TRITUS-TX Submersible Pump with Grinder Owner’s Manual
- August 16, 2024
- TRITUS
Table of Contents
TRITUS-TX Submersible Pump with Grinder
Specifications
- Product Name: TRITUS-TX Submersible Pump with Grinder
- Application: Sewage, Domestic Use
- Voltage: 230 V
- Amperage: 2.8 A
- Power Cable Length: 5 m
- Float Switch: Included
Product Usage Instructions
Installation
The TRITUS-TX grinder pump is designed for cutting through solids and
fibers in domestic wastewater and sewage. Follow these steps for installation:
- Ensure the power cable and float switch are properly connected.
- Place the pump in the desired location with at least 220 mm of clearance from the pit wall.
- Secure the pump in place to avoid movement during operation.
Operation
To operate the TRITUS-TX pump:
- Turn on the power supply.
- The integrated magnetic float switch will activate the pump when needed.
- Monitor the pump’s performance and ensure proper functioning.
Maintenance
Regular maintenance is essential for optimal performance. Follow these
maintenance tips:
- Clean the pump and remove any debris regularly.
- Check the float switch for proper operation.
- Inspect the blades and motor components for wear and tear.
INSTALLATION AND USE
The TRITUS-TX grinder pump is equipped with a robust, hardened stainless steel blade, expertly designed to cut through solids and fibers found in domestic wastewater and sewage. It includes a compact, integrated magnetic float switch with a vertical sliding mechanism. This innovative design ensures utmost electrical safety while facilitating operation in confined spaces, requiring as little as 220 mm of clearance from the pit wall.
INCLUDES
- 5 m power cable
- float switch
APPLICATION LIMITS
- Depth below water level up to 5 m (with an appropriately sized power cable)
- Liquid temperature up to +40 °C
- Bottom drainage level up to 85 mm
AVAILABLE UPON REQUEST
- Power cable length 10 m
- Different voltage requirements 60 Hz frequency
PATENTS – TRADE MARKS – MODELS
- TRITUS® Registered Trade mark No. 013017181
CURVES AND PERFORMANCE DATA
- 50 Hz
TYPE
Single- phase
| POWER (P2)| Q| m³/h| 0| 0.6| 1.2| 1.8| 2.4| 3.6| 4.8| 5.4
---|---|---|---|---|---|---|---|---|---|---|---
kW| HP| l/min| 0| 10| 20| 30| 40| 60|
80| 90
TRITUS- TX| 0.55| 0.75| H metres| 12.0| 11.5| 10.5| 9.6| 8.6|
6.2| 3.0| 1.0
ABSORPTION
TYPE
Single- phase
| VOLTAGE
230 V
---|---
TRITUS-TX| 2.8 A
MATERIALS AND COMPONENTS
DIMENSIONS AND WEIGHT
TYPE
Single- phase
| PORT
DN
| DIMENSIONS mm| kg
1~
---|---|---|---
a| b| c| f| h1| h| d| e| g (adjustable)| t| p| **
TRITUS-TX| 1¼”| **
88
| ****
117
| ****
118
| ****
205
| ****
76
| ****
324
| ****
35
| ****
100
| ****
80 or 100
| ****
251
| ****
350
| ****
220
| ****
7.0
- Q = Flow rate
- H = Total manometric head
Performance curves comply with EN ISO 9906 Grade 3B tolerance limits.
FAQ
- Q: What are the application limits of the TRITUS-TX pump?
- A: The application limits depend on the power cable size used with the pump. Please refer to the appropriate power cable specifications for more information.
- Q: What materials are used in the construction of the TRITUS-TX pump?
- A: The pump components are made of various materials including technopolymer, stainless steel, NorylTM, ceramic, graphite, and NBR. Refer to the user manual for a detailed list of materials used in each component.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>