tp-link Deco X50 Wi-Fi 6 Pod User Guide
- August 13, 2024
- tp-link
Table of Contents
tp-link Deco X50 Wi-Fi 6 Pod
Instruction
Follow these easy steps to set up your additional Wi-Fi pod(s):
- Place the additional Wi-Fi pod where you want it and plug it into a power outlet.
- When the light on the bottom of the Wi-Fi pod is solid green, your additional pod is now connected to your Wi-Fi network. This can take up to 5 minutes.
Check the status of your Pod based on the LED light colour:
Yellow:
Wi-Fi pod unit is starting up.
Blue solid/pulse:
Wi-Fi pod is auto connecting to your network.
Green:
Wi-Fi pod is ready to use.
Red:
Reboot the Wi-Fi pod by unplugging the power adapter. Wait 30 seconds, then
plug back in. If red light continues, check your main Wi-Fi pod as it might
need to be rebooted by following the same process.
Tip: If you have already downloaded the TP-Link Deco App, the Pod(s) can also be added to your existing Wi-Fi network by pressing the “+”sign in the upper right corner of the home screen.
Connecting Wired Devices
Each Wi-Fi 6 pod is equipped with three ethernet ports Your modem will take one port on your main Wi-Fi pod. The additional ports or additional Wi-Fi pods can be used to connect a nearby device.
For example:
- Home Phone Analog
- Telephone Adapter (ATA)
- TV Set Top Box
- Gaming Console
Download the TP-Link Deco app to manage your service.
- Customize your Wi-Fi name and password
- Parental controls
- Create a separate network for guests
Customer Support
For general support for your Internet, or for additional self-help resources
visit
helpcentre.distributel.ca
or contact our Technical Support team at
1-877-810-2877.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>