EXPOLITE 518572 TourLED 28 MKIII Outdoor LED Spotlight User Manual

: June 4, 2024
: EXPOLITE

Table of Contents

EXPOLITE 518572 TourLED 28 MKIII Outdoor LED Spotlight
Specifications
Dimensions
INSTALLATION
- MOUNTING
Display Panel operation
Using DMX512
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EXPOLITE 518572 TourLED 28 MKIII Outdoor LED Spotlight

Specifications

Art.No.: led28426
Voltage: 100V – 240V AC 50/60Hz
Power consumption: 128W
Dimensions: 334 x 191 x 236 mm
Weight: 6.6 kg
Connectors: Power In/Out | DMX In/Out
Temperature: -20°C – 45°C
Humidity*: < 80%
IP rated: IP 65
Housing: Die-cast aluminum, black
LEDs: 7 x 20W 4in1 RGBW
Angle: 8°- 40°
Control: Stand-Alone / Master-Slave / DMX512
DMX-Channels: 3 – 25 (3/4/5/6/7/12/17/25)

Dimensions

INSTALLATION

MOUNTING

HANGING
The fixture can be mounted in a hanging position using the supporting bracket. The bracket should be secured to the mounting truss or structure using a standard mounting clamp. Please note that when hanging the unit a safety cable should also be used.

UPRIGHT
The fixture can be mounted in an upright or sitting position using the supporting brackets.

POWER CONNECTIONS

@220V: 12 units may be connected in series
@110V: 6 units may be connected in series

Note: If the signal cable is over 60m between the DMX512 controller and fixture or between two fixtures, then a DMX signal amplifier is needed as well.

Display Panel operation

Display operation

MENU: Back
ENTER: Enter or Save
UP: Up
DOWN: Down

Menu map

Edit static color
In the Menu „STAT“ values of each function for Stand-Alone operation can be set. Set and combine the range (0-255) for Red, Green, Blue, White an Zoom for 0-100%, also Strobe for 0-20Hz.

Activate auto programs
In the Menu, „AUTO“ pre-programmed programs can be activated. The programs „AT01″ to „AT10″ can not be edited. The programs „PR01″ to „PR10″ are editable. For further explanation see „Edit custom programs“ Auto programs will be sent to connected devices. For the Master-Slave operation, Signals will be sent via DMX-Cable. This may cause disturbance on other devices.

Run mode
In the Menu „Run“ the Run mode will be set.. For operation with a DMX- controller select „DMX“. For use as Slave select „SLAV“. In Slave-mode the unit recives static color or auto-program from the master unit.

Set DMX-Adress
Set the DMX-Adress of the unit in the „DMX“ menu.

Personality
In the Menu „PERS“ the DMX-Personality will be set. Choose and select the personality.

Benutzerprogramme editieren
In the Manu „EDIT“ custom auto programs „PR01″ to „PR10″ can be edited. Each program has 30 steps that can be edited. Each step contains the values for RGBW, Zoom, Strobe (0-20Hz), step-time and fade-time. Custom programs can be uploaded from a master device. See „special settings“

Special settings

„KEY“: enables(ON) or disables(OFF) automatic lock-out with password protection. Password to re-enter is „UP“-“DOWN“-“UP“-“DOWN“-“ENTER“ and can`t be changed.
„UPLD“: Select to upload custom programs from a master device. Run-mode needs to be set to „SLAVE“
„REST“: Triggers factory-reset.
COLO“: In the Menu Color the color calibration can be selected or deactivated. If „RGBW“ is selected the maximum DMX-value (255) will be limited to the stored value in „CAL2″. If „UC“ (Uniform-Color) is selected the factory calibration will be used. RGBW output is balanced to different generations of units. If „OFF“ is selected the calibration is disabled. RGBW reaches maximum power without limit by calibration.
DIM“: Different dimming speeds can be selected from fast (DIM1) to slow (DIM4). DIM4 acts as halogen simulation.
„DERR“: Select reaktion of losing DMX signal. Select „SAVE“ to keep the last recived signal or „BLAK“ to change to blackout.
SLCK“: Enable or disable password protection for „SET“-menu. If „ON“ is slected the user needs to enter the password (UP+DOWN+UP+DOWN) to enter the „SET“-menu. „OFF“ disables password protection.
„ZOOM“: Calibrates the position of POS1 and POS2. Set position to 0 for the smallest position. „BASE“ calibrates to default zoom position.
„CURV“: In the Curve menu different dimming curves,as shown below, can be selected.

Calibration and white balance

Password „UP“-“DOWN“-“UP“-“DOWN“

CAL1″ select WH.01 to WH.1 to calibrate the pre-programmed white colors. RGBW is used to mix pre-programmed colors.
„CAL2″ adjusts the output when the DMX-controller sends 255 on RGBW.
„CALR“ sets all calibrations to factory default.

Zoom range
In the menu „ZOOM“ the limit of the zoom channel can be edited. If using a DMX controller you are only able to access to the range between „POS1″ and „POS2″.

Using DMX512

CHANNEL ASSIGNMENT

This unit has different DMX Personalities with different amounts of DMX channels. 10 DMX-Personalities with 3, 4, 5, 6, 7, 12, 17 und 25 channels are available.

TOUR

TR16

1|

0<=>255

|

MASTER DIMMER

|
---|---|---|---

2

|

0<=>255

|

MASTER DIMMER FINE

3

|

0<=>255

|

RED

4

|

0<=>255

|

RED FINE

5

|

0<=>255

|

GREEN

6|

0<=>255

|

GREEN FINE

7

|

0<=>255

|

BLUE

8

|

0<=>255

|

BLUE FINE

9|

0<=>255

|

WHITE

10

|

0<=>255

|

WHITE FINE

11

|

0<=>10

| COLOR MACRO

NO FUNCTION

11<=>30| RED100%/GREEN UP/BLUED%
31<=>50| RED DOWN/GREEN 100%/BLUE0¾
51<=>70| RED 0%/GREEN 100%/BLUE UP
71<=>90| RED 0%/GREEN DOWN/BLUE 100%
91<=>110| RED UP/GREEN 0%/BLUE100%
111<=>130| RED100%/GREEN 0%/BLU EDOWN
131<=>150| RED100%/GREEN UP/BLUE UP
151<=>170| RED DOWN/GREEN DOWN/BLUE 100%
171<=>200| RED100%/GREEN 100%P/BLUE100%/WHITE 100
201<=>205| WHITE1: 3200K
206<=>210| WHITE2: 3400K
211<=>215| WHITE3: 4200K
216<=>220| WHITE4: 4900K
221<=>225| WHITES: 5600K
226<=>230| WHITE6: 5900K
231<=>235| WHITE 7: 6500K
236<=>240| WHITE 8: 7200K
241<=>245| WHITE 9: 8000K
246<=>250| WHITE 10: 8500K
251<=>255| WHITE 11: 10000K
CHANNEL| VALUE| FUNCTION
---|---|---

12

|

0<=>9

| STROBE

NO FUNCTION

10<=>255| 1-20Hz

13

|

0 <=> 40

| AUTO

NO FUNCTION

41<=> so| AUTO 1
51<=> 60| AUTO2
61<=> 70| AUT03
71<=> 80| AUT04
81<=> 90| AUTOS
91<=> 100| AUT06
101<=> 110| AUT07
111<=> 120| AUTOS
121<=> 130| AUT09
131<=> 140| AUTO 10
141<=> 150| PR.01
151<=> 160| PR.02
161<=> 170| PR.03
171<=> 180| PR.04
181<=> 190| PR.OS
191<=> 200| PR.06
201<=> 210| PR.07
211<=> 220| PR.08
221<=> 230| PR.09
231<=> 255| PR.10

14

|

0<=>255

| AUTO SPEED ADJUSTMENT

When using CH13,AUT001-AUT010, this function activate

15

|

0<=>9

| DIMMER SPEED

PRESET DIMMER SPEED FROM DISPLAY MENU

17

| 000 <=>200

201 <=>220

221 <=>255

| NO FUNCTION ZOOM RESET NO FUNCTION

ARC.1

CHANNEL	VALUE	FUNCTION
1	__

0<=>255

| __

RED

2| __

0<=>255

| __

GREEN

3| __

0<=>255

| __

BLUE

| |

AR1.D

CHANNEL	VALUE	FUNCTION
1	__

0<=>255

| __

MASTER DIMMER

2| __

0<=>255

| __

RED

3| __

0<=>255

| __

GREEN

4| __

0<=>255

| __

BLUE

ARC.2

CHANNEL	VALUE	FUNCTION
1	__

0<=>255

| __

RED

2| __

0<=>255

| __

GREEN

3| __

0<=>255

| __

BLUE

4| __

0<=>255

| __

WHITE

AR2.D

CHANNEL	VALUE	FUNCTION
1	__

0<:=:>255

| __

MASTER DIMMER

2| __

0<:=:>255

| __

RED

3| 0<:=:>255| GREEN
4| __

0<:=:>255

| __

BLUE

5| 0<=>255| WHITE

AR2.S

CHANNEL	VALUE	FUNCTION
1	__

0<:=:>255

| __

MASTER DIMMER

2| __

0<:=:>255

| __

RED

3| __

0<:=:>255

| __

GREEN

4| __

0<:=:>255

| __

BLUE

5| __

0<:=:>255

| __

WHITE

6| __

0<:=:>255

| __

STROBE

| |

HSV

CHANNEL	VALUE	FUNCTION
1	__

0<:=:>255

| __

HUE(0-100%)

2| __

0<:=:>255

| __

SATURATION(0-100%)

3| __

0<:=:>255

| __

VALUE(0-100%)

| |

AR2.Z

CHANNEL	VALUE	FUNCTION
1	__

0<:=>255

| __

MASTER DIMMER

2| __

0<:=>255

| __

RED

3| 0<=>255| __

GREEN

4| 0<:=>255| __

BLUE

5| __

0<:=>255

| __

WHITE

6| __

0<:=>255

| __

ZOOM

__

7

| 000<=>200

201 <=>220

| NO FUNCTION

ZOOM RESET

| 221 <=>255| NO FUNCTION

FULL

CHANNEL	VALUE	FUNCTION

__

1

| __

0 <=>255

| __

MASTER DIMMER

2| __

0 <=>255

| MASTER DIMMER FINE
3| 0 <=>255| RED1
4| 0 <=>255| RED FINE1
5| 0 <=>255| GREEN1
6| 0 <=>255| GREEN FINE1
7| 0 <=>255| BLUE1
8| 0 <=>255| BLUE FINE1
9| 0 <=>255| WHITE1
10| 0 <=>255| WHITE FINE1
11| 0 <=>255| RED2
12| 0 <=>255| RED FINE2
13| 0 <=>255| GREEN2
14| 0 <=>255| GREEN FINE2
15| 0 <=>255| BLUE2
16| 0 <=>255| BLUE FINE2
17| 0 <=>255| WHITE2
18| 0 <=>255| WHITE FINE2
__

__

19

| __

0 <=>10

| __

NO FUNCTION

11 <=>30| RED100%/GREEN UP/BLUED%
31 <=>SO| RED DOWN/GREEN 100%/BLUE0O/o
51 <=>70| RED 0%/GREEN 100%/BLUE UP
71 <=>90| RED 0%/GREEN DOWN/BLUE 100%
91 <=>110| RED UP/GREEN 0%/BLUE100%
111 <=> 130| RED100%/GREEN 0%/BLU EDOWN
131 <=> 150| RED100%/GREEN UP/BLUE UP
151 <=> 170| RED DOWN/GREEN DOWN/BLUE100%
171 <=>200| RED100%/GREEN 100%P/BLUE100%/WHITE100%
201 <=> 205| WHITE!: 3200K
206 <=>210| WHITE2: 3400K
CHANNEL| VALUE| FUNCTION
---|---|---
__

__

19

20

| __

__

O<:=:> 9

| STROBE

NO FUNCTION

10<:=:> 255| 1-20Hz
__

__

21

| __

__

0<:=:>40

| AUTO

NO FUNCTION

41 <:=:> 50| AUTO 1
51 <:=:> 60| AUT02
61 <:=:> 70| AUT03
71<:=:> 80| AUT04
81<:=:> 90| AUTOS
91 <:=:> 100| AUT06
101 < :=:> 110| AUT07
111<:=:> 120| AUTOS
121 < :=:> 130| AUT09
131<:=:> 140| AUTO 10
141 <:=:> 150| PR.01
151 <:=:> 160| PR.02
161<:=:> 170| PR.03
171<:=:> 180| PR.04
181 <:=:> 190| PR.OS
191<:=:> 200| PR.06
201<:=:> 210| PR . 07
211 <:=:> 220| PR.OS
221<:=:> 230| PR.09
231 <:=:> 255| PR . 10
__