MotoTec 60V 2500W Raven Electric Scooter Instruction Manual

MotoTec 60V 2500W Raven Electric Scooter

Product Information

Specifications

• Model: Raven Electric Scooter
• Power: 2500W
• Voltage: 60V

Product Usage Instructions

Products Introduction

This electric scooter features a 3D design with a beautiful appearance, unique style, and leisure structure that will captivate you at first sight.

Main Technical Parameters

• Input Frequency: 50/60Hz
• Output Voltage (DC): 67.2V
• Charging Time: 11.5 – 14 hours (depending on remaining power)

Use Method and Matters Needing Attention

• Precautions for Safe Driving: Always ensure safe driving practices.
• The Correct Method of Use: Follow the recommended guidelines for operating the scooter.
• Inspection, Cleaning, and Maintenance: Regularly check and maintain the scooter for optimal performance.

Common Faults and Elimination Method:

• Check for abnormal positions that may affect operation.
• Ensure the brake handle functions properly for normal braking.

Electrical Principle

• This chapter discusses the electrical principles of the scooter.
• Quality Assurance and After-Sales Service
• Warranty Principle: The company provides a warranty for faults within a specific period.
• Maintenance Record: Keep a record of maintenance activities for reference.

FAQ

Q: Can individuals under 16 years old use this electric scooter?

A: No, this electric scooter is not suitable for individuals under 16 years old. Please refer to the safety guidelines.

WARNING Not for those under 16 years old Read this manual completely before riding your electric trike

Products Introduction

This scooter is to use 3D design, beautiful appearance, unique style, and leisure structure, which lets you fall in love at first sight.

The main characteristics are as follows:

1. Lithium battery: Products by UL and CE certification and registrations of safety inspection, safe and reliable; Service life is 3 times of lead-acid batteries, the basic do not need to change – a long life; Weight is 1/3 of lead-acid battery, lightweight; Products with high voltage and powerful, climbing speed fast, high energy; Recognized as a green energy, no any pollution in the whole process of the production and use.

2. Battery: Hidden in the center of the pedal beneath the surface, force equilibrium,
   small, light, safe.

3. Motor: The best magnetic steel material is qualitative, the high-quality silicon steel sheet, bold coil, precision bearings, gross motor shaft, powerful and durable.

4. Tire:Using ultra-wide beach car straight grain vacuum tires, generous compaction, better stability, and more grip, the braking distance is shorter, no worry about a flat tire, ride safe, comfortable, and soft.

5. Frame: From 3D virtual design and assembly to the advanced technology of automatic pipe bending, robot automatic welding with one super pedal, grind arenaceous non-slip, let you sit or stand, ride safe.

6. Disc brake: The cabinet and delicate hydraulic disc brake, the pump body aluminum alloy forging technology, advanced CNC processing technology, flexible, and the braking action free.

7. Direction: Leisure streamlined human body engineering design, tough and firm, allowing you to be easily manipulated.

8. Hand tube: using soft rubber mold injection molding, let your hand feel comfortable.

9. Seat cushion: adopt a new plastic material plate, high elastic foam, senior anti-slip leather, elaborate design and perfect appearance, and proper height, making your long ride more comfortable.

10. Smart charger: according to the automatic portable design, charging without care, wherever there is a 110-240V AC power supply, rechargeable use.

11. Controller: specially set-up, soft start, no sense of frustration, driving safer.

Main Technical Parameters

The main technical parameters of the scooter

1. Product Size: 210 86 102cm 82.633.840inches
2. Wheelbase: 154cm 60inches
3. High: 104.5cm 4linches
4. Weight: 70kgs 154lb
5. Tire specifications: Axle 1: 110/70-16 M/C Axle 2: 215/40-12 inch
6. Maximum load: 200 kgs 440lb
7. Design top speed: <45 km/h 27mph
8. Range: 65 ~ 80 km 24mph–37mph
9. Maximum torque: 95 N/M
10. Maximum climbing: 10-15°
11. Braking performance (20 km/h): Dry: ≤1 m; Wet: ≤3 m

The main technical parameters of the battery

1. Battery type: 18650lithium-ion batteries
2. Capacity: 30AH
3. Nominal voltage: 60V

Main technical parameters of motor

1. Motor models: brushless DC motor hub
2. Rated power: 2500W

The main technical parameters of the controller

1. Current limiting protection value: 25 ÷ 1A
2. Under-voltage protection value: 52 ÷ 0.5V

Charger main parameters

1. The input voltage (ac): 100-240VAC50/60HZ
2. The output voltage (dc): 67.2 ~2.0A
3. Charging time (the remaining power the case may be): 11.5 ~ 14 h

Note: the above parameters change, the company without prior notice, see company technical Parameters of model library!

Use method and matters needing attention

1. Precautions for safe driving
2. Please observe the traffic rules, safety, and speed control, please within safe speed (pay attention to the local safe speed within 20 km/h).
3. Before driving, be familiar with the contents of this manual first, and then find an empty field practice, be sure to complete control of the vehicle’s driving essentials, familiar with the structure and properties of the locals, this is the foundation of safe driving.
4. Do not lend or are not familiar with and do not drive personnel. Single-hand or driving after separation, drunk driving is very dangerous.
5. Driving rain and snow days to double pay attention to safety, rain and snow day by the damp ground will bring danger!

  * Therefore, we should avoid high speed, turn carefully, and especially should remember snow days in advance brake in case of an accident.
5.  **The correct use of a helmet:** put a helmet right on his head, and tie-down straps.
6.  **Correct dress:** don’t wear tights, the whole body to move freely, cuff don’t open your clothes, wear low heels as much as possible.
  *  **Note:** to facilitate maintenance, repair, and service, our company produces every car that has a frame. size and motor number, to help sales units to provide you with better service. Inscribed on the base plate of the car chassis number, is the machine number of engraving on the motor shell cover.
7.  **Cargo can’t be overweight:** default maximum load of 200 kg. And not slide, the manipulation of the hand feeling is different, too much cargo, hand easy to vibrate out of danger, the vehicle stability load for 1 person, pedal before cargo or manned risk is very big.

2. The correct method of use

   • The driving method
   • Keep the natural posture, can drive.
   • Driving posture: please keep this mat in the middle of the, often in case of front wheel load loss, hand tremor, and danger.
   •  Driving posture: turning slowly tum during acceleration, avoiding catching up leading to dangerous driver gravity instability.
   • On the road paved road surface damage or debris should slow down.
   • Rain and snowy weather, the road surface is too wet causes to slide, so focus on driving slowly; When the road surface waters then pedal the battery box below, please don’t ride, and avoid the vehicle’s electric parts damage caused by short circuits. Braking performance will decline at the same time, easy to cause an accident.

3. The way of parking

   • Attention when parking vehicles and pedestrians around, slowly to the dock flat road on the right side, avoid parked on the ramp.
   • After the car stops, lock a right-handed and pull off the power supply, then use locks to lock.
   • The power indicator method of use
   • Turning on the power supply voltage indicator, full electric LOW \ HALF \ HIGH 3 Led-lights, HIGH lights that electricity used up 75% of the rated capacity, HALF lights charge 25% of the rated capacity, LOW lights flashing indicates that power is less than 10%; So when you find LOW lights flashing charging immediately.

4. The use of the power lock

   • Power lock key clockwise rotation through a gear, can start the motor., not the keys, and shut off the power, more can’t counterclockwise shut off the power locks, to cut off the power supply motor stalling. Turn off the power supply after parking, power locks shall be counterclockwise, and pull out the key.

5. Hand tube(speed)

   • Rotate in the direction of the driver is accelerated, relax rotary reduction, power of the motor stops after a reset.

6. The use of the disc brake method and matters needing attention

   • The use of the disc brake The brake clearance adjustment: turn the adjusting nut by a 2 mm Allen wrench
     (between the brake lever and handlebar tube), adjust the gap between the disk and the pads, until you feel comfortable position is advisable.

   • The brake pads wear every six months, and more than 1 mm of brake linings on the handle of the location of the adjusting nut has to adjust, you need to change the time; Replace the brake pads, with a clean bottle with a screwdriver to press the one piece of brake pads into, with space to take out another piece, after replacement of the new brake pads, need to put the brake on the brake lever adjusting screw back into the right position (you feel comfortable position).

   • Period: It takes time, for the surface of the disc brake break-in to completely after running, braking force will increase obviously.

   • A new brake was used in the first week period, the period not to crush the brake, it would have been on ontology and pads Irreversible damage. The right operation method is light with normal cycling brakes, brake pads, and brake disc friction kept moderate.

   • Oil change: the disc brake uses mineral oil, the brake handle feels weak needs to be replaced (usually 2 ~ 3 years), straw with a syringe pump oil change.

   • The matters needing attention

   • Please do not be in the vicinity of disc brake disc brake pads and calipers use lubricating oil, and do not touch directly with the hand disc brake disc and brake pad surface, otherwise, can significantly reduce the braking performance.

   • For new brakes is best not to pour water, to avoid a small amount of lubricating oil in the assembly clearance pollution to the brake pads.

   • The hydraulic disc brake system has strong power, so you need it in a safe place to practice, adapt to its differences from the common brake, and avoid energetically kneading dead brake, causing the wheel to lock out of control and injured.

7. The use of the charger

   • Method of use
   • When charging, first insert the battery box, and then plug into the mains AC220V plug, charging end, on the other hand, the first grid AC220V plug, pull out the battery box plug again.
   • In normal charging, the charging indicator light shows red, full of, and the charge indicator shows green.
   • If the temperature of the charge temperature, a red light flashes, and the charger is in a state of temperature protection, please move the charger to a cool and ventilated place to use, when the internal temperature of the charger to charging 60°back to normal.
   • When used without access to the battery, charger output is less than 42 v pulse Voltage, when testing in the output port between plus or minus 1 kΩ resistance load, you can test the actual charger charging voltage.
   • The matters needing attention
   • The charger can only be used indoors.
   • It is strictly prohibited in a confined space or under the scorching sun and high-temperature environment, can not put the charger in barrels or end charging in the box.
   • Is prohibited without charge, connect the charger light to the AC power source for a long time.
   • In the process of charging, such as the abnormal light, odor, or overheating charger shell, should immediately stop charging, and the charger for repair or replacement.
   • Shall not be removed or replaced charger inside the device.
   • To should not recharge the battery.
   • Don’t use in a combustible gas environment, which may cause fire or explosion.
   • Don’t put the charger near water or wet, is likely to fire or get an electric shock.
   • Ruby because of collision damage to the charger reveals the internal components, please don’t touch, is likely to get an electric shock injuries.

8. Use methods and matters needing the attention of the battery

   • Charging
   • Be sure to use the company’s specially equipped charger to charge; an Informal or unqualified charger can shorten the battery life or battery failure!
   • Completely discharge the battery stops (electric) can be down more than 95% of the electricity in 5 hours, 8 hours 100% into electricity.
   • Charging banned direct contact with metal is negative at both ends.
   • Load products, electricity about 80% of the new car should be added before use electric 3 ~ 10 hours.
   • On hold for more than a month, the battery charge capacity will reduce by about 5%, it is recommended to use it before charging.
   • Please charge in time, to ensure the mileage.
   • For all landowners in the process of charging, the charger may be fever, as long as the temperature is not more than 60 °C, that is normal.
   • Today when charging, please put the charger and the whole car to stable, dry, no inflammable, explosive, and out of the reach of children.
   • Ruby completely discharges the battery within 24 hours after having to recharge the battery and charging time of at least 3 hours.
   • Attending charge shall not be a short circuit.
   • The discharge (use)
   • Can only be used in electric vehicle batteries, and shall not be used for other purposes, otherwise is no warranty.
   • In case of a short circuit, the battery management system will be automatic protection, and the power cord of the concatenated insurance will fuse, double protect your battery, short circuit, and replace when terminates after about 2 minutes, the battery can work normally.
   • Controller of the electric car, motor, speakers, lighting equipment damage or configuration is not reasonable, all can lead to large current discharge batteries, the battery is the protective stop output, but will be back in 10 seconds, ride for you will not have any impact.
   • Battery operating temperature range: -10 °C~55°C, like other cells, with lower temperatures, the use of battery energy decreases, which belongs to the normal phenomenon.
   • Not to discharge mouth short circuit.
   • Storage
   • Such as storage for a long time (more than a month, suggested charging to 60%~80% of the battery; Storage every three months during the need to supply electricity, the battery also needs to supplement battery before use.
   • The battery should be kept in a cool, dry environment.
   • Storage should be avoided in the process of conducting objects across the electrodes that will be directly connected.
   • Near the fire source shall be forbidden to use the battery.
   • Disassembling the battery is prohibited.
   • Ban modification on batteries.
   • Note
   • Battery deformation or heat is found, should stop to use, and to the company or the maintenance department for help.
   • Such as a fire, do not use water directly for the battery fire extinguishing, the proposal USES sand covering, a foam fire extinguisher, thick cloth soaked with water, and the fire extinguishing methods of dealing with organic solvent.
   • Because there is no time to completely discharge the battery charging the battery failure is caused by no warranty.
   • Cannot be arbitrarily discarded batteries.

Inspection cleaning and maintenance

On a regular basis or daily check the item

1. Note that the vehicle is in a safe location.
2. Abnormal position the day before, to see whether affects the operation.
3. Brake braking effect: the brake handle modest fashion is downy, clear, can normal braking.
4. Crack, damage, abnormal tire wear, as well as metal, stone, glass, and other sharp objects embedded; The depth of the grooved tires, tires on the convex block have to be new tires when you wear off two-thirds; According to the situation of tire contact with the ground part of the sag, check the tire pressure, normal pressure values before and after the tire is 1.5 kg/ cm2.
5. Power voltage indicates whether or not the full check article 3 (in chapter 4, paragraph 2).
6. Steering system checks: up, down, forward, backward, left, right handlebar and front fork, elastic moderate, flexible steering, if there is a touch attack clattering sound, loose steering system, a sound, and other issues, please contact dealers, to provide you with the most perfect after-sale service.
7. The front and rear axle is loose.

Common faults and elimination method

Electrical Principle

Quality assurance and after-sales service

According to the consumers’ rights and interests of the People’s Republic of China protects a law “the legal provision, with reference to the relevant document issued by State Bureau of technical supervision to effectively protect the legitimate rights and interests of consumers, improve product quality civil liability system, also facilitate travel 3 packets (repair, replacement or return) obligations and responsibilities, on the strength of the warranty card to sell car units designated by the maintenance department enjoys a” 3 Guarantee “service, specific provisions are as follows:

1. 3 Guarantee” in the scope of the repair, replacement or return
2. please check on the car when your car, and is entitled to request sales staff to provide effective bill and warranty card, as well as the maintenance unit’s address and telephone number.
3. after a car you should read the instructions for use, to master the correct method of use and daily maintenance and matters needing attention, If the electric car doesn’t yet know what to use people, must be paid to the interpretation, lest cause accidental damage.
4. user operation when used properly according to product manuals within 7 days from the date of products sold in performance failure. Consumers can choose a replacement or repair:
5. in 3 guarantees of a period of validity, Canon repairs many times repairs that cannot be used properly, the strength of the repair units to provide repair records and certificate, identified through after-sales service of the company headquarters, can exchange models of products for consumers, changing the same products, under the provisions, charging depreciation cost (2.7%), the vehicle every day, for the battery will not be used by the exchange.
6. Don’t belong to the scope and content of “3 guarantees”
7. Users are not used as stipulated in the operating instructions, maintenance, or adjustment caused by the fault;
8. Users are modified, and folded to repair the damage and its decomposition, the failure of the original state, not for technical appraisal and analysis of fault;
9. Use the “Walter boring electric parts of three packs of”;
10. Users, maintain undeserved or failures caused by accidents;
11. No warranty card or CARDS of vehicles;
12. Wearing parts, consumer goods will not be “3 packets”;
13. Has been a failure, but users continue to use the secondary fault;
14. No certificate of vehicles;
15. To change the invoice date and the car parts coding.
16. The principle of the warranty
    • 3 Guarantee” outside the scope of faults and “3 Guarantee” period after the main parts of our company are responsible for repair, but the charge for.

Maintenance record

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>