Morgan MGS-8812G Gas Stove User Manual

: August 14, 2024
: Morgan

Table of Contents

Morgan MGS-8812G Gas Stove
Product Usage Instructions
Before First Use:

Morgan MGS-8812G Gas Stove

Specifications:

Product: Gas Stove
Model No.: MGS-8812G
Gas Category: I3B/P(30)
Gas Type: Butane (G30), Propane (G31) or their mixtures
Gas Pressure: 3000Pa
Total Heat Input Qn: 7.2kW
Burner Size: Left: 115mm, Right: 115mm
Consumption kW (g/h): Left: 3.6kW, Right: 3.6kW
Countries of Destination: Malaysia (MY)
Country of Origin: Made in China
Manufacturer: DKSH Malaysia Sdn. Bhd.
Address: B-11-01 The Ascent Paradigm, No.1 Jalan SS7/26A Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia

Product Usage Instructions

Before First Use:

Ensure the gas stove is placed on a flat, stable surface in a well-ventilated area.
Check all parts for any damage or missing components.
Read the user manual carefully to understand the installation and operation procedures.

Operating Instructions:

To turn on the gas cooker, push the gas control knob and then turn it clockwise to the desired flame level.
To turn off the gas cooker, turn the gas control knob counterclockwise until it clicks off.
Adjust the flame controller to regulate the flame intensity.

Care & Cleaning:

Wait for the gas stove to cool down before cleaning.
Clean the drip pan, burner trivet, and gas control knob with a mild detergent and water solution.
Rinse and dry thoroughly with a dry cloth before using again.

Troubleshooting:

Problem: Ignition Failed Possible Causes:
A. The gas valve is not opened.
B. The rubber hose is bent.
C. No gas in the cylinder.
D. The nozzle or the burner is obstructed.
E. There is air in the hose.
F. The knob is turned too fast.
Solutions:
Follow the corresponding solutions provided in the manual.
Other Problems
A. Gas leakage from the gas pipe
B. The rubber hose is broken
C. There is no flame.
Follow the corresponding solutions provided in the manual.
Abnormal Combustion
A. Pressure is too low or too high.
Adjust the valve or replace the gas cylinder as needed.

FAQ:

Q: How do I know if my gas stove is compatible with Butane or Propane gas?
A: Check the gas type specifications provided in your user manual or on the product label.
Q: Can I use my gas stove indoors?
A: Yes, you can use the gas stove indoors, but ensure proper ventilation to prevent any gas buildup.

Thank you for purchasing a quality MORGAN appliance. We trust that you will have apleasant experience with your new product. To guarantee safety and best efficiency, please read this manual carefully and keep a copy for future reference

IMPORTANT SAFEGUARDS

Read all instructions in the User Manual carefully before using the appliance to find all the required instructions to ensure safe installation, operation, and maintenance. Always retain this User Manual close for future reference.
After removing the packaging, inspect the appliance for any damage. Do not operate the appliance should you have any doubts and contact the nearest Service Center.
Never leave the packaging components (plastic bags, foamed polystyrene, screws, and etc.) within the reach of children since these pose a danger of suffocation and other risks.
This appliance should preferably be installed by a qualified person in compliance with the instructions provided. The manufacturer declines all responsibility for improper installation which may pose a hazard or risk.
Persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge shall be under supervision and instructed concerning use of the appliance in a safe way and understand the hazards involved when using the appliance. Keep the appliance away from children.
This appliance is intended for domestic use only, and not for commercial and industrial use.
Do not use for outdoor purpose.
The appliance is strictly for cooking only.
Avoid placing any inflammable materials over the burner to prevent the risk of fire.
It is recommended to use a pan size at least 120mm.
Operate this appliance only in a well-ventilated room but not facing strong wind.
Do not leave the appliance and the stopcock of the gas cylinder on after every use.
In the event of an abnormal combustion during use, turn off the appliance and the gas cylinder stopcock immediately. Refer to the troubleshooting section of this manual for solutions.
CAUTION: Avoid touching the burner, trivet, and plate while in use or immediately after used as they can get very hot.
If gas leakage happens, turn off the stopcock of the gas cylinder. Open all the windows and call for service repair. Do not switch on any electrical appliance or ignite inflammable items.
Never operate the appliance unless it is fully and securely assembled.
Always place the appliance on flat surface when operating.
Do not move the appliance when it is operating.
Close supervision is necessary when any appliances is used by or near children

PARTS IDENTIFICATION

SPECIFICATIONS

Product Gas Stove
Model No. MGS-8812G
Gas Category I3B/P(30)
Gas Type Butane (G30), Propane (G31) or their mixtures
Gas Pressure 3000Pa
Total Heat Input ΣQn: 7.2kW
Burner Size Left: 115mm Right: 115mm
Consumption kW (g/h) Left: 3.6kW Right: 3.6kW
Countries of Destination Malaysia (MY) Country of Origin Made in China
Manufacture to Import by DKSH Malaysia Sdn. Bhd. (4476-U) B-11-01 The Ascent Paradigm, No.1 Jalan SS7/26A Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia.

This appliance must be installed in accordance with the regulations in force and only used in a well ventilated space. Read the instructions before installing or using this appliance. Forbid to place on the surface of combustible objects.

BEFORE FIRST USE

Read this instructions manual carefully before using and keep it for future reference.
Use only the approved gas hose only. (Figure 1)
This appliance uses Liquefied Petroleum Gas (LPG). Make sure you have the correct type of gas supply for use with this appliance.
Do not operate the appliance near to a sink, bath tub or shower or etc., whereby it can be easily exposed to water.
Before using for the first time, remove any protective film or stickers from the appliance.
Use only Low-Pressure Regulator for the appliance

OPERATING INSTRUCTIONS

OPERATING THE GAS COOKER

TURNING ON THE GAS COOKER

Turn on the gas cylinder stopcock. Push the ignition knob and turn it counter-clockwise until a “Click” sound is heard. Make sure the burner has been lit up.
In some cases, the burner cannot be ignited especially when the appliance has been left unused for a considerable period. This is caused by air remnants trapped in the rubber hose.
Repeat turning the ignition knob a few times until gas comes through. Re-igniting the Burner
When using the appliance again immediately after having once turned off, wait for about ten seconds before re-igniting it.

TURNING OFF THE GAS COOKER
Turn the ignition knob to its original position without pressing it. Always to turn off the cylinder stopcock completely after every use.

FLAME CONTROLLER
Push and turn the knob counter-clockwise to ON position. Control the flame and position it according to your cooking requirements.

POSITIONING THE APPLIANCE
Place the appliance away from the wall and ceiling as shown in the figure below.

CARE & CLEANING

The ignition will not function if the burner is wet. Ensure water, soup, or other liquids are not spilled onto the burner.
Inspect the gas hose regularly for any cracks or leakage.
Ensure there are no inflammable liquids or particles placed near the appliance.
Do not apply excessive pressure to the burner control knob.
Wipe the top plate and body with dry cloth. Clean hard-to-reach areas with soapy water and dry thoroughly with dry cloth.
Burn marks left on the burner head is normal after frequent use