DK MP-10pro Saxophone Wireless System Instruction Manual

DK MP-10pro Saxophone Wireless System

Product Introduction

Thanks for purchasing DK MP-10Pro Saxophone Wireless System Optimized for the saxophone audio curve, using DSP audio digital signal processing technology for high-fidelity reproduction of the saxophone’s original sound.

1. UHF communication frequency range, allowing multiple sets to be used simultaneously.
2. Unobstructed transmission up to 40 meters with low latency.
3. Built-in reverb effect function, adjustable reverb space and dry/wet ratio.
4. Three dynamic frequency adjustments, suitable for soprano, alto, and tenor saxophones.
5. Supports Bluetooth car connection, headphone monitoring, microphone input, internal recording, and live streaming
6. Gooseneck microphone with silicone shock absorption function effectively eliminates key noise.
7. Charging storage case for convenient and extended battery life, one-button charging activation, and the ability to charge your phone.
8. Suitable for a variety of instruments in different ranges, including saxophones, trumpets, and French horns.

Components of the product

1. Transmitter
2. Receiver (XLR interface)
3. Charging case (can also be used as a portable power bank)
4. Gooseneck microphone
5. SOne-to-two charging cable
6. Internal recording cable (1.5m)
7. Type-C to 3.5mm audio adapter

Function

Using

1. Please put the Microphone and plug into the top of the Transmitter and fix it.
2. Fix the Transmitter on the outlet of Saxophone, pull the transmitter down and push – shown as picture.
3. Bend the Microphone down, make it to the bell and stay in a best situation.
4. Put the Receiver into the amp, Sound console or Sound card, then, you can enjoy it.

Switching On and Connecting

Charging Bin

Live Recording

When the transmitter is in normal working condition, you can use the included charging adapter cable to enable monitoring, recording, and live streaming functions.

The above is the live microphone diagram

Scene Modes

While the device is in normal operating mode, you can easily switch between different sound scenes to adapt to different saxophone types by short-pressing the “CATCH” button on the transmitter. When the device is powered on and paired correctly, the working status indicator lights on the transmitter and receiver will stay steadily lit in blue.

Reverb Sound Effect Mode

Battery Status Instructions

Internal Recording With a Sound Card
In normal working conditions, you can use a data cable to connect one end to the “CATCH” button on the transmitter and the other end to a computer to achieve internal recording with a sound card.

Product Specifications

• Product Name: DK Saxophone Wireless System
• Model: MP-10Pro
• Communication Frequency Range: UHF Band (657.3MHz- 661.2MHz)
• Frequency Response: 20HZ-18KHZ
• Audio Dynamic Range: = 106dB
• Sample Rate and Accuracy: 48KHZ/16bit
• Latency: <5ms
• Signal Distortion: <0.5%
• Sensitivity: <-108dBm @12dB SINAD
• Transmitter Battery Capacity: > 950mAH/3.7V
• Receiver Battery Capacity: > 500mAH/3.7V
• Charging Case Battery Capacity: 5000mAH/3.7V
• Transmitter/Receiver Battery Life: Approximately 5 hours
• Dimension (Length : x Width x Height):
• Charging Case : 137.9594.9536.64 mm
• Transmitter: 60.00 x 45.00 x 25.68mm
• Receiver: 66.08 x 27.58 x 21.01mm

Safety

1. Before installation and use, please read the user manual thoroughly.
2. This product has a built-in lithium battery. To ensure better performance, it needs to be charged and activated once every six months.
3. This product is a high-precision electronic device. Unauthorized modifications are strictly prohibited; otherwise, the warranty will be automatically voided.
4. Store the product in a well-ventilated and dry environment. Avoid exposure to moisture or extreme temperature conditions.
5. Prevent any foreign objects or any type of liquid from entering the device, such as flammable materials, water, soft drinks, etc.
6. To avoid noise and interference issues, please refrain from using other brands of wireless transmission products alongside this device.
7. When the product is not in use for an extended period, please turn off the power switch. If you need to charge it, use a charger with a voltage of 5V/2A. Additionally, when the battery level is critically low, it is necessary to turn off the power switch before charging.
8. To ensure the proper operation of the device and avoid interruptions during your performance, check the battery status of the device eight hours before the performance. If the battery level is insufficient, charge it promptly. To extend the device’s lifespan, charge it every 2-3 months. during your performance, check the battery status of the device eight hours before the performance. If the battery level is insufficient, charge it promptly. To extend the device’s lifespan, charge it every 2-3 months.It is strictly prohibited to leave the product powered on without shutting it down, which may lead to excessive discharging.
9. This product has a built-in lithium battery. Avoid exposing the battery to excessive heat sources, and make sure to dispose of used batteries under local regulations for safe disposal of electronic waste.
10. Do not attempt to repair this device or replace internal components. If any repairs are needed, please contact your retailer or authorized service center for assistance.

Quality Assurance

Dear User,
Hello! When using DK products, please carefully review the product manual. If you encounter any difficulties or have questions, please reach out to your local authorized dealer.
Official Phone: +86-756-3666689
Official Website: www.dk-music.cn
We are here to assist you with any inquiries or concerns you may have.
Thank you for choosing DK products.
Sincerely,
Guangzhou DK Electronic Technology Co., Ltd

Certificate of Quality

FCC

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SCANNER

Guangzhou DK Electronic Technology Co., Ltd.

• Manufacturer : Zhuhai DK Electronic Technology Development Co., Ltd.
• Address: Room1601A, Building A, Dazhou Science Park, No.1 Gangle Road, Hi-Tech Zone, Zhuhai, Guangdong, China
• Tel: +86-756-3666689
• Website: www.dk-music.cn

Made in China

Documents / Resources

| DK MP-10pro Saxophone Wireless System [pdf] Instruction Manual
MP-10pro, MP-10pro Saxophone Wireless System, Saxophone Wireless System, Wireless System, System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>