TIEWEI TW9 Smart Watch Instructions
- August 14, 2024
- TIEWEI
Table of Contents
TIEWEI TW9 Smart Watch
Product Information
Specifications
- Product: Smart Watch
- FCC Compliance: Part 15 of FCC Rules
- RF Exposure: General RF exposure requirement met
- Usage: Portable exposure condition without restriction
Product Usage Instructions
FCC Warning
This smartwatch complies with part 15 of the FCC Rules. When using the
device, please ensure the following:
- This device must not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
Important Notes
Any changes or modifications not approved by the responsible party could
void the user’s authority to operate the equipment. Please follow these
guidelines:
- Reorient or relocate the receiving antenna if needed.
- Increase the separation between the equipment and receiver to avoid interference.
- Plug the equipment into an outlet on a different circuit from the receiver.
- If you need assistance, consult the dealer or an experienced radio/TV technician.
The device can be used in portable exposure conditions without any restrictions. Enjoy using your smartwatch responsibly and safely!
FAQ
-
Q: Can I wear the smartwatch while swimming?
A: This smartwatch is not designed for swimming or submersion in water. Avoid exposing it to water to prevent damage. -
Q: How do I charge the smartwatch?
A: Use the provided charging cable and connect it to a power source. Follow the manufacturer’s instructions for proper charging. -
Q: Can I customize the watch face?
A: Yes, most smartwatches allow you to customize the watch face. Refer to the user manual for instructions on how to change the watch face.
SMART WATCH
INSTRUCTIONS
[Packing list)
Watch host (including strap), charging line, product manual
[App download and connection)
- Scan QR code, download and install “HryFine ” APP
- App connection method:
- After the watch is turned on, slide the right side bar of the dial page, click settings, and slide to the bottom of the setting interface. Click to view the Bluetooth address.
- Open the Bluetooth of the mobile phone, enter the app and click Add device. After the search is completed, click the device to be connected to bind
- Connect audio Bluetooth: draw on the dial page and click the Bluetooth icon. When it is turned on, the Bluetooth icon will appear blue. Enter the mobile phone Bluetooth system and search the corresponding Bluetooth name of the bracelet for binding (after the connection is successful, the Bluetooth icon in the notification bar will be color).
Function introduction
Dial up: connect the mobile phone and dial out with Bluetooth, and you can
call at the watch end.
Contact: you can add a contact in the app. After the contact is successfully
added, the watch phone book will be displayed synchronously. Click the contact
in the phone book to make a call (Note: the watch needs to be connected to the
mobile phone Bluetooth)
Call record: the call record at the watch end can be displayed. Click the
phone number to dial.
Information: message push content can be displayed, such as SMS, QQ, wechat,
etc. (SMS reminder will be blocked by default in systems above ios12).
Sports: 1 Enter the sports mode (running, walking, cycling, mountain climbing,
indoor running) selection interface, and click again to start the
corresponding sports mode data monitoring: sports time, distance, calories
consumed and heart rate data 2. Record: record all motion data
Pedometer: count the step counting data of the day. Click left to view the
step number record, clear the data at 00:00 a.m., or view it on app. App can
set the step number of a day to reach the standard value. When the set step
number is reached, the watch will be prompted to meet the standard
Sleep monitoring: enable sleep detection to monitor sleep quality during
sleep, and view sleep duration, rapid eye movement, deep sleep, light sleep
and other data
Sedentary reminder: set the sedentary time. When the time comes, the watch
will have a vibration reminder, and the interface will have a prompt icon
Heart rate: stick the watch close to the wrist and the best wearing position
is above the wrist bone and arm. The real-time heart rate value can be
measured. The normal value of ordinary people is 60-100 times / min. slide
left to view the heart rate record
Blood pressure: stick the watch close to the wrist. The best wearing position
is above the wrist bone and arm. You can measure the real-time blood pressure.
Adult diastolic blood pressure: 60 ~ 80 (mmHg) adult systolic blood pressure:
100 ~ 120 (mmHg). Slide left to view the blood pressure record
Blood oxygen monitoring: stick the watch close to the wrist and the best
wearing position is above the wrist bone and arm. The real-time blood oxygen
value can be measured. The normal range of value is generally 95% to 100%.
Slide left to view the blood oxygen record
Bluetooth photographing: when the mobile phone is not in the locked screen
state and the app interface is opened, the watch enters the Bluetooth
photographing, the mobile phone enters the photographing interface, the watch
clicks to take photos, the mobile phone will take photos and store the photos
to the mobile phone Siri: press and hold to realize remote control
[Matters needing attention)
- Avoid wearing watch, hot shower, sauna and diving in daily use. When the water meter is stained with water, please wipe the surface water stains with a soft cloth before operation.
- The measurement results of this product are for reference only, and the data provided by the product are not used for any medical purpose and basis.
- If the power adapter is used for charging, the power adapter meeting the requirements of corresponding safety standards shall be used to avoid bursting or fire caused by fake and shoddy power adapter.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>