John Adams JAD11052 Make A Bear Toy User Guide

June 3, 2024
John Adams

Adams JAD11052 User Guide

JAD11052 Make A Bear Toy

Make your very own Teddy Bear to love & cuddle!
The tricky sewing part of the bear has already been done!
There is a little felt heart for you to sew and put inside her body, add all the stuffing then simply sew her up at the back. She has her very own cute little dress to wear and you  can sew on the patch pocket, flower buttons and flowers to decorate her ear.
Have fun filling in her birth certificate and love her always!

What’s in the box?

John Adams JAD11052 Make A Bear Toy - Figure 1

THREADING THE NEEDLE

  • Cut of a length of thread about 40cm long.
  • Thread one end through the eye of the needle and pull through about 10cm (a).
  • Always tie a big double knot at the end.

SEWING & STUFFING THE FELT HEART

  • To make the heart use running stitch as shown (b).
  • Fold the heart in half and begin sewing it together with the yellow thread until you get nearly all the way around (c).
  • Add some stuffing (d) then sew the remaining stitches.
  • Finish by sewing the last stitch twice and then trim of any extra thread with scissors.
    John Adams JAD11052 Make A Bear Toy - Figure 4

STUFFING THE BEAR

  • Take small pieces of the stufing material and push them inside the skin (e).
  • Start with the feet, legs, arms; then finally her tummy and back. Use up all of the stufing.
  • A metal teaspoon might help you push the stufing right into the feet and legs.
  • Your bear is now ready for her heart to be put inside before you sew her up!
    John Adams JAD11052 Make A Bear Toy - Figure 6

SEWING THE BEAR

  • To sew the back of the bear you will use over-stitch as shown below.
  • Thread your needle with 40cm of the beige thread and knot the end.
  • To join the two seams bring them closely together so there are no gaps, you will sew each pair of holes twice.
  • From the inside, thread the needle through the bottom hole (f ).
  • Over-stitch through the opposite hole (g), stitch through the same holes again to create your 2nd stitch.
  • Continue up through the next set of holes (h) all the way up the back of the bear, keeping the stitches as neat as you can.

John Adams JAD11052 Make A Bear Toy - Figure 5

NOTE: The holes in the back of the bear are already made for you

John Adams JAD11052 Make A Bear Toy - Figure 7

WARNING! Not suitable for children under 36 months. Choking hazard – contains small parts. Strangulation hazard – long cords.
Adult supervision recommended.
Read the instructions before use, follow them and keep them for reference.
©2021 John Adams Leisure Ltd. John Adams Leisure Ltd. is constantly endeavouring to improve quality standards and therefore colours, sizes and contents may sometimes vary from those shown.
Packaging and leaflets printed on recycled paper wherever possible.
John Adams Leisure Ltd., Hercules House, Pierson Road, Enterprise Campus, Alconbury Weald, Huntingdon, Cambridgeshire. PE28 4YA, England.
EU authorised representative: John Adams Leisure EU Ltd., 1 Castlewood Avenue, Rathmines, Dublin 6, D06 H685, Ireland.
For customer services call 01480 414361 or email [email protected]
Please retain this information for future reference. MADE IN CHINA.
To see more of our range visit www.johnadams.co.uk
11052_01_MAKE A BEAR_INS_PRT01_25/02/21

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

John Adams User Manuals

Related Manuals