NEtumScan RF2.4G Wireless Desktop Scanner Instructions

NEtumScan RF2.4G Wireless Desktop Scanner

Specifications

• Type: 3-in-1 Scanner
• Connectivity: RF 2.4G, Bluetooth, USB
• Package Includes: Scanner, USB Dongle, USB Cable, Quick Setup Guide
• Firmware Version: V1.6.30

Product Usage Instructions

Connection Setup:
The scanner can be connected to your device via Bluetooth, USB receiver, or USB cable. Follow the steps below:

1. Plug the USB dongle into your device.
2. Power on the scanner.
3. For USB connection, scan USB COM Port Emulation to allow data transfer like a serial port.

Data Transmission

USB Dongle: Power on the scanner and set up keyboard language. For wireless transmission, enable USB HID-KBW feature.
Bluetooth: Power on the scanner and scan
Bluetooth Transmit. Change transmit speed by scanning the appropriate barcode.function key mapping, scan the Function Key Mapping barcode.

FAQ:
Q: How do I restore the scanner to factory defaults?
A: Scan the barcode %#IFSN0$B to restore the scanner to factory defaults.

RF2.4G/BLUETOOTH/USB 3 IN ONE SCANNER MANUAL

Package Included

• V1.6.30
• 1PC * Scanner;
• 1PC * USB Dongle;
• 1PC * USB Cable;
• 1PC * Quick Setup Guide

Note: This is a general manual. If you need more configurations please download it from our official website: https://www.netumscan.com/

Firmware Version

Firmware version will be displayed by scanning “$SW#VER”.

Factory Defaults
Scanning the following barcode can restore the scanner to factory defaults.

Barcode Programming
NetumScan barcode scanners are factory programmed for the most common terminal and communication settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.

Important Notes :
Some command barcodes only work in a particular connection mode.Pay attention to below symbols when you scanning command barcodes.

• Command barcodes only apply to scanner work via Bluetooth.
• Command bacodes only apply to scanner work via USB Dongle.

Get Started

Connection Way
Scanner can be connected to your device via bluetooth, USB receiver or USB cable, you can choose one of the connection way to connect scanner with your device.

How to transmit data via USB Dongle ?

1. Plug the USB dongle into your device.
2. Power On the scanner
3. Setup keyboard language: US keyboard was set by default. If you use other type of keyboard please refer to Keyboard language.
4. If you want to change bluetooth transmit to wireless transmit, you will have to scan “Wireless transmit” then follow step (1) and (2) to complete the configurations.

USB HID-KBW
When scanner connects with your device via USB cable/USB Dongle, USB HID-KBW feature will be enabled by default. Scanner’s transmission will be simulated as USB keyboard input. It works on a Plug and Play basis and no driver is required.

USB COM Port Emulation
When scanner connects with your device via USB cable, by scanning “USB COM Port Emulation” will allow your device to receive data in the way as a serial port does.

Note: A driver is required for this feature.

How to transmit data via bluetooth ?

1. Power on scanner.

2. Scan “Bluetooth Transmit”.

3. Make sure the device is in range with Bluetooth turned on.

4. Pressing the scan button will initiate the attempts to connect.

5. If a connection is made, the blue light will stop blinking and turn solid.

6.  If a connection is not made after several attempts, the scanner will emit a long beep (and the blue light will turn off).

7. Bluetooth working channel is not set by default. If you want to connect via bluetooth, you will have to scan “Bluetooth Transmit” before pairing.

Basic Mode (HID) (default)

• NO software installation needed
• Connects to most devices
• Scanner interacts with host device like a keyboard

Application Mode (Apple Specific Serial Profile)

• For iOS Devices
• If you have an iOS application that supports our Scanners this is the mode to use.

Applicatin Mode (Serial Port Profile)

• For Android or Windows
• Software installation is required
• If you have an application that supports this is the mode recommended

Important Notes:
Remove the pairing information both from devices-host PC/phone and the scanner when you change the data transmit mode.

Bluetooth Transmit
Speed By scanning the appropriate barcode below will change the bluetooth transmit speed.

Keyboard Language
For example If you use French Keyboard, scan command barcode of “French keyboard . If you use a US keyboard you can ignore this step.

Working Mode
If you are heading for a working area which lies outside the Bluetooth signal range, you may activate scanner’s store mode, following steps described below. Under this mode, all scanned data will be stored directly into the buffer memory of the device. Furthermore, data entries will be permanently saved in the buffer memory prior to the manual upload into the working station, so that you may upload them when you are near your working device.

Idle Time
Time period set for scanner from idle to sleep. Default Idle Time: 3mins.

Convert Case

Beep Volume
By scanning the appropriate barcode below will change the beep volume.

Function Key Mapping

When Function Key Mapping is enabled, function characters are sent over the keypad.

FAQ

1. Some barcodes cannot be read, why ?

   • Dirty or unclear barcodes might not be read.
   • The possible reason is that setting for some barcode types not commonly used is off by default. You need to activate a speci?ic barcode type to get it to work. Please contact us for help or you may go to our official website “www.netumscan.com” to download the complete manual and then refer to the section of “Symbologies”

2. How to change terminator to TAB ?
   Please refer to the section of “Terminator configuration” from the manual downloaded from our official website.

3. Are there any barcodes for applying or removing prefix & suffix?
   Yes, you may go to our official website” www.netumscan.com” to download the manual ‚refer to the section of” prefix and suffix” or turn to customer service for help.

4. 4. How to solve the messy code problem encountered while using other foreign languages?
   The default language is English. Please refer to “Keyboard Language” to change the language.

5. Why scanner can not read Italy Pharmacy code?
   Download the manual from our official website according to the scanner model number, refer to the section of Code32 then scan “Enable Code32” to enable the scanner to read Italy pharmacy code.

6. Why scanner can not read add-on 2 or 5 codes?
   Download the manual from our official website according to the scanner model number, refer to the section of ADD-On code and scan the appropriate command barcode to enable the scanner read it.

7. Why scanner cannot read data matrix GS1 in a correct format ?
   Scan “Enable Function Key Mapping” from this manual will enable scanner to output group separator.

Note:
Please do not hesitate to contact us if you need any other configurations.

Contact Information

• Whatsapp: +86 158 0022 1432
• Email: support@netum.net
• Addr.:Room 301, 6th Floor and full 3rd Floor, Building 1, No. 51 Xiangshan Avenue, Ningxi Street, Zengcheng District, Guangzhou City, Guangdong Province, China
• Name: Apex CE Specialists GmbH
• Add: Habichtweg 1 41468 Neuss Germany
• Name: APEX CE SPECIALISTS LIMITED
• Add: 89 Princess Street, Manchester, M1 4HT,UK

References

• NetumScan Document Cameras, Barcode Scanner -Your Business Helper
• NetumScan Document Cameras, Barcode Scanner -Your Business Helper

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>