V-TAC VT-7984 Hanging Light Installation Guide
- August 15, 2024
- V TAC
Table of Contents
V-TAC VT-7984 Hanging Light
Product Information
Specifications
- Model: VT-7984
- SKU: 23374
- Watts: 40W
- Lumens: 4800 LM
- Beam Angle: Not specified
- Material: Metal
- Base Size: D180 mm
- Dimensions: D600xH1160 mm
- Input Power: AC220-240V, 50/60Hz
- Additional Features: Not Dimmable, Replaceable control gear by a professional, Replaceable (LED only) light source by a professional
Product Usage Instructions
Installation
- Ensure the power supply is switched off before starting the installation process.
- Identify a suitable location to hang the LED Designer Hanging Light.
- Use appropriate tools to securely mount the base of the light fixture to the ceiling.
- Connect the power supply to the light fixture following the provided wiring instructions.
Replacement of Light Source
- If the LED light source needs replacement, contact a professional to ensure safe and correct installation.
- Only replace the LED light source with a compatible one recommended for this model.
Maintenance
- Clean the light fixture regularly with a soft, dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive materials that may damage the finish of the light fixture.
TECHNICAL DATA
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor Use only
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
Symbol
INSTALLATION DIAGRAM
- Switch off the power before starting the installation.
- Use screws to fix the mounting bar to the junction box.
- Make the wire connections with connectors.
- Connect the live wire (L) from fitting to the live wire from the main power supply.
- Connect the neutral wire (N) from the fitting to the neutral wire from main power supply.
- Connect the earth wire from the fitting to the earth wire from the main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring connections.
- Use screws to fix the canopy to the mounting bar.
- Check if the installation is completed and turn on the power.
Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.
FAQ
Q: Is the beam angle adjustable on the LED Designer Hanging Light?
A: The beam angle is not specified for this model, indicating that it is
likely fixed and not adjustable.
Q: Can I use dimmable bulbs with this hanging light?
A: No, this model is not dimmable. It is recommended to use non-dimmable bulbs
for optimal performance and safety.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>