strands Basuri Horn 2.0 User Manual
- July 5, 2024
- Strands
Table of Contents
strands Basuri Horn 2.0
Specifications
- Product Name : Basuri Horn 2.0
- Power Supply : 12/24V
- Sound Volume : 130dB
- Number of Airhorns : 6
- Melodies: 0-18 European melodies
- Cable Length : +/- 3 meters (from horn to receiver)
- Receiver Mounting: Dry environment
- Material: Aluminum
- Maximum Pressure: 11 bar
Product Usage Instructions
Installation:
1. Read all instructions and study diagrams before installing the product.
2. Ensure legal mounting compliance by checking with state or local authorities for regulations.
Maintenance:
1. Keep the product clean by using lukewarm water and alkaline degreasing.
2. Follow degreasing instructions carefully and rinse off gently with cold or lukewarm water on low pressure.
Safety Precautions:
1. Do not use higher volts than specified in the product description.
FAQ:
- Q: How far can the horn sound be heard?
- A: The horn sound can be heard from a distance of 3 to 4 km.
- Q: Can I customize the melodies on the air horn?
- A: The airhorn comes with pre-set European melodies and does not support customization.
Basuri – Musical airhorn 12/24V. 6 airhorns will provide you a sound volume of 130db. Musical airhorn with 0-18 European melodies.
- 00 TONE-HIGH LOW
- 01 BABY SHARK
- 02 WHEN MOM ISN’T HOME
- 03 HORSE RIDING
- 04 COFFIN DANCE
- 05 THE FINAL COUNTDOWN
- 06 LEVELS
- 07 SAVAGE LOVE
- 08 STILL D.R.E.
- 09 IF YOU’RE HAPPY AND YOU KNOW IT
- 10 SANDSTORM
- 11 BELLA CIAO
- 12 LEVAN POLKKA
- 13 MISSION IMPOSSIBLE
- 14 LA CUCARACHA
- 15 HAPPY BIRTHDAY
- 16 PIRATES OF THE CARIBBEAN
- 17 SKY HIGH
- 18 TGV AIRHORN
Cable Length : +/- 3 meters (from horn to receiver) “Receiver must be
mounted in a dry environment”
Material: aluminum
Maximum pressure: 11 bar
dBʼs: 130 dB (can still be heard from 3 to 4 km distance).
READ THIS BEFORE INSTALLATION
READ ALL INSTRUCTIONS AND STUDY DIAGRAMS BEFORE INSTALLING YOUR PRODUCTS
LEGAL MOUNTING
Check with state or local authorities for laws governing usage and proper mounting of your new lights or products.
TAKE CARE OF YOUR PRODUCT
Keep the product clean. Dirt on the lens and heat-sink may shorten the products lifetime.
We recommend using lukewarm water and alkaline degreasing.
Follow the degreasing instructions carefully and rinse off gently with cold or lukewarm water on low pressure.
WARNING!
Strong chemicals should not be used on the product. If you accidentally get strong chemicals on the product, rinse off immediately, use plenty of water so that no chemicals remain in any joint.
Some chemicals have a small amount of solvent in them, this can dissolve
sealing adhesives and compromise the product’s waterproofness.
Some chemicals pull out liquid from plastic and rubber-based components, which
makes the plastic or rubber brittle and bursts more easily.
Be careful not to use high water pressure close up on the product.
If you use high water pressure at short distances, most products find it difficult to close out the water.
WARNING!
Do not use higher volts than the product description states.
Part No : TD30532214
Contact us if you need support: support@strands.se or +46(0)320-450450
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>