Mr BLACKSMITH 9117482 22 Ton Heavy Duty Jack Stands with Locking Pin Owner’s Manual

: May 15, 2024
: MR BLACKSMITH

Table of Contents

SAFETY & WARNING INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

22 Ton Heavy Duty Jack Stands with
Locking Pin
Owner’s Manual

Model No.| Capacity| Base Size| Min. Height| Max Height
---|---|---|---|---
9117482| 22 Ton| 9-7/8” x 9-7/8”| 13-5/16”| 19-5/8”

SAFETY & WARNING INFORMATION

This is the safety notification symbol. This symbol will notify you of any potential injury hazards. Please follow all instructions that follow this symbol to avoid possible injuries or death.
WARNING Indicates a hazardous situation. If proper steps are not followed, death or serious injury could result.
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE
Before using these jack stands, be sure to read all content within this manual, ensuring that you understand the operating procedures, maintenance requirements and all safety warnings.
The owner and/or operator shall have an understanding of the product, its operating characteristics, and safety operating instructions before operating this device. Safety information shall be emphasized and understood. If the operator is not fluent in English, the product and safety instructions shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner or his designee, making sure that the operator comprehends their contents.
WARNING Actions to help prevent dangerous situations

Study, understand and follow all instructions before operating this device.
Do not exceed the rated capacity stated.
Use only on hard, level surfaces.
Lift only on areas of the vehicle as specified by the vehicle manufacturer.
No alterations shall be made to this product.
Jack Stands are designed to support stated capacity. Stands should only be used to support partial loads that consist of one end of a vehicle. Always use as a matched pair to support one end of a vehicle only.
Never use jack stands to support both ends or one side of a vehicle.
Use only one (1) pair of stands per vehicle.
Rated capacity is per pair only.
Failure to heed these warnings may result in serious personal injury and/or property damage.

Inspection

This device shall be inspected immediately if the device is believed to have been subjected to an abnormal load or shock. It is recommended that this inspection be made by a manufacturer’s or supplier’s authorized repair facility.
Owners and/or operators should be aware that repair of this equipment may require specialized knowledge and facilities. It is recommended that an annual inspection of the product be made by a manufacturer’s or supplier’s authorized repair facility and that any defective parts, decals, or safety labels or signs be replaced with manufacturer’s or supplier’s specified parts.

Damaged Equipment and add-ons
Any jack stand that appears to be damaged, is found to be worn or operates abnormally in any way will be removed from service and destroyed immediately.
Alterations
Because of potential hazards associated with this type of equipment, no alterations shall be made to the product.
Attachments and Adapters
Only attachments and/or adapters supplied by the manufacturer shall be used.
Setup

Prior to each use, visual inspection (See Pg.2 ) shall be made to the device by checking for abnormal conditions, such as cracked welds, damaged, loose or missing parts.
Consult the vehicle owner’s manual to determine the location of support points.
Be sure to set the vehicle in park with the emergency brake on and wheels securely chocked.
Be sure that the vehicle and the jack stands are on a hard, level surface.

Assembly

Insert extension column into base collar.

Operation
Supporting a Load

Properly chock the vehicle wheels.
Lift the extension column up to desired position, insert support rod through the column adjustment holes. Ensure the support rod is properly and fully engaged in the column holes and securely rested on the collar.
Slowly and carefully lower the vehicle onto the saddle. Be sure the load is centered on the saddle.
Ensure vehicle is secure and stable before working on, around or under.

Lowering Load

Using a suitable jack, lift vehicle clear of stands.
Disengage support pin from the extension column holes and carefully lower the column down to the lowest position. Place support pin into holder.
Remove stands. Follow procedures of jack operation to lower vehicle.

Maintenance

Inspect each stand before use. Ensure all parts move freely. If rust appears, sand away the rust area and cover with appropriate utility paint.

Mr BLACKSMITH 9117482 22 Ton Heavy Duty Jack Stands with Locking Pin -
Holder