NEtumScan NS2055L 2D QR Hands-Free Presentation Scanner User Guide
- June 4, 2024
- NetumScan
Table of Contents
NEtumScan NS2055L 2D QR Hands-Free Presentation Scanner
Quick Setup Guide
How to start:
-
Connect scanner with your device via USB cable.
-
Setup keyboard language: If you use US keyboard, it’s plug and play.
If you use other type of keyboard, scan command barcode of the keyboard from this manual. For more information please refer to”keyboard language”. -
Locate cursor on place where you want the scanner to output the data.
Once you finished above steps you scan start to scan.
Programming Code
Netum barcode scanners are factory programmed for the most common terminal and
communications settings. If you need to change these settings ,programming is
accomplished by scanning the bar codes in this guide. An asterisk (*) next to
an option indicates the default setting.
Important Notes:
This scanner has big scanning range, make sure you cover the codes closed to
the one that you want to scan so they will not be scanned by accident.
Factory Defaults
Configure the scanner to revert all settings to factory defaults.
USB Interface (Optional)
USB HID-KBW
By default, the scanner is in HID mode as a Keyboard device. It works on a
Plug and Play basis and no driver is required.
USB Serial
If you connect the scanner to the Host via a USB connection, the USB COM Port
Emulation feature allows the host to receive data in the way as a serial port
does.
If you are using a Microsoft®Windows®PC, you need to download the driver.
Driver is available for downloading from our official website:
www.netum.net
Keyboard Languages
Follow below instructions to configure keyboard language before you using it.
For example If you use French Keyboard, scan command barcode of “French
keyboard ”. If you use a US keyboard you can ignore this step.
Symbology
Some barcode types are not commonly used is off by default. You need to
activate a command barcode to get it to work.
Code 32 Pharmaceutical
FAQ
-
Question: Is there any barcodes for apply or remove suffix?
Yes, you may go to our official website”netum.net” to download the complete manual and refer to the part of “ prefix and suffix” or turn to customer service for help. -
Question: How to solve the messy code problem encountered while using other foreign languages?
Solution: The default keyboard language is English. If you use other types of keyboard please refer to “Keyboard language”. -
Problem: Some barcodes cannot be read.
Solution:
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that setting for some barcode types are not
commonly used is off by default. You need to activate a specific barcode type
to get it to work. Please contact us for help.
Support
If you have any inquiries please do not hesitate to contact us.
Contact Information
Tel.: +0086 20-3222-8813
Email: support@netumscan.net
www.netum.net
ADD:Room 301, 6th Floor and full 3rd Floor, Building 1, No. 51 Xiangshan
Avenue, Ningxi Street, Zengcheng District, Guangzhou City, Guangdong Province,
China
Made in China
References
- NETUM | Barcode Scanner | Thermal Printer | PDA Terminal Device – Guangzhou Netum Electronic Technology Co., Ltd.
- NETUM | Barcode Scanner | Thermal Printer | PDA Terminal Device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>