chassis from impact.

Chassis & Attachments:
Secure the battery hold-downs and mounts as directed. Install the receiver box and wire cover for electronic components protection.

Cush Drive Components:
Assemble the cush drive components according to the user manual to ensure proper drivetrain functionality.

Differential Components:
Properly set up and maintain the differential components for optimal performance and handling of the vehicle.

Front Suspension & Steering:
Adjust the front suspension and steering components for desired handling characteristics. Ensure all parts are securely fastened to prevent any play.

Hardware:
Use the provided hardware for assembly and maintenance tasks. Refer to the part listings for specific hardware requirements.

Motors & Electronics:
Install and configure motors and electronic components according to the manufacturer’s instructions. Ensure proper wiring and connections for safe operation.

Radio System, Batteries & Chargers:
Set up the radio system and batteries as per the user manual.  Use compatible chargers to charge the batteries safely.

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically.

Bearings & Bushings

  • 5106A
    Ball bearing, black rubber sealed (15x24x5mm) (2)

  • 5108A
    Ball Bearing, black rubber sealed (15x26x5) (2)

  • 5107A
    Ball Bearing, black rubber sealed (17x26x5) (2)

  • 5196A
    Ball bearing, black rubber sealed (20x32x7mm) (2)

  • 5196X
    Ball bearing, black rubber sealed, stainless (20x32x7mm) (2)

  • 5106
    Ball Bearing, blue rubber sealed (15x24x5) (2)

  • 4611
    Ball bearings (5x11x4mm) (2)

  • 5120A
    Ball bearings, black rubber sealed (12x18x4mm) (2)

  • 5180A
    Ball bearings, black rubber sealed (6x13x5mm) (2)

  • 5119
    Ball bearings, blue rubber sealed (10x15x4mm) (2)

  • 5116
    Ball bearings, blue rubber sealed (5x11x4mm) (2)

Body & Accessories

  • 7715
    Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)

  • 7710
    Body reinforcement set (fits #7711 body)

  • 7713X
    Body support, rear/ 3x15mm CS (2) / 3x15mm flat-head machine (2) (fits X-Maxx®)

  • 7711
    Body, X-Maxx® (clear, trimmed, requires painting)/ window masks/ decal sheet

  • 7868-BLUE
    Body, X-Maxx® Ultimate, blue (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)

  • 7868-GRN
    Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)

  • 7811G
    Body, X-Maxx®, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)

  • 7811
    Body, X-Maxx®, orange (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)

  • 7711X
    Body, X-Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet

  • 7868X
    Body, X-Maxx® Ultimate, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet

  • 7811R
    Body, X-Maxx®, red (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)

  • 7711T
    Body, X-Maxx®, Rock n’ Roll (painted, decals applied) (assembled with tailgate protector)

  • 7811X
    Body, X-Maxx®, Solar Flare (painted, decals applied) (assembled with front & rear body mounts, rear body support, and tailgate protector)

  • 7817
    Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)

  • 7817X
    Skid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)

  • 7817G
    Skid plate, roof (body) (green)/ 3x15mm CS (4) (requires #7713X to mount)

  • 7817T
    Skid plate, roof (body) (orange)/ 3x15mm CS (4) (requires #7713X to mount)

  • 7817R
    Skid plate, roof (body) (red)/ 3x15mm CS (4) (requires #7713X to mount)

  • 7712
    Tailgate protector/ 3x8mm flathead screw (4)

Bumpers & Skidplates

  • 7733
    Bumper mount, front/ bumper support

  • 7734
    Bumper mount, rear/ bumper support

  • 7735
    Bumper, front

  • 7736
    Bumper, rear

  • 7745
    Skidplate, center

  • 7744
    Skidplate, front (1), rear (1)/ rubber impact cushion (2)

Chassis & Attachments

  • 7719
    Battery hold-down (2)/ foam pad (2)

  • 7718
    Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4)

  • 7715
    Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)

  • 7724
    Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3×15 CS (4)

  • 7733
    Bumper mount, front/ bumper support

  • 7734
    Bumper mount, rear/ bumper support

  • 7735
    Bumper, front

  • 7736
    Bumper, rear

  • 7722
    Chassis

  • 7714X
    Chassis top brace

  • 7723
    Nerf bars, chassis (2)

  • 7725
    Seal kit, receiver box (includes o-ring, seals, and silicone grease)

  • 7745
    Skidplate, center

  • 7744
    Skidplate, front (1), rear (1)/ rubber impact cushion (2)

  • 7717X
    Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2)

  • 7799
    Tires, rubber (2) (fits Traxxas® #7775X wheelie bar wheels)

  • 7776
    Wheelie bar, black (assembled)

  • 7775
    Wheels, wheelie bar (2)/ axles, wheelie bar (2)/ 10x15x4 plastic bushings (4) (for #7776, 8976, or 9576 wheelie bar)

  • 7775X
    Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)

  • 7775A
    Wheels, wheelie bar, 6061-T6 aluminum (dark titanium-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)

  • 7775G
    Wheels, wheelie bar, 6061-T6 aluminum (green-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)

  • 7775T
    Wheels, wheelie bar, 6061-T6 aluminum (orange-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)

  • 7775R
    Wheels, wheelie bar, 6061-T6 aluminum (red-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)

Cush Drive Components

  • 7794
    Cush drive key/ pin/ elastomer damper

  • 7793X
    Housing, cush drive (front & rear halves)

  • 6442
    Spur gear, 46-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)

  • 6447R
    Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

  • 6443
    Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)

  • 6448R
    Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

  • 6444
    Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)

  • 6449X
    Spur gear, 54-tooth, steel (1.0 metric pitch)

  • 6449R
    Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

Differential Components

  • 7781X
    Carrier, differential (aluminum)/ (requires #7783X spider gear shaft)

  • 7781
    Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW

  • 5136X
    Differential oil kit (1 each: 10K, 30K, 50K weights)

  • 7880
    Differential, front, complete (fits X-Maxx® 8s or XRT®)

  • 7881
    Differential, rear, complete (fits X-Maxx® 8s or XRT®)

  • 7782
    Gear set, differential (output gears (2)/ spider gears (4)/16X23.5X.5 TW(2))

  • 5041
    Grease, premium high performance (20cc)

  • 7780
    Housing, differential (front/rear)

  • 7780-BLUE
    Housing, differential (front/rear), 6061-T6 aluminum (blue-anodized)

  • 7780-GRAY
    Housing, differential (front/rear), 6061-T6 aluminum (gray-anodized)

  • 7780-GRN
    Housing, differential (front/rear), 6061-T6 aluminum (green-anodized)

  • 7780-ORNG
    Housing, differential (front/rear), 6061-T6 aluminum (orange-anodized)

  • 7780-RED
    Housing, differential (front/rear), 6061-T6 aluminum (red-anodized)

  • 5040
    Oil, differential (20M wt) (standard)

  • 7790
    Pinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)

  • 7791
    Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)

  • 7792
    Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

  • 7783X
    Spider gear shaft (2)/ spacers (4)/16×23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

  • 7783
    Spider gear shaft (2)/ spacers (4)/16X23.5X.5 TW (2)

Driveline Components

  • 7794
    Cush drive key/ pin/ elastomer damper

  • 7754X
    Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft)

  • 7754R
    Drive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated)

  • 7755
    Driveshaft assembly, center, aluminum

  • 7750X
    Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R)

  • 5040
    Oil, differential (20M wt) (standard)

  • 7751X
    Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft)

  • 7836-BLUE
    Steering blocks, 6061-T6 aluminum (blue-anodized), left & right

  • 7836-GRAY
    Steering blocks, 6061-T6 aluminum (gray-anodized), left & right

  • 7836-GRN
    Steering blocks, 6061-T6 aluminum (green-anodized), left & right

  • 7836-ORNG
    Steering blocks, 6061-T6 aluminum (orange-anodized), left & right

  • 7836-RED
    Steering blocks, 6061-T6 aluminum (red-anodized), left & right

  • 7836
    Steering blocks, left & right

  • 7737X
    Steering blocks, left & right (requires 20x32x7 ball bearings)

  • 7836X
    Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)

  • 7768A
    Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft)

  • 7768
    Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft)

  • 7768G
    Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)

  • 7768T
    Stub axle, aluminum, (orange-anodized) (1) (for use only with #7750X or 7896 driveshaft)

  • 7768R
    Stub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)

  • 7758A
    Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

  • 7758
    Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)

  • 7758-GRAY
    Wheel nuts, splined, 17mm, serrated (gray-anodized) (4)

  • 7758G
    Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

  • 7758T
    Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)

  • 7758R
    Wheel nuts, splined, 17mm, serrated (red-anodized) (4)

Front Suspension & Steering

  • 7726
    Bulkhead tie bar, upper (1)/ lower (2) (steel)

  • 7721
    Bulkhead, front (lower)

  • 7720X
    Bulkhead, front (upper)

  • 7832-BLUE
    Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right

  • 7832-GRAY
    Caster blocks (c-hubs), 6061-T6 aluminum (gray-anodized), left & right

  • 7832-GRN
    Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right

  • 7832-ORNG
    Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right

  • 7832-RED
    Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right

  • 7732
    Caster blocks (c-hubs), left & right

  • 7832
    Caster blocks (c-hubs), left & right

  • 7879-BLUE
    Drag link, 6061-T6 aluminum (blue-anodized)

  • 7879-GRAY
    Drag link, 6061-T6 aluminum (gray-anodized)

  • 7879-GRN
    Drag link, 6061-T6 aluminum (green-anodized)

  • 7879-ORNG
    Drag link, 6061-T6 aluminum (orange-anodized)

  • 7879-RED
    Drag link, 6061-T6 aluminum (red-anodized)

  • 7716
    Mount, tie bar, front (1)/ rear (1)

  • 7747-BLUE
    Servo horn, steering, 6061-T6 aluminum (blue-anodized)

  • 7747-GRAY
    Servo horn, steering, 6061-T6 aluminum (gray-anodized)

  • 7747-GRN
    Servo horn, steering, 6061-T6 aluminum (green-anodized)

  • 7747-ORNG
    Servo horn, steering, 6061-T6 aluminum (orange-anodized)

  • 7747-RED
    Servo horn, steering, 6061-T6 aluminum (red-anodized)

  • 7747
    Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)

  • 7739
    Shock tower, front (left & right halves)

  • 7746-BLUE
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, blue-anodized) (fits X-Maxx®)

  • 7746-GRAY
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, gray-anodized) (fits X-Maxx®)

  • 7746-GRN
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, green- anodized) (fits X-Maxx®)

  • 7746-ORNG
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, orange- anodized) (fits X-Maxx®)

  • 7746-RED
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, red-anodized) (fits X-Maxx®)

  • 7746
    Steering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

  • 7836-BLUE
    Steering blocks, 6061-T6 aluminum (blue-anodized), left & right

  • 7836-GRAY
    Steering blocks, 6061-T6 aluminum (gray-anodized), left & right

  • 7836-GRN
    Steering blocks, 6061-T6 aluminum (green-anodized), left & right

  • 7836-ORNG
    Steering blocks, 6061-T6 aluminum (orange-anodized), left & right

  • 7836-RED
    Steering blocks, 6061-T6 aluminum (red-anodized), left & right

  • 7836
    Steering blocks, left & right

  • 7737X
    Steering blocks, left & right (requires 20x32x7 ball bearings)

  • 7836X
    Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)

  • 7746X
    Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

  • 7831
    Suspension arm, black, lower (left, front or rear), heavy duty (1)

  • 7830
    Suspension arm, black, lower (right, front or rear), heavy duty (1)

  • 7831X
    Suspension arm, blue, lower (left, front or rear), heavy duty (1)

  • 7830X
    Suspension arm, blue, lower (right, front or rear), heavy duty (1)

  • 7831G
    Suspension arm, green, lower (left, front or rear), heavy duty (1)

  • 7830G
    Suspension arm, green, lower (right, front or rear), heavy duty (1)

  • 7731
    Suspension arm, lower (left, front or rear) (1)

  • 7730
    Suspension arm, lower (right, front or rear) (1)

  • 7831T
    Suspension arm, orange, lower (left, front or rear), heavy duty (1)

  • 7830T
    Suspension arm, orange, lower (right, front or rear), heavy duty (1)

  • 7831R
    Suspension arm, red, lower (left, front or rear), heavy duty (1)

  • 7830R
    Suspension arm, red, lower (right, front or rear), heavy duty (1)

  • 7729
    Suspension arm, upper (left or right, front or rear) (2)

  • 7829
    Suspension arms, black, upper (left or right, front or rear), heavy duty (2)

  • 7829X
    Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)

  • 7829G
    Suspension arms, green, upper (left or right, front or rear), heavy duty (2)

  • 7829T
    Suspension arms, orange, upper (left or right, front or rear), heavy duty (2)

  • 7829R
    Suspension arms, red, upper (left or right, front or rear), heavy duty (2)

  • 7743
    Suspension pin retainer (4)

  • 7743-BLUE
    Suspension pin retainer, 6061-T6 aluminum (blue-anodized) (4)

  • 7743-GRAY
    Suspension pin retainer, 6061-T6 aluminum (gray-anodized) (4)

  • 7743-GRN
    Suspension pin retainer, 6061-T6 aluminum (green-anodized) (4)

  • 7743-ORNG
    Suspension pin retainer, 6061-T6 aluminum (orange-anodized) (4)

  • 7743-RED
    Suspension pin retainer, 6061-T6 aluminum (red-anodized) (4)

  • 7740
    Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)

  • 7742
    Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)

  • 7741
    Suspension pins, 4x85mm (hardened steel) (2)

Hardware

  • 4859
    CS 3×10 flathead (hex drive)

  • 2584
    Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)

  • 4955
    Pins, axle (2.5x12mm) (4)

  • 4857
    Screw, 3×20 countersunk machine (hex drive) (6)

  • 3234
    Screws, 2.5x14mm cap-head machine (hex drive) (6)

  • 2577
    Screws, 3x10mm button-head machine (hex drive) (6)

  • 2587
    Screws, 3x10mm caphead machine (6) (no washer)

  • 2593
    Screws, 3x14mm button-head machine (hex drive) (6)

  • 2579
    Screws, 3x15mm button-head machine (hex drive) (6)

  • 2586
    Screws, 3x15mm cap-head machine (hex drive) (6)

  • 3646
    Screws, 3x15mm flat-head machine (hex drive) (6)

  • 2585
    Screws, 3x20mm cap-head machine (hex drive) (6)

  • 2581
    Screws, 3x25mm button-head machine (hex drive) (6)

  • 2575
    Screws, 3x6mm button-head machine (hex drive) (6)

  • 2576
    Screws, 3x8mm button-head machine (hex drive) (6)

  • 2535
    Screws, 4x10mm countersunk machine (hex drive) (6)

  • 3937
    Screws, 4x12mm button-head machine (hex drive) (6)

  • 3938
    Screws, 4x14mm button-head machine (hex drive) (6)

  • 2594
    Screws, 4x15mm button-head machine (hex drive) (6)

  • 2546
    Screws, 4x15mm countersunk machine (hex drive) (6)

  • 3933
    Screws, 4x16mm button-head machine (hex drive) (6)

  • 2597
    Screws, 4x22mm button-head machine (hex drive) (6)

  • 2596
    Screws, 4x25mm button-head machine (hex drive) (6)

  • 2598X
    Screws, 4x30mm button-head machine (hex drive) (6)

  • 2595
    Screws, 4x35mm button-head machine (hex drive) (6)

  • 4897X
    Screws, set (grub), 4mm (with heavy duty threadlock) (6)

  • 2743
    Set (grub) screws, 3mm hardened (12)

  • 3642X
    Shoulder screws, Ultra Shocks (3×12 hex drive) (6)

  • 5480X
    Wheel wrench, splined, 17mm

LED Lights

  • 7882
    Extension harness, LED lights (high-voltage)

  • 6590
    High-Voltage Power Amplifier

  • 7884
    LED light bar, front (high-voltage) (40 white LEDs (double row), 82mm wide) (fits Maxx®, X-Maxx®, or XRT™)

  • 7883
    LED light bar, rear, red (with white reverse light) (high-voltage) (24 red LEDs, 24 white LEDs, 100mm wide)/ light bar mount (fits Maxx®, X-Maxx®, or XRT™)

  • 7885
    LED light kit, complete (includes #6590 high-voltage power amplifier)

Motors & Electronics

  • 7749
    Adapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®)

  • 3475
    Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)

  • 7787-BLUE
    Cover, gear (blue-anodized 6061-T6 aluminum)

  • 7787-GRAY
    Cover, gear (gray-anodized 6061-T6 aluminum)

  • 7787-GRN
    Cover, gear (green-anodized 6061-T6 aluminum)

  • 7787-ORNG
    Cover, gear (orange-anodized 6061-T6 aluminum)

  • 7787-RED
    Cover, gear (red-anodized 6061-T6 aluminum)

  • 7787
    Covers, gear (3)

  • 3474
    Dual cooling fan kit (with shroud), Velineon® 1200XL motor

  • 2087X
    Gear set, metal (for 2085, 2085X servos)

  • 3362
    Heat sink, Velineon® 1200XL

  • 7760
    Motor mounts (front and rear)/ pins (2)

  • 7760-BLUE
    Motor mounts, 6061-T6 aluminum (blue-anodized) (front & rear)

  • 7760-GRAY
    Motor mounts, 6061-T6 aluminum (gray-anodized) (front & rear)

  • 7760-GRN
    Motor mounts, 6061-T6 aluminum (green-anodized) (front & rear)

  • 7760-ORNG
    Motor mounts, 6061-T6 aluminum (orange-anodized) (front & rear)

  • 7760-RED
    Motor mounts, 6061-T6 aluminum (red-anodized) (front & rear)

  • 3491
    Motor, Velineon® 1200XL, brushless

  • 3492
    Rebuild kit, Velineon® 1200XL (includes plastic endbells (2), 6x17x6mm ball bearings (2), 6x8x.3 washer (1), 6x8x1 washer (1), 7x6x12 spacer (1))

  • 2086
    Servo case/gaskets (for 2085 & 2085X servos)

  • 2085X
    Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link

  • 3496T
    Velineon® VXL-8s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)

  • 7759
    Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4)

  • 7759-GRAY
    Washers, motor mount, aluminum (gray-anodized) (4)/ 4x18mm BCS (4)

  • 7759G
    Washers, motor mount, aluminum (green-anodized) (4)/ 4x18mm BCS (4)

  • 7759-ORNG
    Washers, motor mount, aluminum (orange-anodized) (4)/ 4x18mm BCS (4)

  • 7759R
    Washers, motor mount, aluminum (red-anodized) (4)/ 4x18mm BCS (4)

Radio System, Batteries & Chargers

  • 2872X
    5000mah 11.1v 3-Cell 25C LiPo Battery

  • 2889X
    5000mah 14.8v 4-Cell 25C LiPo Battery (long)

  • 2857X
    6400mah 11.1v 3-Cell 25C LiPo Battery

  • 2890X
    6700mah 14.8v 4-Cell 25C LiPo Battery

  • 2938X
    Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports)

  • 2914
    Battery, Power Cell AA Alkaline (4)

  • 2943
    Battery charge indicators, green (4), grey (4), blue (4)

  • 6548
    Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter)

  • 2990
    Battery/charger completer pack (includes #2972 Dual iD charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo iD® Battery (2))

  • 2997
    Battery/charger completer pack (includes #2973 Dual iD charger (1), #2890X 6700mAh 14.8V 4-cell 25C LiPo iD® Battery (2))

  • 2972
    Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification

  • 2973
    Charger, EZ-Peak Live Dual, 200W, NiMH/LiPo with iD Auto Battery Identification

  • 2970
    Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification

  • 2981
    Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification

  • 6525
    Communication link, telemetry expander

  • 6565
    Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the

    6590 high-voltage power amplifier)

  • 6566
    Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the Velineon® #3465 VXL-4s, #3485 Velineon® VXL-6s, or #3496 Velineon® VXL-8s electronic speed control)

  • 2087X
    Gear set, metal (for 2085, 2085X servos)

  • 2968X
    LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)

  • 2968
    LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)

  • 6533
    Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)

  • 6552
    Seal kit, expander box (includes o-ring, seals, and silicone grease)

  • 6526
    Sensor, auto-detectable, temperature

  • 6527
    Sensor, auto-detectable, voltage

  • 6531
    Sensor, temperature & voltage (fits X-Maxx® or XRT®)

  • 6521
    Sensor, temperature and voltage (long)

  • 2086
    Servo case/gaskets (for 2085 & 2085X servos)

  • 2085X
    Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link

  • 6553X
    Telemetry Expander 2.0 and GPS module 2.0, TQi radio system

  • 6550X
    Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)

  • 6551X
    Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)

  • 6509R
    TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)

  • 6507R
    TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver)

  • 6528
    Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2-channel (transmitter only)

  • 6529
    Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 3-channel (transmitter only)

  • 6530
    Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-channel (transmitter only)

  • 6511
    Traxxas® Link Bluetooth® module

Ready-To-Race Model

77097-4
X-Maxx® Ultimate: Brushless Electric Monster Truck with TQi™ Traxxas Link™ Enabled 2.4GHz Radio System & Traxxas Stability Management (TSM)®

Rear Suspension

  • 7726
    Bulkhead tie bar, upper (1)/ lower (2) (steel)

  • 7727X
    Bulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2))

  • 7727R
    Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT®)

  • 7852-BLUE
    Carriers, stub axle (blue-anodized 6061-T6 aluminum) (left & right)

  • 7852-GRAY
    Carriers, stub axle (gray-anodized 6061-T6 aluminum) (left & right)

  • 7852-GRN
    Carriers, stub axle (green-anodized 6061-T6 aluminum) (left & right)

  • 7752X
    Carriers, stub axle (left & right) (requires 20x32x7 ball bearings)

  • 7852-ORNG
    Carriers, stub axle (orange-anodized 6061-T6 aluminum) (left & right)

  • 7852
    Carriers, stub axle (rear) (left & right)

  • 7852X
    Carriers, stub axle (rear) (left & right)/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2)

  • 7852-RED
    Carriers, stub axle (red-anodized 6061-T6 aluminum) (left & right)

  • 7716
    Mount, tie bar, front (1)/ rear (1)

  • 7738
    Shock tower, rear (left & right halves)

  • 7831
    Suspension arm, black, lower (left, front or rear), heavy duty (1)

  • 7830
    Suspension arm, black, lower (right, front or rear), heavy duty (1)

  • 7831X
    Suspension arm, blue, lower (left, front or rear), heavy duty (1)

  • 7830X
    Suspension arm, blue, lower (right, front or rear), heavy duty (1)

  • 7831G
    Suspension arm, green, lower (left, front or rear), heavy duty (1)

  • 7830G
    Suspension arm, green, lower (right, front or rear), heavy duty (1)

  • 7731
    Suspension arm, lower (left, front or rear) (1)

  • 7730
    Suspension arm, lower (right, front or rear) (1)

  • 7831T
    Suspension arm, orange, lower (left, front or rear), heavy duty (1)

  • 7830T
    Suspension arm, orange, lower (right, front or rear), heavy duty (1)

  • 7831R
    Suspension arm, red, lower (left, front or rear), heavy duty (1)

  • 7830R
    Suspension arm, red, lower (right, front or rear), heavy duty (1)

  • 7729
    Suspension arm, upper (left or right, front or rear) (2)

  • 7829
    Suspension arms, black, upper (left or right, front or rear), heavy duty (2)

  • 7829X
    Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)

  • 7829G
    Suspension arms, green, upper (left or right, front or rear), heavy duty (2)

  • 7829T
    Suspension arms, orange, upper (left or right, front or rear), heavy duty (2)

  • 7829R
    Suspension arms, red, upper (left or right, front or rear), heavy duty (2)

  • 7743
    Suspension pin retainer (4)

  • 7743-BLUE
    Suspension pin retainer, 6061-T6 aluminum (blue-anodized) (4)

  • 7743-GRAY
    Suspension pin retainer, 6061-T6 aluminum (gray-anodized) (4)

  • 7743-GRN
    Suspension pin retainer, 6061-T6 aluminum (green-anodized) (4)

  • 7743-ORNG
    Suspension pin retainer, 6061-T6 aluminum (orange-anodized) (4)

  • 7743-RED
    Suspension pin retainer, 6061-T6 aluminum (red-anodized) (4)

  • 7740
    Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)

  • 7742
    Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)

  • 7741
    Suspension pins, 4x85mm (hardened steel) (2)

Shock Oil

  • 5031
    Oil, shock (20 wt, 200 cSt, 60cc) (silicone)

  • 5032
    Oil, shock (30 wt, 350 cSt, 60cc) (silicone)

  • 5033
    Oil, shock (40 wt, 500 cSt, 60cc) (silicone)

  • 5034
    Oil, shock (50 wt, 600 cSt, 60cc) (silicone)

  • 5035
    Oil, shock (60 wt, 700 cSt, 60cc) (silicone)

  • 5036
    Oil, shock (70 wt, 900 cSt, 60cc) (silicone)

  • 5037
    Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

  • 5029
    Shock oil bottle (60cc) (for mixing shock oil)

  • 5038X
    Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)

  • 5038
    Spinning carousel rack

Shocks (GTX)

  • 7765A
    Body, GTX shock (aluminum, black-anodized) (1)

  • 7765
    Body, GTX shock (aluminum, blue-anodized) (1)

  • 7765-GRAY
    Body, GTX shock (aluminum, gray-anodized) (1)

  • 7765G
    Body, GTX shock (aluminum, green-anodized) (1)

  • 7765X
    Body, GTX shock (aluminum, hard-anodized, PTFE-coated) (1)

  • 7765T
    Body, GTX shock (aluminum, orange-anodized) (1)

  • 7765R
    Body, GTX shock (aluminum, red-anodized) (1)

  • 7762X
    Rebuild kit, GTX shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks)

  • 7763T
    Shaft, GTX shock TiN-coated (2) (assembled with rod ends and steel hollow balls)

  • 7764A
    Shock caps, aluminum (blue-anodized), GTX shocks (4)/ spacers (8)

  • 7764G
    Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers (8)

  • 7764X
    Shock caps, aluminum (hard anodized, PTFE-coated), GTX shocks (4)/ spacers (8)

  • 7764R
    Shock caps, aluminum (red-anodized), GTX shocks (4)/ spacers (8)

  • 7764
    Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5×14 CS (2) (for 2 shocks)

  • 7763
    Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (Steel, chrome finish) (2)

  • 7761A
    Shocks, GTX, aluminum (black-anodized) (fully assembled w/o springs) (2)

  • 7761
    Shocks, GTX, aluminum, blue-anodized (fully assembled w/o springs) (2)

  • 7761-GRAY
    Shocks, GTX, aluminum, gray-anodized (fully assembled w/o springs) (2)

  • 7761G
    Shocks, GTX, aluminum, green-anodized (fully assembled w/o springs) (2)

  • 7761T
    Shocks, GTX, aluminum, orange-anodized (fully assembled w/o springs) (2)

  • 7761R
    Shocks, GTX, aluminum, red-anodized (fully assembled w/o springs) (2)

  • 7767
    Spring retainer (adjuster), blue-anodized aluminum, GTX shocks (4) (assembled with o-ring)

  • 7767-GRAY
    Spring retainer (adjuster), gray-anodized aluminum, GTX shocks (4) (assembled with o-ring)

  • 7767G
    Spring retainer (adjuster), green-anodized aluminum, GTX shocks (4) (assembled with o-ring)

  • 7767-ORNG
    Spring retainer (adjuster), orange-anodized aluminum, GTX shocks (4) (assembled with o-ring)

  • 7767X
    Spring retainer (adjuster), PTFE-coated aluminum, GTX shocks (4) (assembled with o-ring)

  • 7767R
    Spring retainer (adjuster), red-anodized aluminum, GTX shocks (4) (assembled with o-ring)

  • 7853
    Springs, shock (natural finish) (GTX) (0.824 rate, white stripe) (2)

  • 7854
    Springs, shock (natural finish) (GTX) (0.929 rate, orange stripe) (2)

  • 7766
    Springs, shock (natural finish) (GTX) (1.055 rate) (2)

  • 7855
    Springs, shock (natural finish) (GTX) (1.199 rate, green stripe) (2)

  • 7856
    Springs, shock (natural finish) (GTX) (1.346 rate, blue stripe) (2)

  • 7857
    Springs, shock (natural finish) (GTX) (1.450 rate, black stripe) (2)

  • 7858
    Springs, shock (natural finish) (GTX) (1.538 rate, red stripe) (2)

Spur Gears & Pinion Gears

  • 6484X
    Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6485X
    Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6486X
    Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6488X
    Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6487X
    Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6489X
    Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6490X
    Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6491R
    Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6494X
    Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6494R
    Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

  • 6495X
    Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6496X
    Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

  • 6442
    Spur gear, 46-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)

  • 6447R
    Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

  • 6443
    Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)

  • 6448R
    Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

  • 6444
    Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)

  • 6449X
    Spur gear, 54-tooth, steel (1.0 metric pitch)

  • 6449R
    Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

Steering Components

  • 5119
    Ball bearings, blue rubber sealed (10x15x4mm) (2)

  • 5116
    Ball bearings, blue rubber sealed (5x11x4mm) (2)

  • 7879-BLUE
    Drag link, 6061-T6 aluminum (blue-anodized)

  • 7879-GRAY
    Drag link, 6061-T6 aluminum (gray-anodized)

  • 7879-GRN
    Drag link, 6061-T6 aluminum (green-anodized)

  • 7879-ORNG
    Drag link, 6061-T6 aluminum (orange-anodized)

  • 7879-RED
    Drag link, 6061-T6 aluminum (red-anodized)

  • 7747-BLUE
    Servo horn, steering, 6061-T6 aluminum (blue-anodized)

  • 7747-GRAY
    Servo horn, steering, 6061-T6 aluminum (gray-anodized)

  • 7747-GRN
    Servo horn, steering, 6061-T6 aluminum (green-anodized)

  • 7747-ORNG
    Servo horn, steering, 6061-T6 aluminum (orange-anodized)

  • 7747-RED
    Servo horn, steering, 6061-T6 aluminum (red-anodized)

  • 7747
    Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)

  • 7746-BLUE
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, blue-anodized) (fits X-Maxx®)

  • 7746-GRAY
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, gray-anodized) (fits X-Maxx®)

  • 7746-GRN
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, green- anodized) (fits X-Maxx®)

  • 7746-ORNG
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, orange- anodized) (fits X-Maxx®)

  • 7746-RED
    Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, red-anodized) (fits X-Maxx®)

  • 7746
    Steering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

  • 7746X
    Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

  • 7748
    Toe links, molded composite, 173mm (158mm center to center) (black) (2)

  • 7748X
    Toe links, X-Maxx® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748-GRAY
    Toe links, X-Maxx® (TUBES gray-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748G
    Toe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748-ORNG
    Toe links, X-Maxx® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748R
    Toe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

Suspension Linkage

  • 7798
    Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)

  • 7797
    Rod ends (4) (assembled with steel pivot balls) (replacement ends for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X)

  • 7743
    Suspension pin retainer (4)

  • 7743-BLUE
    Suspension pin retainer, 6061-T6 aluminum (blue-anodized) (4)

  • 7743-GRAY
    Suspension pin retainer, 6061-T6 aluminum (gray-anodized) (4)

  • 7743-GRN
    Suspension pin retainer, 6061-T6 aluminum (green-anodized) (4)

  • 7743-ORNG
    Suspension pin retainer, 6061-T6 aluminum (orange-anodized) (4)

  • 7743-RED
    Suspension pin retainer, 6061-T6 aluminum (red-anodized) (4)

  • 7740
    Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)

  • 7742
    Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)

  • 7741
    Suspension pins, 4x85mm (hardened steel) (2)

  • 7748
    Toe links, molded composite, 173mm (158mm center to center) (black) (2)

  • 7748X
    Toe links, X-Maxx® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748-GRAY
    Toe links, X-Maxx® (TUBES gray-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748G
    Toe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748-ORNG
    Toe links, X-Maxx® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748R
    Toe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

Team Traxxas Items

  • 9916
    Backpack, RC car carrier, 12″ x 12″ x 24″ (fits TRX-4 & similar)

  • 2514
    Decal sheet, racing sponsors

  • 9917
    Duffel bag, medium, 30″ x 12″ x 12″ (fits 1/10 Slash®, TRX-4®, & similar)

  • 9950
    Official Team Traxxas® racing decal set(flag logo/ 6-color)

  • 9909
    Traxxas® racing banner, red & black (3×7 feet)

Tires & Wheels

  • 7772A
    Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Maxx® AT tires, foam inserts) (left & right) (2)

  • 7774A
    Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Sledgehammer® tires, foam inserts) (left & right) (2)

  • 7871X
    Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Sledgehammer® belted tires, foam inserts) (left & right)

  • 7772X
    Tires & wheels, assembled, glued (X-Maxx® black wheels, Maxx® AT tires, foam inserts) (left & right) (2)

  • 7773
    Tires & wheels, assembled, glued (X-Maxx® black wheels, paddle tires, foam inserts) (left & right) (2)

  • 7871
    Tires & wheels, assembled, glued (X-Maxx® black wheels, Sledgehammer® belted tires, foam inserts) (left & right)

  • 7772G
    Tires & wheels, assembled, glued (X-Maxx® green wheels, Maxx® AT tires, foam inserts) (left & right) (2)

  • 7774G
    Tires & wheels, assembled, glued (X-Maxx® green wheels, Sledgehammer® tires, foam inserts) (left & right) (2)

  • 7772T
    Tires & wheels, assembled, glued (X-Maxx® orange wheels, Maxx® AT tires, foam inserts) (left & right) (2)

  • 7774T
    Tires & wheels, assembled, glued (X-Maxx® orange wheels, Sledgehammer® tires, foam inserts) (left & right) (2)

  • 7772R
    Tires & wheels, assembled, glued (X-Maxx® satin chrome wheels, Maxx® AT tires, foam inserts) (left & right) (2)

  • 7872
    Tires & wheels, assembled, glued (XRT® Race black wheels, Gravix™ tires, foam inserts) (left & right)

  • 7875
    Tires & wheels, assembled, glued (XRT® Race black wheels, Maxx® AT tires, foam inserts) (left & right)

  • 7876
    Tires & wheels, assembled, glued (XRT® Race black wheels, Sledgehammer® tires, foam inserts) (left & right)

  • 7873
    Tires, Gravix™ (left & right)/ foam inserts (2)

  • 7770X
    Tires, Maxx® AT (left & right) (2)/ foam inserts (2)

  • 7870
    Tires, Sledgehammer® (belted) (left & right)/ foam inserts (2)

  • 7757
    Wheel hex clips (6)

  • 7756
    Wheel hubs, hex (2)/ hex clips (2)

  • 7756X
    Wheel hubs, hex, aluminum (blue-anodized) (4)

  • 7756-GRAY
    Wheel hubs, hex, aluminum (gray-anodized) (4)

  • 7756G
    Wheel hubs, hex, aluminum (green-anodized) (4)

  • 7756-ORNG
    Wheel hubs, hex, aluminum (orange-anodized) (4)

  • 7756R
    Wheel hubs, hex, aluminum (red-anodized) (4)

  • 7758A
    Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

  • 7758
    Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)

  • 7758-GRAY
    Wheel nuts, splined, 17mm, serrated (gray-anodized) (4)

  • 7758G
    Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

  • 7758T
    Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)

  • 7758R
    Wheel nuts, splined, 17mm, serrated (red-anodized) (4)

  • 5480X
    Wheel wrench, splined, 17mm

  • 7771
    Wheels, X-Maxx®, black (left and right)

  • 7874
    Wheels, XRT® Race, black (left and right)

Transmission Components

  • 7796
    Center drive, torque biasing (assembled)/ 17x26x5 ball bearings (2) (requires

    7727X bulkheads)

  • 7787-BLUE
    Cover, gear (blue-anodized 6061-T6 aluminum)

  • 7787-GRAY
    Cover, gear (gray-anodized 6061-T6 aluminum)

  • 7787-GRN
    Cover, gear (green-anodized 6061-T6 aluminum)

  • 7787-ORNG
    Cover, gear (orange-anodized 6061-T6 aluminum)

  • 7787-RED
    Cover, gear (red-anodized 6061-T6 aluminum)

  • 7787
    Covers, gear (3)

  • 7785X
    Input gear, transmission, 20-tooth/ 2.5x12mm pin

  • 7786X
    Input shaft, transmission (cush drive)

  • 5040
    Oil, differential (20M wt) (standard)

  • 7784X
    Output gear, 51-tooth, metal (requires #7785X input gear)

Traxxas Tools

  • 3433X
    Body reamer (aluminum handle)

  • 3433
    Body reamer (plastic handle)

  • 3436
    Cap, body reamer

  • 3432
    Scissors, curved tip

  • 3431
    Scissors, straight tip

  • 8712
    Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive

  • 8720
    Speed bit handle, large (overmolded)

  • 8721
    Speed bit handle, medium (one piece)

  • 8722
    Speed bit handle, premium (rubber overmold)

  • 8710
    Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball-end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm,  8.0mm), 1/4” drive

  • 8711
    Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4″ drive

  • 8719
    Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4″ drive

  • 8716
    Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4″ drive

  • 8716X
    Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4″ drive

  • 8715
    Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4″ drive

  • 8715X
    Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4″ drive

  • 8714
    Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4″ drive

  • 2748R
    Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench)

  • 3415
    Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)

  • 5480X
    Wheel wrench, splined, 17mm

Turnbuckles & Threaded Rods

  • 7798
    Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)

  • 7797
    Rod ends (4) (assembled with steel pivot balls) (replacement ends for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X)

  • 7748
    Toe links, molded composite, 173mm (158mm center to center) (black) (2)

  • 7748X
    Toe links, X-Maxx® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748-GRAY
    Toe links, X-Maxx® (TUBES gray-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748G
    Toe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748-ORNG
    Toe links, X-Maxx® (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

  • 7748R
    Toe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)

WideMaxx® Suspension Kit

  • 7896
    Driveshaft, steel constant velocity (shaft only, 190.3mm) (1) (for use with

    7895 X-Maxx® WideMaxx® suspension kit)

  • 7894
    Suspension arm, lower, black (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7893
    Suspension arm, lower, black (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7894X
    Suspension arm, lower, blue (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7893X
    Suspension arm, lower, blue (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7894G
    Suspension arm, lower, green (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7893G
    Suspension arm, lower, green (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7894T
    Suspension arm, lower, orange (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7893T
    Suspension arm, lower, orange (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7894R
    Suspension arm, lower, red (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7893R
    Suspension arm, lower, red (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7892
    Suspension arms, upper, black (left or right, front or rear) (2) (for use with

    7895 X-Maxx® WideMaxx® suspension kit)

  • 7892X
    Suspension arms, upper, blue (left or right, front or rear) (2) (for use with

    7895 X-Maxx® WideMaxx® suspension kit)

  • 7892G
    Suspension arms, upper, green (left or right, front or rear) (2) (for use with

    7895 X-Maxx® WideMaxx® suspension kit)

  • 7892T
    Suspension arms, upper, orange (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7892R
    Suspension arms, upper, red (left or right, front or rear) (2) (for use with

    7895 X-Maxx® WideMaxx® suspension kit)

  • 7895
    Suspension kit, X-Maxx® WideMaxx®, black (includes front & rear suspension arms, front toe links, driveshafts, shock springs)

  • 7895X
    Suspension kit, X-Maxx® WideMaxx®, blue (includes front & rear suspension arms, front toe links, driveshafts, shock springs)

  • 7895G
    Suspension kit, X-Maxx® WideMaxx®, green (includes front & rear suspension arms, front toe links, driveshafts, shock springs)

  • 7895T
    Suspension kit, X-Maxx® WideMaxx®, orange (includes front & rear suspension arms, front toe links, driveshafts, shock springs)

  • 7895R
    Suspension kit, X-Maxx® WideMaxx®, red (includes front & rear suspension arms, front toe links, driveshafts, shock springs)

  • 7897
    Toe links, 202.5mm (187.5mm center to center) (black) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7897A
    Toe links, front (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

  • 7897X
    Toe links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895X X-Maxx® WideMaxx® suspension kit)

  • 7897G
    Toe links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895G X-Maxx® WideMaxx® suspension kit)

  • 7897R

  • Toe links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895R X-Maxx® WideMaxx® suspension kit)

If you have questions or need technical assistance, call Traxxas at:

FAQ

Question: How do I troubleshoot motor issues?
Answer: Check all motor connections and wiring for any loose connections or damage. Ensure the motor is receiving a proper power supply and that it is not overheating during operation.

Question: What should I do if my vehicle drifts to one side?
Answer: Check the alignment of the front suspension components and steering linkage. Adjust as needed to ensure both sides are balanced for straight-line driving.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals