baridi DH224 Mini Portable Tabletop Dishwasher Instructions

: August 16, 2024
: baridi

Table of Contents

barite DH224 Mini Portable Tabletop Dishwasher
Specifications
OVERVIEW
PARTS LIST
INSTALLATION
OPERATION
FUNCTIONS
CLEANING & MAINTENANCE
TROUBLESHOOTING
TROUBLESHOOTING TABLE
CONTACT
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

barite DH224 Mini Portable Tabletop Dishwasher

Specifications

Model No : DH224
5 Wash Functions: Standard, Quick, Strong, ECO, Fruit

Important Information
Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.

ELECTRICAL SAFETY

WARNING! It is the user’s responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before use. Inspect power supply leads, plugs, and all electrical connections for wear and damage. Dellonda recommends that an RCD (Residual Current Device) is used with all electrical products.
Electrical safety information. The following information must be read and understood:
Ensure that the insulation on all cables and the appliance is safe before connecting it to the power supply.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
IMPORTANT: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse.
DO NOT pull or carry the appliance by the power cable.
DO NOT pull the plug from the socket by the cable.
DO NOT use worn or damaged cables, plugs, or connectors. Ensure that any faulty item is repaired or replaced immediately by a qualified electrician.
If the cable or plug is damaged during use, switch off the electricity supply and remove it from use.
Ensure that repairs are carried out by a qualified electrician.
GENERAL SAFETY
WARNING! When using the countertop dishwasher, follow the precautions listed below.
This appliance is intended to be used in households and similar applications such as:
- staff kitchen areas in shops, offices, and other working environments;
- farmhouses;
- by clients in hotels, motels, and other residential-type environments;
- bed and breakfast type environments.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision. Packaging material could be dangerous for children!
This appliance is for indoor household use only.
To protect against the risk of electrical shock, do not immerse the unit, or power cord, or plug in the water or any other liquid.
Please unplug before cleaning and performing maintenance on the appliance.
Use a soft cloth moistened with mild soap, and then use a dry cloth to wipe it again.
DO NOT abuse, sit on, or stand on the door or dish rack of the dishwasher.
DO NOT open the door when the machine is washing or drying.
DO NOT operate your dishwasher unless all enclosure panels are properly in place.
When loading items to be washed:
- Locate sharp items so that they are not likely to damage the door seal;
- WARNING! Knives and other utensils with sharp points must be loaded in the basket with their points facing down or placed in a horizontal position.
Check that the detergent powder compartment is empty after completion of the wash cycle.
DO NOT wash plastic items unless they are marked “dishwasher safe” or the equivalent.
For plastic items, check the manufacturer’s recommendations.
Use only detergent and rinse agents recommended for use in an automatic dishwasher.
Never use soap, laundry detergent, or hand-washing detergent in your dishwasher.
The door should not be left open, since this could increase the risk of tripping.
If the supply cable is damaged, it must be replaced by the manufacturer its service agent, or a similarly qualified person to avoid a hazard.
During installation, the power supply cable must not be excessively or dangerously bent or flattened.
DO NOT tamper with the controls.
The appliance needs to be connected to the main water supply using new hose-sets. Old sets should not be reused.
The maximum number of place settings to be washed is 4.
The maximum permissible inlet water pressure is 1 MPa.
The minimum permissible inlet water pressure is 0.04MPa.
DO NOT place the machine outside or in cold conditions under 0°C.
Use salt and detergent which is designed for dishwashers
Ensure the machine is positioned in a stable. dry, non-slip environment.
DO NOT place and use the machine within 150mm of a gas stove or other heating source.
DO NOT splash water onto the machine.
DO NOT block the side air outlet.
DO NOT tilt or move the machine when washing.
Check and clean the machine regularly to maintain the best performance.
Fix the drain hose to avoid leakages.
DO NOT forcibly pull the power cord, drain hose, or press the cutlery tray to avoid any damage.
DO NOT use the machine when your hands are wet to avoid electric shock.
Keep chemical materials such as salt and detergent out of reach of children.

OVERVIEW

PARTS LIST

Dry
Tank Icon
Tap Icon
Display Screen
Time Display
Dry Indicator
Temperature
Door Open
Program: Standard
Program: Quick
Program: ECO
Program: Strong
Program: Fruit
Program Option
Start/Pause
Power On/Off

INSTALLATION

INLET HOSE INSTALLATION
Connect Machine. Insert the inlet hose elbow into the water inlet at the rear of the machine and tighten the screw.
Connect Tap. Use options A, B, or C as shown below.
DRAIN HOSE INSTALLATION
Connect Machine. Insert the drain hose elbow into the water outlet behind the machine and tighten the collar.
Connect Sewer. Use options A, B, or C as shown below.

TABLEWARE LOADING

Remove large food residue from tableware before loading the machine.
To fully clean the tableware, please tilt the tableware internally or put the stained face down.

CLEANING PROGRAM: ECO

Under the ECO washing Program, add a detergent tablet, then start washing. When 18 minutes are left before the washing finishes, pause washing, open the door, and add 2ml rinse aid, then close the door to continue the washing till the program has finished.

OPERATION

Refer to the control panel diagram below.

Dry
Tank Icon
Tap Icon
Display Screen
Time Display
Dry Indicator
Temperature
Door Open
Program: Standard
Program: Quick
Program: ECO
Program: Strong
Program: Fruit
Program Option
Start/Pause
Power On/Off

POWER ON/OFF

Plug in the machine. Touch “POWER” to turn on.
During the washing program running, touch “POWER” for 3 seconds to force the machine to turn off.

ADD DETERGENT

Open the door, and add moderate detergent powder, or 1 detergent tablet into the machine.
Close the door.
DO NOT use detergent when using the ‘fruit washing’ setting.

PROGRAM SELECTION

Touch the program icon you wish to use.

RUN PROGRAM

Touch “START/PAUSE” to run the selected program.
The machine will check the water supply automatically.

NOTES

If the “TAP” or “TANK” indicators turn red, you need to open the tap or fill the tank with water.
The machine will automatically go into standby mode if there is no water supply.
Touch “START/PAUSE” to pause the machine to add tableware during washing.
Touch “POWER” for 3 seconds to end the program. The machine will drain.
Touch “DRY” to add 73 minutes of air circulation. Only use this setting if placing wet dishes in the dishwasher.

WASH

The machine has two water supply modes – tap and tank.
If the tank is full, the machine will switch into tank mode automatically;
Fill 3 cups of water into the tank. The machine will sound an alarm if the tank is full, and the “TANK” symbol will become white.

FUNCTIONS

CLEANING & MAINTENANCE

FILTER CLEANING

Disassemble. Rotate anticlockwise to disassemble the filter set, which includes three parts – filter mesh, main filter, and fine filter.
Clean. Use water to flush and brush each of the filter parts.
Assemble. After cleaning, rotated clockwise to close the filter set.

SPRAY-ARMS CLEANING

Disassemble. Open the door, take out the basket, and then pull out the top and bottom spray arms.
Clean. Use water to flush and brush each spray arm. Use suitable tools to clean if needed.
Assemble. After cleaning, turn each arm to ensure they can move smoothly.

TROUBLESHOOTING

FAULT CODES

TROUBLESHOOTING TABLE

Environment Protection, Waste Electrical and Waste Electronic Equipment Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has reached the end of its useful life, please dispose of it in an environmentally friendly way. Drain any fluids (if applicable) into approved containers, by local waste regulations. Please note that this product contains one or more batteries. It is our policy to continually improve products and we reserve the right to alter data, specifications, and parts without prior notice. No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim.

Dellonda Limited, the Sole UK Distributor of Baridi
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

CONTACT

PHONE: 01284 757575
EMAIL: support@dellonda.co.uk
WEBB: www.dellonda.co.uk

FAQ

Problem: Tableware is not clean.
Cause: Incorrect tableware loading, spray arm trapped, blocked spray arm, blocked filter, incorrect filter installation, incorrect program selection, no detergent, water shortage, door not fully closed.
Solution: Ensure proper tableware loading, clean the spray arm, and filter, select the correct program, add detergent, and check the water level and door closure.