audio-technica ATH-WP900 Portable Headphones User Manual

: June 22, 2024
: Audio-Technica

Table of Contents

audio-technica ATH-WP900 Portable Headphones
Product Information
FAQ
Safety precautions
Care
Name of each part
Using the headphones
Specifications
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

audio-technica ATH-WP900 Portable Headphones

Product Information

The ATH-WP900 headphones are designed with natural wood for a premium audio experience without compromising performance.
Before using the product, please read the user manual carefully to ensure correct usage.

Product Usage Instructions

Notes on use: The product is made of natural wood, but this will not affect the performance.

Care Instructions

It’s recommended to handle the product with care to maintain its natural wood finish.

Using the Headphones

Connect the cable’s connector plug to the headphone’s connector jack.
Lower the volume on your device, then connect the input plug to the headphone jack.
Fit the earpads over your ears with the L and R markings correctly positioned.
Turn on your audio device and adjust the volume as needed.

About the Detachable Cable

If you notice any signs of cable deterioration, replace it with a new cable. Only detach the cable for replacement purposes.

How to Replace the Detachable Cable

The detachable connector is delicate; pull or attach it in a straight motion to prevent damage.

How to Detach the Cable

Hold the connector and pull straight out following the arrow direction.

How to Attach the Cable

Insert the connector until it clicks into place.

FAQ

Q: Can I use a different cable with the headphones?
A: It is recommended to use only the supplied detachable cable to ensure proper functionality and performance.
Q: How do I know if I need to replace the detachable cable?
A: If you notice any signs of deterioration on the cable, such as fraying or exposed wires, it is advisable to replace it with a new cable.

Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.

Safety precautions

Follow applicable laws regarding mobile phone and headphone use if using headphones while driving.
Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, and construction sites).
To prevent damage to your hearing, do not raise the volume too high. Listening to loud sounds for an extended period may cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact with the product.
Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.
Be careful to avoid pinching yourself between the housing and the arm of the product.

Notes on use

To ensure compatibility and correct usage, always consult the user manual of any device before connecting the product to it.
Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product.
On public transport systems or in other public places, keep the volume low so as not to disturb other people.
Minimize the volume on your audio device before connecting the product to avoid hearing damage from sudden exposure to excessive volume.
Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place to avoid malfunction. Do not allow the product to get wet.
When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) or wear.
Connect/disconnect the included cable by holding the plug. Pulling directly on the cable can result in a broken wire and the risk of electric shock.
The cable may become caught or severed if the product is placed in a bag without adequate protection.
When you are not using the product, store it in the included pouch.
Do not wind the cable around your portable audio device. This may damage or sever the cable.
Use only the included cable. Using a different cable may result in product malfunction.
Lengthening the headphone cable requires a separate extension cable available from your dealer.
Since natural wood may deform or change color under conditions like a hot, humid, dry, ultraviolet (sunlight, fluorescent) environment, be careful in these environments.
The wooden housing may scratch or split if subjected to impact.
The pattern of the wood grain varies on the right and left because the product is made of natural wood, but this will not affect the performance.

Care

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners or other solvents for cleaning purposes.
Use a dry cloth to clean the headphones.
After using the included cable, clean it with a dry cloth if sweat or dirt is present. Failure to clean the cable may cause it to deteriorate and harden over time, resulting in malfunction.
Wipe the plugs on the included cable with a dry cloth if dirty. Using the plug without cleaning it can cause sound skipping or distortion.
To clean the earpads and headband, wipe with a dry cloth. Earpads and headbands may fade if sweat or water dries on them. If the earpads and headband get wet, we recommend wiping them with a dry cloth and allowing them to dry in the shade.
For long-time storage, keep the product in a well-ventilated place without high temperatures and humidity.
The earpads deteriorate over time due to use or storage. For information about replacing earpads or other parts, or for information about other serviceable parts, contact your local Audio-Technica dealer.

Name of each part

Confirm each part before using the product.

Housing
Arm
Slider
Headband
L/R (Left/Right)
Earpad
A2DC connector jack
A2DC connector plug
Balanced cable (1.2 m (3.9’) / 4.4 mm (0.17”) gold-plated balanced plug (5 pole / L-shaped))
Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug (L-shaped))
Input plug
Pin
Porch

Using the headphones

Connect the connector plug of the included cable to the connector jack of the headphones.
- Do not use a cable other than the supplied detachable cable.
Lower the volume on the device you intend to use, then connect the ‘’Input plug’’ to the device’s headphone jack.
Fit the earpads over your ears with the side marked “L” over your left ear and the side marked “R” over your right ear.
Turn on your audio device, and adjust the volume as necessary.
- Also, read the user manual of your audio device.

About the detachable cable

The cable on this product is detachable. If there are signs of deterioration, please replace the cable.
Do not detach the cable except when replacing it with a new cable.

How to replace the detachable cable

The detachable connector is very delicate. Only pull or attach in a straight motion to prevent malfunction.
How to detach the cable
Hold the connector and pull straight out in the direction shown by the arrow.
How to attach the cable
Plug the left connector or right connector in as shown in the illustration. Please plug the connector in until it clicks.

Specifications

Type: Closed-back dynamic
Driver: 53 mm
Sensitivity: 100 dB/mW
Frequency response: 5 to 50,000 Hz
Maximum input power: 1,000 mW
Impedance: 38 ohms
Input jack: A2DC connector jack
Weight (without cable): Approx. 243 g (8.6 oz)
Included accessories: Balanced cable (1.2 m (3.9’) / 4.4 mm (0.17”) gold-plated balanced plug (5 pole / L-shaped)), Cable (1.2 m (3.9’) / 3.5 mm (1/8”) gold-plated stereo mini-plug (L-shaped)), Pouch
Sold separately: Earpads, Balanced cable, Cable