VIONMIO L28 Low Power Consumption Mini Wi-Fi Camera User Manual

VIONMIO L28 Low Power Consumption Mini Wi-Fi Camera

Product Description

Thank you for your purchase! This camera has a unique portable design that makes it ideal for use in a variety of applications, recording your colorful daily life or keep your family safe. Before use, please follow the instructions to set up your camera correctly.

Warm Tips:

1. The camera battery will become low due to long-time transportation. Please charge for 2-4h before use.
2. Only support 2.4G frequency WiFi, does not support 5G frequency WiFi. Please check before connection.
3. In order to improve the stability of WiFi connection and the success rate of configuration, please keep the camera close to the WiFi router during the configuration process.
4. Please turn off the camera before inserting or removing the Micro SD card.
5.  Make sure you input the correct account and password when connecting to WiFi router.
6.  If the WiFi is in the WEP encryption mode, please change to the WPA mode.
7. Before setting remote connection, please make sure you have set local connection successfully.

Product Structure

Model: R6

Indicator

IP network with card recording

mode

| Blue light flashes slowly
IP network without card recording

mode

| Blue light flashes slowly
No Network| Red light and Blue light flash slowly
Wake from dormancy| Blue light is always on
Sleep mode| Red light and Blue light are off
Not fully charged| Yellow light is always on
Fully charged| Yellow lights off

App Download

Download the “Mastercam”App: For Android: Please search “Mastercam”on the “Google Play”to download it. For iOS: Please search “Mastercam”on the “App Store”to download it. Besides, you can scan the QR code to download the App, please refer to the below pictures.

Connect your phone to the camera’s WiFi hotspot

1. Turn on the camera then open the phone settings;
2. Turn on phone WLAN/WiFi;
3. Connect to the camera’s WiFi hotspot named R6-*****. Password: 123456789;
4. Open the App MasterCam;
5. Scroll down to refresh adding the camera;
6. Successfully added to the device list with the status “Online”;
7. Please modify your password. Note: If you have reset the device, it will prompt error password, please enter the default password 111111 to confirm and then skip to step 7.
8. At this time the camera is working in AP mode and is not networked, the red indicator light is on;

Connect Camera to WiFi Router

In the AP mode viewing interface, click on “Device Setting” and then select “WiFi”; Select the WiFi signal you want to connect to and enter the correct WiFi password to configure the network for the camera.

IMPORTANT: Please make sure that the WiFi password you enter is correct! If you enter a wrong WIFI router password, please reset the camera and start over with step 1. When a WiFi network is configured for the camera, the camera’s own WiFi hotspot will be hidden.

APP Live Streaming Interface

Video Playback

Warm Tips:
Need to insert a microSD card to playback, only supports microSD cards with a reading speed above Class 10.

Sleeping Power-Saving Mode

1. Low-power consumption mode
   After successful networking, the camera enters the low-power consumption mode by default with blue light always on. （ Blue light flashes slowly with the memory card inserted.）In this mode, if the app is quit and the camera is unable to sense the human body, the device will go to sleep within 30 seconds with the light going off. In the state of sleep, the power consumption of the camera is less than 1mH/h. The camera will automatically wake up and start recording when sensing the human body or when the APP is open.

2. Full-time recording mode
   Please turn on the “Device not sleep” function if you need the camera to 24/7 loop recording.

Open/Close Infrared Night Vision Function

This camera has a built-in light sensor and automatically turns the night vision ON/OFF according to the ambient brightness, and you can also turn the night vision ON/OFF manually by clicking on “Set Ir LED manually”.

Note: Default auto night vision does not work if manual night vision switch is selected

Motion Detection

After successful networking, motion detection alerts are on by default, the app will send out alerts when there’s human activity on the surveillance screen. If you want to turn off this feature, please tap the setting in the upper right corner of the message list to stop receiving messages.

Device Share

Easy to share the live cameras with family or friends by following steps.

1. Device Setting>>Device share>>Copy the Invitation Code or Share QR Code
2. Download Mastercam to the phone of the person who wants to share the camera>>Add device>>Enter the invitation code or scan the QR code>>Enter the password to access>>Done

Q&A

• Q1: Why can’t the camera turn on normally?
  A1: The battery power is exhausted, please charge it.

• Q2: Why can’t I find the camera’s hotspot after turning on the camera?
  A2: Please check if the indicator light is on in red. If not, charge or reset the device.

• Q3: Why doesn’t the camera connect to the WiFi router?

  • Only support 2.4G WiFi;
  • Confirm that the name and password of WIFI is correct;
  • Please try to restore the factory settings and reconnect.

• Q4: Why can’t the phone receive alarm messages?
  A4:

  • Make sure the “receive messages” is on;
  • Make sure the camera is properly configured for network;
  • Confirm that the “Notification Management” permission of the APP in the phone “Settings” has been opened.

• Q5: Why can’t the device read the memory card?
  A5: Please format the sd card before using.

Product parameter

to 45 days standby.

Support system| iOS, Android
Battery charge time| 6 hours
Charging voltage| DC-5V/1A

Warning:

1. Applicable occasion: Please strictly abide by relevant national laws and regulations.
2. Do not use the product illegally, otherwise, the consequences are at your own expense.

Warranty and Money Back:

1. Camera comes with 12 months Warranty or Replacement and 30 days money back.
2. For replacement, you should return the defective camera to us, tell us the defective reasons and provide your order ID for us. Support: vionmio@hotmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>