FOREVER WDC-115 AirThin Wireless Charger User Manual

: June 7, 2024
: FOREVER

Table of Contents

Specification
Way of use
Safety
Markings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FOREVER WDC-115 AirThin Wireless Charger User Manual

Thank you for purchasing the wireless charger WDC-115 by Forever. Before use please refer to the User’s manual, and save it for the future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. The device should not be exposed directly to water, moisture sunlight fire or other heat sources. We hope that the product by Forever fulfils your expectations.

Importer’s data:
TelForceOne S.A. ul. Krakowska 119 50-428 Wrocław Poland

Designed in Poland
Produced in PRC

Specification

Input voltage: 5 V ⎓ 2 A; 9 V ⎓ 2 A
Standby power consumption: < 0,1 W
Power: 7,5 W/10 W/15 W
The type of charging: wireless
Charging rate: < 8 mm
Cable length: 1,0 m
Compatibility: with devices supporting Qi technologies
Type of USB socket: USB-C
Weight: 50 g

Maximum radiated power for frequency 110 – 205 kHz is -10,42 dBm EIRP

TelForceOne S.A. declares that the product is compatible with requirements and other relevant provisions of the 2014/53/UE directive. You can download the declaration of product on the website https://manual.forever.eu

Way of use

To start using the charger, connect it to the power supply source – e.g. smartphone wall charger, with the USB-C cable. When connected it’s ready to use. Make sure your phone is supporting Qi standard, and place it in the middle of the charging surface, charging will start automatically.
When your device is fully charged, take it off the charger and unplug it from the power source.

NOTES: for more effective charging, the device should be positioned correctly. The device to be charged must be directly above the charger coil, which is located in the center of the coil – otherwise charging may not be performed properly. It is recommended to remove all device protections, e.g. cases, covers.

Safety

Read and keep the manual for the future reference.
Do not remove the device cover. There are no parts which can be repaired by a user. Any repairs should be performed by qualified serviceman.
When using inductive charging, remove any type of pads, covers and accessories, as they may interrupt the charging process.
Do not put metal objects on the inductive charger, as this may lead to damage of the device.
Protect the device against contact with water and moisture to avoid electrocution.

Markings

Correct disposal of used equipment
The device is marked with a crossed-out garbage bin, in accordance with the European Directive 2021/19/EU on used electrical and electronic equipment (Waste Electrical and Electronic Equipment). Products marked with this symbol should not be disposed of or dumped with other household waste after a period of use.

The user is obliged to get rid of used electrical and electronic equipment by delivering it to designated recycling point in which dangerous waste are being recycled. Collecting this type of waste in designated locations, and the actual process of their recovery contribute to the protection of natural resources.

Proper disposal of used electrical and electronic equipment I beneficial to human health and environment. To obtain information on where and how to dispose of used electrical and electronic equipment in an environmentally friendly manner user should contact their local government office, the waste collection point, or point of sale, where the equipment was purchased.

The device and accessories are in line with the directives on operational safety, health and environmental protection referred to in the declaration of conformity. It is compatible with the provisions of the New Approach Directives.

Separate collection of used products and packing allows materials to be recycled and used again.

Electrical and electronic devices may not be disposed of with domestic waste. By recycling reusing the materials or other form of utilising old devices, you are making an important contribution to protecting our environment.

Icons