NetumScan Bluetooth CCD Barcode Scanner User Manual

NetumScan Bluetooth CCD Barcode Scanner

Product Information

• Product Name: Bluetooth CCD barcode scanner
• Model Number: V3.10
• Specification: Sensorbi-linear CMOS sensor using APS technology
• LED: 617nm highly visible aiming
• Printing Contract: >25%
• Resolution: 4mil
• Indication: Buzzer & LED
• Scan Speed: 300 scans/sec
• Scanning Width: 30cm
• Bit Error Rate: 1/5 million
• Depth of Field:
  • – 4mil: 10mm-200mm
  • – 10mil: 10mm-300mm
  • – 20mil: 10mm-400mm
  • – 40mil: 10mm-600mm
• Anti-Interference: Industrial lighting or sun will not make any difference
• Decoding Capability: UPC (E&A), EAN, RSS, Code 39, Code 128, UCC/EAN 128, Interleaved, Matrix, Industrial And Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, GS1 Composite, GS1 DataBar
• Button Life: 800,000 times
• Drop: 2M
• Certificates: CE, FCC, RoHS, IP54
• Wireless Parameters:
  • – Wireless Transit Way: Bluetooth
  • – Distance: 10M
  • – Storage Capacity: 512K = 10,000 ordinary barcodes
  • – Battery: 3.7V-1100mAh
  • – Standby: Zero standby
  • – Charge Current: 5V-500mA
  • – Working Time: 5 to 7 days

Product Usage Instructions

1. Turn on the scanner by pressing the button. The BT module will self-check, indicated by a flashing red light. Once the self-check is complete, the red light will turn off.
2. To enter matching mode, either long press the button or scan the Math Settings barcode. In matching mode, the blue light and red light will flash simultaneously.
3. Select the device you want to pair the scanner with. After successful connection, the scanner will beep twice, with the blue light on and the red light off.
4. Charging: Connect the scanner to a USB cable for charging. The green light will be on during charging and turn off when charging is complete.
5. Matching: Follow the instructions above for matching the scanner with a device.

Functional Description

The Bluetooth scanner has various settings and modes that can be adjusted:

• Bluetooth Common Setting-1:
  • Sleep Time Setting: Choose the sleep time between 30 seconds and 10 minutes.
  • Mode Setting: Choose between 2 minutes of sleep or not sleeping at all.
  • Instant Upload Mode: Choose between storage mode or not lost mode.
• Bluetooth Common Setting-2:
  • Language: Select the desired language (default is UNITED STATES).
  • Miscellaneous Setting: Open/close the buzzer, shutdown, or reset wireless to factory settings.
• Bluetooth Common Setting-3:
  • Bluetooth Mode: Choose between HID mode (default) or SPP mode.
  • Show/Hide iOS Keyboard.
  • Bluetooth Upload Speed: Choose between slow or fast (default) upload speed.
  • Bluetooth Reliability: Turn Bluetooth ON or OFF (default).

Specification

Electrical parameter： 3.3 V ± 10%x130mA

Sensor：bi-linear CMOS sensor using APS technology
LED ： 617nm highly visible aiming
Printing Contract：>25%| Resolution ：4mil；
Indication：Buzzer & LED| Scan speed：300scans/sec
Scanning width ：30cm| Bit error rate :1/5millon

Depth of Field

| 4mil| 10mm-200mm
10mil| 10mm-300mm
20mil| 10mm-400mm
40mil| 10mm-600mm
Scanning angle：40°
Anti inference：industrial lighting or sun will not make any difference
Decoding Capability：UPC (E&A), EAN, RSS, Code 39, Code 128,
UCC/EAN 128, Interleaved, Matrix, Industrial And Standard 2 of 5, Coda bar, Code 93/93i, Code 11, MSI, Plessey, Telepen,

GS1 Composite GS1 DataBar

Button life ：8000,000 times| Drop： 2M
Certificate：CE，FCC，RoHS ，IP54

Wireless Parameters

Storage capacity：512K= 10000 ordinary barcodes
Battery: 3.7V-1100mAh| Standby：zero standby
Charge current：5V-500mA| Workingtime：5to7days

Bar code ON/OFF

Match instructions

Bluetooth scanner Match

1. Press button the scanner starts, BT module self-checking when red light flashes, Self check complete then red light off
2. Long press button or scanned “Math “Settings, blue light and red flashing at the same time which means in matching mode
3. Choose the scanner is going to pair with the device,after, connection
   Successful,scanner start to beep twice with blue light on ,red light off .

Charging
Connect the scanner to USB cable to charge, When charging the green light, Charging complete green light off.

Match

Functional Description：
Bluetooth scanner enters pairing mode

Bluetooth Common Setting-1

sleep time setting

Bluetooth Common Setting -2

Miscellaneous Setting

Bluetooth Common Setting -3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>