SJE RHOMBUS JB Plugger System Owner’s Manual
- August 14, 2024
- SJE RHOMBUS
Table of Contents
SJE RHOMBUS JB Plugger System
SPECIFICATIONS
- VOLTAGE : 120 VAC or 230 VAC
- ENCLOSURE : 6 x 6 x 4 inch (15.24 x 15.24 x 10.16 cm) NEMA 4X weatherproof thermoplastic with hinged door.
- SEPARATE ALARM AND PUMP CONTROL SWITCH
- RECEPTACLE : 120 VAC type 5-15; 230 VAC type 6-15
- RISER EXTENSION COUPLING AND WASHERS
- CORD SEAL : Custom engineered to provide liquid tight seal and provide strain relief for pump and float cords.
- ELECTRICAL CONDUIT HUB
Product Information
The JB PLUGGER System provides a convenient wiring connection for pump station applications. It is designed to simplify the wiring process for typical pumping station installations.
FEATURES
- NEMA 4X enclosure with hinged door
- Separate alarm and pump control circuit
- Receptacle for pump and pump switch (120V or 230V)
- Tank Alert® AB alarm system provides high or low level alarm (optional)
- Pump float provides pump control (optional)
- Control float provides alarm activation (optional)
- Riser extension coupling and washers
- Custom-engineered liquid-tight cable seal
- Strain relief for pump and float cords provided by cord seal
- Electrical conduit hub
- Terminal strip for use with alarm system
Specifications:
- Voltage: 120 VAC or 230 VAC
- Enclosure: 6 x 6 x 4 inch (15.24 x 15.24 x 10.16 cm) NEMA 4X weatherproof thermoplastic with hinged door
- Receptacle: 120 VAC type 5-15; 230 VAC type 6-15
- Cord Seal: Custom-engineered for liquid-tight seal and strain relief
Part Numbers and Pricing:
| Part # | Shipping Weight | List Price |
|---|---|---|
| 1007936 | 3.5 lbs. | $291.00 |
| 1011917 | 6.36 lbs. | $458.00 |
| 1019753 | 7.81 lbs. | $551.00 |
| 1022723 | 9.4 lbs. | $647.00 |
Product Usage Instructions
This junction box provides a convenient location to connect all wiring required for a typical pumping station installation. The junction box employs a receptacle to accept a 120 VAC or 230 VAC piggy-back plug and a pump plug. The JB Plugger also features an easy-to-use terminal strip which can be used for connecting an alarm system in the junction box. The JB Plugger package ensures a liquid-tight seal and strain relief for the cable entering the junction box from the pumping station.
Installation Guide:
- Choose a suitable location for mounting the JB PLUGGER junction box near the pumping station.
- Ensure the power source matches the voltage requirements of the system (120 VAC or 230 VAC).
- Mount the junction box securely using the appropriate hardware.
Wiring Instructions:
- Connect the pump plug and piggyback plug to the designated receptacles inside the junction box.
- Use the terminal strip to connect the alarm system wiring if needed.
- Ensure all connections are secure and properly insulated.
Maintenance Tips:
Regularly inspect the cord seals and cable connections for any signs of wear
or damage. Keep the junction box clean and free from debris to prevent
interference with the wiring connections.
Troubleshooting:
If you encounter any issues with the system, refer to the user manual for
troubleshooting steps. If problems persist, contact customer support for
assistance.
JB PLUGGER – Easy-to-install junction box provides a convenient connection for use with one single-phase pump in effluent and sewage chambers.
California Prop 65 requires the following:
WARNING- Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
9500084K-WEB Rev 07/23
© 2020 SJE, Inc. All Rights Reserved. SJE Rhombus is a trademark of SJE, Inc.
- www.sjerhombus.com
- Toll Free 888-342-5753
FAQ
Q: Can I use the JB PLUGGER with multiple pumps?
A: The JB PLUGGER is designed for use with one single-phase pump in effluent
and sewage chambers. It is not recommended for use with multiple pumps.
Q: Is the junction box weatherproof?
A: Yes, the junction box enclosure is NEMA 4X weatherproof, providing
protection against environmental elements.