BLACKSMITH DL0101 Smart Door Lock Instruction Manual

BLACKSMITH DL0101 Smart Door Lock

Product Specifications

• Product Name: Smart Lock Manual Electronic Keypad Deadbolt Lock
• Door Frame Thickness: 110mm
• Door Thickness Range: 38-55mm
• Backset Options: 60mm (2.4in) or 70mm (2.8in)
• Batteries: 4 x AA Alkaline batteries

Product Usage Instructions

Door Preparation

1.  Check door thickness and Door Frame: Door frame should be 110mm and door thickness should be between 38-55mm.
2.  Check door open direction: Determine if your door opens to the left or right from the outside.

Packing List
Verify that you have all components including the outdoor unit, mounting plate, indoor unit, deadbolt, screws, mechanical key, strike plate, and latch holding plastic box.

Installation Diagram
Follow the installation template to drill holes for the components.

Installation Steps

Step 1: Drill Holes

• Check the required backset (60mm or 70mm).
• Align the template along the vertical center line of the deadbolt at the desired height and mark the holes before drilling.
• Step 2: Install Deadbolt
  •  Ensure the UP mark is facing upwards before inserting the deadbolt into the hole.
• Step 3: Install Outdoor Unit
  • Cylindrical sleeve bolt is optional if your door doesn’t have a hole for it.
  • Adjust the backset to either 60mm or 70mm according to the door hole.
• Step 4: Install Mounting Plate
  • Keep the spindle vertical and ensure the cable goes underneath the deadbolt.
• Step 5: Install Indoor Unit
  • Set the switch to ‘L’ or ‘R’ based on your door’s open direction.
  • Insert 4 x AA Alkaline batteries and check knob orientation.
• Step 6: Mark and Drill Holes for Strike
  • Use the sucker to remove the cover and test the lock by rotating the knob and using the mechanical key.

FAQ

• Q: What should I do if I get locked out?
  A: If using the Lock with the # key or Auto-Lock features, make sure to have your smartphone, passcode, or standard key with you to prevent locking yourself out.

• Q: How do I change the backset from 60mm to 70mm?
  A: Twist the body 180 degrees to adjust from 60mm to 70mm position.

Smart Lock Manual
Electronic Keypad Deadbolt Lock

Note:

1. This lock is equipped with mechanical keys for manual unlocking. Remove mechanical keys from the package and keep them in a safe place and always have access to them.
2. To power on the lock, four AA alkaline batteries (not included) are required. Non-alkaline and rechargeable batteries ARE NOT RECOMMENDED.
3. This lock is used outdoors and indoors, it is designed to be exposed to direct sunlight or rain. The waterproof rating: IP45
4. The operation of setting lock has a stand-by time limit of 8 seconds; Without any activity, lock’s keyboard will shut after 8 seconds.
5. Keep your fingers clean when using this lock.
   Please read this manual before operating your Smart Lock, and keep it for further reference.

Door Preparation

1. Check door thickness and Door Frame.
   • Door frame≧ (110mm)
   • Door thickness: (38-55mm)
2. Check door open direction.

Packing List

• A) Outdoor unit * 1
• B) Mounting plate * 1
• C) Indoor unit * 1
• D) Deadbolt * 1
• E) M4 x 25mm cross flat head self-tapping screw * 4
• F) Cylindrical sleeve bolt * 1
• G) M4 x 30mm cross flat head screw * 3
• H) M4 x 22mm cross flat head screw * 1
• I) M4 x 10mm cross flat head screw * 2
• J) Mechanical key * 2
• K) Strike plate * 1
• L) Latch holding plastic box * 1

Installation Diagram

Step 1
Drill holes according to the installation template

Note:

1. Check the required backset (60mm or 70mm).
2. Align the template along the vertical center line of the deadbolt(D) at the desired height,and tape it to the door.
3. Mark the holes first, then start drilling.

Step 2
Install the deadbolt (D)

• Check that the UP mark is facing upwards before inserting the deadbolt into the hole.

Note: To change deadbolt from 60mm to 70mm, twist the body 180o to the 70mm position

• Step 3 Install outdoor unit (A)
  Cylindrical sleeve bolt(F) is not a must if your door doesn’t have a hole for it.

• Step 4 Install mounting plate (B)
  This screw is not a must if your door doesn’t have a hole for it.

• The cable goes through the notch on the lower right part of the mounting plate.

• Step 5 Install indoor unit (C)

• Note : Please notice the direction of the Knob, as shown below.

• For Left-open door:
  The knob should be HORIZONTAL.

• For Right-open door:
  The knob should be VERTICAL.

• Step 6 Install 4 x AA Alkaline batteries

• Test the lock by rotating the knob on indoor unit (C) and using mechanical key.

• Step 7 Mark and drill holes for strike

Product Profile

Specifications|
---|---
Material| Zinc Alloy| Model NO.| S110DBL-F
Door thickness| 38mm-55mm| Code Length| 6~9 digits
Working Temperature| -20°C~70°C| Working Humidity| 20%~80%RH
Working Power Consumption| ＜200mA| Static Power Consumption| ＜30uA
Power Supply| 6V (4pcs AA Alkaline Batteries not included)
Unlocking Methods| Fingerprint, App, Card, Passcode & Mechanical Key
User Capacity| 1 App Administrator
Unlimited App eKey users
150 passcode users, 100 card users, 50 fingerprint users
Product Dimension| Outdoor unit: 64 x 145 x 18 mm| Indoor unit: 67 x 164 x 30 mm

Features

• Lock’s Administrator: After pairing the lock with TTLock App on your phone, your phone becomes the administrator of the lock.
• Bluetooth Key: After pairing the lock, turn on Bluetooth on your phone, open TTLock App, unlock the lock via your phone. (The phone should be within 10 meters from the door lock)
• Remote Authorization eKey: The administrator can instantly and remotely send the eKey to other people’s mobile App, can also limit the use time of the eKey, and instantly freeze, unfreeze and delete the eKey.
• Authorized Remote Passcode: Administrator can from anywhere remotely send permanent and time-limited passwords to others.
• Keyboard Locked: After 6 failed passcode attempts, the keypad will shut down for 3 minutes.
• Mechanical Key and App Unlock can be used to unlock in this state.
• Randomizer: Before you enter your passcode, you can push some random numbers to prevent the passcode from being inferred based on the fingerprints on the frequently pushed numbers and from being seen by anyone nearby.
• Auto Lock: After unlocking, the lock can lock automatically after a period of time (can be 5s, 10s, 30s, 60s or custom seconds, the time can be set via the smart phone App)
• Lock with # key: Press and hold the # key on the keyboard for 2 seconds to lock.
• Low Power Consumption: 4 x AA alkaline batteries can be unlocked about 5000 times (more than 6 months).
• Low Power Alarm: When the battery power is low, the lock will emit an alarm sound. The App interface will display the real-time power level. When the battery is dead, you can use a backup battery connect by USB cable or a mechanical key to temporarily unlock the lock.
• Real Time Record: You can check unlock records in real time on your App.
• Privacy Lock out Mode: It essentially is a ‘do not disturb’ mode, privacy button is below the knob of back panel, this will make the lock no longer accept passcode, card or fingerprint access except for mechanical key and App Unlock.
  1. Press the privacy button for about 3 seconds and activate the privacy lock out mode.
  2. To deactivate the privacy lock out mode, please short press the privacy button once or turn the knob once, then passcode / card / fingerprint can work again.

App Operation Guide

1. App Installation and Registration

2.  Search and download the “TTLock” App from Google play store or Apple store on your phone.

3. You can also scan the QR code to download the App.
   Install and register an account with your phone number or email.
   Note :
   If you have already registered an account, just log in with this account.

4. App Connection

5. Turn on the Bluetooth on your phone.

6. Open the App. Then click icon and click “All Locks”.

7. Touch the touch screen of the lock to activate keyboard.

8. Find the lock’s name which starts with “xx_xxx” and click “+”. 2.5. Rename the name of lock if necessary and click “OK”.

Note:

• If you can not see the “+” sign when pairing the lock, follow the steps below to reset the lock: Remove one of batteries to power off the lock for about 5 seconds, put the battery back and keep pressing the reset button (right below the knob on the back panel) for about 10 seconds, when hearing the voice prompt, pls input “0000#”. Remember that your phone must be connected to the internet (3G / 4G / Wifi) when pairing.
• Once you pair the lock with your account, the device will not be able to link to other accounts, unless you remove the lock from your App.

 App Operation Instruction

eKeys

• eKey is a function for you to authorize the Admin rights to other people, who has down-load TTLock App and register an TTLock account on his/her phone. People who holds can control the smart lock.

• Passcodes
  The passcode can be set as different type: Permanent / Timed / One-time(6 hours) /Erase(24 hours) / Customized / Recurring. You can send the passcodes to those in need by mail or chatting tools. The receiver can unlock the lock by entering the passcode manually. (Enter the passcode and then press the # key to unlock.)

•  Cards: To add and delete cards on the App, place the card on the sensor area of the lock’s keyboard when adding. You can add card with the types of Permanent / Timed / Recurring. 

• Fingerprints: To add and delete fingerprints on the App, place the finger on the sensor area of the lock when adding. You can add fingerprint with the types of Permanent / Tim- ed / Recurring.

•  Authorized Admin: Authorize admin to the user as an Admin user to operate the lock.

•  Records: View locking and unlocking information to check when and who used it.

Settings

• Basics: Display the Lock Number, MAC/ID, Battery lever, Lock Name (You can change the name of the lock), Lock Group (The administrator can add multiple locks for grouping, which is suitable for rental housing. It is more convenient for group management of personnel), Admin Passcode (It is the unlock passcode of the administrator, which can be manually changed to a custom passcode).
• Unlocking Notification: On-by-default. If this function is on, the administrator’s phone will receive the unlocking information when someone who assigned with a key unlocks the door with the App.
• Lock Sound: On-by-default. By turning off, you will not hear the sound from the lock, such as the sound when pressing number keys on lock’s keyboard.
• Firmware Upgrade: To check whether there is any update version.
• Import from another lock: You can import valid eKeys, passcodes, cards from another lock which is on your TTLock App.
• Diagnosis: Analyse the problem of the lock.
• Lock Clock: Calibrate time of the lock.
• Auto Lock: Off-by-default. Open the App-click Setting, click Auto Lock-turn on and set time to 10S, 15S, 30S, 60S or Custom seconds you need, then click OK. When the setup is completed, it will be automatically locked after unlocking (for example, it will be automatically locked 10 seconds after unlocking if the time is set as 10 seconds).

System Settings

1. Sound: On-by-default, you can manually close it to turn off the sound of App unlock operation.
2. Touch to Unlock: Off-by-default, this function is invalid when the “TTLock” App is closed or running on the background of your phone. When the App is opened and connect within 10 meters from the lock, any family members can unlock the door by pressing any button on lock’s keyboard for at least 2 seconds. It is recommended to close the option if you do not need it
3. Lock Users: You can check your lock users here.
4. Lock Group: The administrator can add multiple locks for grouping, which is suitable for rental housing. It is more convenient for achieving group management of personnel. It can be modified or deleted if not needed.
5.  Transfer locks: This function is used to transfer the administrator rights. Once transferred, you will not the administrator again.
6. Transfer gateway: This function is used to transfer the gateway. Once transferred, you will lose the right for managing the gateway.
7. Languages: App system language setting.
8. Screen Lock: After the function is turned on, you need to use your fingerprint or password to open the the lock App. No need to verify again within 3 minutes.

Operation Instructions

1. Unlock
2. Via App: Open the App and click the icon ® (The phone should be within 5 meters from the lock.) on the interface to unlock.

Operation Instructions

1. Unlock
2. Via App : Open the App and click the icon on the interface to unlock. (The phone should be within 5 meters from the lock.)
3. Via Passcode: Enter the passcode and then press “#” to confirm the unlocking.
4. Via Card: Place the IC card on the middle of the lock’s keyboard to unlock.
5. Via Fingerprint: Place the finger on the fingerprint sensor area of the lock to unlock.
6. Via Mechanical Key: Use a sucker to remove the cover of keyhole which is on the front panel, then insert the key to unlock.
7. Unlock in the Room: Manually twist the knob on the back panel to unlock.
8. Lock
9. Via App : Open the App, press and hold the lock icon  for 2 seconds to lock. (The phone should be within 5 meters from the door lock.)
10. Auto Lock: Click the icon on the interface of the lock and enter “Settings”, then click “Auto Lock” to set the auto lock time, the lock will be locked automatically according to the set time after vou unlock the lock.
11. Via the # key: Press and hold the # key on the lock’s keyboard for 2 seconds to lock.
12. Via Mechanical Key: Use a sucker to remove the cap of keyhole which is on the front panel, then insert the key to lock.
13. Lock in the Room: Manually twist the knob on the Back panel to lock.
14. Remote Authorization of eKey
    Open the App – enter the interface of the lock – click eKey – click Send eKey – select the eKey type as “Timed” / “Permanent” / “One-time” / “Recurring” – Enter the App account of the recipient – click Send.

Switch Administrator

1. Delete the Administrator right
   Open the App- enter the interface of the lock – click Settings – click Delete – enter your App account password – click OK. (The phone should be within 5 meters away from the lock.) Then, the lock can be added by a new phone installed App. A lock can only be paired with one App account.

2. Switch through the Transfer locks function.
   Open the App – click App’s Settings – click Transfer Locks – Select Locks – click Next – enter the recipient’s App account and the verification code – click Next – Finish. (The phone should be within 5 meters from the lock ).

3. Freeze / Delete / Authorize / Name / Operate Already Sent eKeys by Administrator
   Open the App – enter the interface of the lock – click eKeys – click the eKey that has been sent – click Name / valitidity / delete the eKey info you need – clicking the menu on the upper right corner to conduct the freeze / authorize operation.

4. Remote Authorization of Passcode

   • Open the App – enter the interface of the lock – click Passcodes – click Generate Passcode
   •  select the type of the passcode (Permanent / Timed / One-time / Custom / Recurring) -click Generate.
   • Then it will create a passcode. You can send the code to others by SMS, email or other chatting tools.

5. Delete already Sent Passcode by Administrator
   Open the App – enter the interface of the lock – click Passcodes – select the passcode that has been sent – delete the passcode. (The phone is required to be connected to Wifi or mobile data network and near the lock).

6. Reset the Lock
   The lock can be reset by below two methods.
   Method 1: Reset on TTLock App (The phone needs to be near the lock.) Enter the interface of the lock which you want to reset on App – click Settings
   click Delete – enter your App account password – OK

Method 2: Reset on the lock

• Remove one of batteries.
• Put the battery back, press and hold the reset button for about 10 seconds.
• When hearing the voice prompts “Please input the initialization passcode”, release your finger from reset button and input “0000#”.

FAQ

1. How can I reset my TTLock App account if I forgot my password?

2. A: Open the TTLock App, click Forgot password, enter the email address or phone umber you registered for your TTLock account.

3. Enter a new password, check Get code. You should receive verification code by email or phone message, enter the verification code to reset your password. Use the new password to sign in the account.

4. Q: Can I still use the smart lock when my phone is lost or turn off?

5. Yes. You can still use the mechanical key / password / IC card to lock / unlock the door.

6. Use a new phone to download the App, sign in your App account with the email or phone number and password. Enter the verification code, then you can use the new phone to unlock the door.

7. Q: The door won’t lock automatically when I close it.

8. A: Check if Auto Lock is set. If not, press and hold the # key on the panel keypad for about 2 seconds to lock the door.

9. If the door doesn’t lock automatically when Auto Lock is set, then the lock has been installed incorrectly.

10. The Auto Lock function is not activated when the batteries are completely discharged. Check if the batteries are discharged.

11. Q: Lock configuration failed.

12. A: Remove the mechanical key from the cylinder.

13. Check that the door was closed properly or if lock operation was interfered

14. Q: The App is disconnected from the door unit and / or I can’t find my lock on the App.

15. A: Close the App, turn off the phone’s Bluetooth. Then turn Bluetooth back on, and open the App.

16. Refresh the App.

17. The lock can only be connected to one user’s App. It’s possible that another user’s phone App is already connected to the lock. If don’t know which user is connected to it, you have to reset the lock.

18. Q: The smart lock has started beeping whenever I lock or unlock the door.
    A: This is an indication your battery is low; it’s time to change the batteries.

19. Q: I’m unable to open the door from a distance of 10 meters / yards

20. A: The app works via a Bluetooth connection, which can be impacted by the environment.

21. For both security and functionality reasons, try moving as close as possible to the lock.

22. The battery is low, use the emergency power supply for the door.

23. Q: Can the lock be set to automatically lock after close?
    A: Yes. You can preset the locking time after 5~900 seconds of close on the App.

24. Q: How long will the battery last?
    A: It depends on the frequency of usage. 4 x AA batteries can normally be used for 6 months (about 5,000 unlocking).

25. Q: Can I check the record of unlocking time and fingerprint on this App?
    A: Yes. “TTLock” App shows all operating record including who and when to open the door.

26. Q: Is it easy to install? Have installation video?
    A: Yes. We provide a detailed installation video. If you follow the steps, you can complete setup in 30 minutes.

27. Q: Can this lock be exposed to direct sunlight?
    A: Yes. But it is not recommended to do so, as long-term exposure to sun will shorten the lifespan of electronic products.

28. Q: Can I share a temporary code with my guest or friend?
    A: Yes. More than 150 different codes (temporary/permanent/one-time/cycle) are available in case of a sudden visit. Custom code only can be set when your phone closes to the lock. You also can set “empty” code to delete all previous codes once you enter it.

29. Q: How many fingerprints can be set? And how about IC cards?
    A: This lock can be set 50 fingerprints and 100 IC cards.

30. Q: Can I cancel voice prompts?
    A: Yes. You can set or cancel it on App.

31. Q: How far should I be from the door to unlock it with Bluetooth App?
    A: Within 5-10 meters

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>