KLYDE Golf Cart Entertainment System Car Multimedia Player User Manual

KLYDE Golf Cart Entertainment System Car Multimedia Player

Product Specifications:

• Product: Golf FDUW Entertainment System
• Compliance: FCC Part 15 Rules
• Installation Distance: Minimum 20cm between radiator & body
• Device Class: Class B digital device
• Operating Voltage: As specified
• Recommended Usage: Indoor residential installation

Product Usage Instructions

Warnings:

1. Do not use this product while driving.
2. Avoid using with wet hands.
3. Avoid installation in high-temperature, humid, or flammable areas.
4. Avoid obstructing the driver’s view or compromising driving safety.
5. Avoid installation near airbag deployment areas.
6. Avoid leaving in closed vehicles exposed to high temperatures.
7. Operate only at specified voltage.
8. Use original cables and accessories only.
9. Avoid using sharp objects on the product or its accessories.
10. Do not disassemble, repair, or modify the product or its accessories yourself.
11. Keep out of reach of children under 16 years old.

Main Menu Operation:

To navigate the main menu:

• Click the car on the dashboard to enter the home page.
• Click the instrument icon to enter the instrument interface.

Radio Function Operation:

To operate the radio:

• Press to enter the Homepage.
• Click Radio to enter the radio interface.
• Use the various functions on the radio interface as needed (e.g., FM/AM status, EQ setting).
• Press and hold the key for more than 2 seconds to save searchstations in the number list.

Main Menu Navigation:

To navigate the main menu:

• Power On/Off
• Home page
• Return to the previous menu
• Volume increase/decrease
• Dates
• Time
• Status bar
• Music/Radio
• Carplay
• Phone
• Dashboard
• Menu
• Radio
• Bluetooth
• Setting

Frequently Asked Questions

• Q: Can I use this product while driving?
  • A: No, it is not recommended to use this product while driving for safety reasons.
• Q: What should I do if I encounter interference?
  • A: Try reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, or consulting a professional for assistance.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference.
2.  this device must accept interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

WARNINGS

1. Do not use this product while driving.
2. Do not install or use this product with wet hands.
3. Avoid installing this product in areas with high temperatures, humidity, or where flammable or explosive gases or liquids are present.
4. Do not install this product in a location that obstructs the driver’s view or compromises driving safety.
5. Do not install this product on the airbag cover or within the airbag’s deployment area.
6. Avoid leaving this product in a closed vehicle exposed to high temperatures for long periods.
7. Operate this product only at the specified voltage.
8. Use only original cables and accessories.
9. Do not use sharp objects like awls or scissors on this product or its accessories.
10. Do not disassemble, repair, or modify this product or its accessories yourself.
11. Keep this product out of the reach of children under 16years old.

INSTRUMENT PANEL

1. READY
2. Gear level : R N D
3. Trouble light: When there is a fault, the corresponding fault icon is displayed.
4. Power meter: Power value during operation.
5. Car Icons: Click to access the media entertainment system.
6. Voltage: Current operating voltage value.
7. Battery capacity: Remaining battery capacity value.
8. Total traveling time: unit（H）
9. Single tr avelling time：unit（H）
10. Single trip: unit（Km）
11. Total distance traveled: unit（Km）
12. RPM: Number of revolutions per minute.
13. Operating current: Current operating current value.
14. Speedometer: Speed values during operation.

MAIN MENU OPERATION

Click the car on the dashboard to enter the home page, enter different programs, click the instrument icon to enter the instrument interface

1. Power On/Off
2. Home page
3. Return to the previous menu
4. Volume increase
5. Volume decrease
6. Dates
7. Time
8. Status bar
9. Music/Radio
10. Carplay
11. Phone
12. Dashboard
13. Menu
14. Radio
15. Bluetooth
16. Setting

Tap the menu button in the home area to display more APP ICONS. Click the back button to return to the previous interface, as shown below:

RADIO FUNCTION OPERATION

Radio Interface

1. Press to enter the Homepage
2. Click Radio to enter the radio interface

Automatic Search

Press and hold the [ ] key for more than 2 seconds, and the searched stations will be automatically saved in the number list on the right.

RDS Function

1. Click the RDS icon to enter the interface and turn on the rds switch.
2. Return to the screen and search for related channels to listen to.

USB PLAYING OPERATION

Music Playback

1. Press to enter the Homepage.
2. Click Music to enter the music playback interface.

Video Playback

1. Press to enter the Homepage.
2. Click Video to enter the video playback interface.
3. Notice: for safety driving, don’t support play video.

Picture browsing

1. Press to enter the Homepage.
2. Click Gallery to enter the picture browsing.

CARPLAY CONNECTION

1. Turn on the phone’s Bluetooth to search: Machine Bluetooth device name
2. Click the device Bluetooth name to pair the device.
3. Click the connection match (other USB port can work with carplay) icon, pop up carplay connecting interface, then connect successfully. iPhone support carplay wireless and wired connectivity

Connect to iPhone

Touch icon, complete connecting, then connect successfully.

Note: When Bluetooth is in use, the carplay link will be interrupted if it is accidentally disconnected.

BLUETOOTH OPERATION

Amplifier Sound Setting

Enter into the sound setting interface,then choose one from the following sound effects: Standard,Pop， Rock and Roll, Jazz, Class,Soft,ect to set or customize the sound effect.

EQ Settings

1. Press to enter the Homepage
2. Click to enter the EQ interface
3. Click on the left column, you can change the different style to adjust.

Balance Settings

1. Press to enter the Homepage
2. Click to arrow key to adjust the car SEAT POSITION
3. Click on the left column, you can change the different style to adjust

SYSTEM SETTING

Touch the Main system icon to enter the main setting interface,as the below picture:

Brightness Setting:

Adjust screen brightness Lighting Detect switch off / on.

Language and input method setting:

The player supports multi-language.End user can choose different language and input method

About tablet

System Update, status, MCU model, SOR version number, Hardware version number, Linux system version number.

Security Setting:

All the Programs to factory reset.

Backup and Reset:

If a system problem occurs, the end user can choose to automatically restore or restore factory settings.

WIRING DIAGRAM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>